From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Chiappero Date: Sat, 13 Sep 2008 15:43:46 +0000 Subject: Re: [lm-sensors] New Asus board and multiple sensors chips Message-Id: <48CBDFB2.2040304@absence.it> List-Id: References: <48CA5C05.8040307@absence.it> In-Reply-To: <48CA5C05.8040307@absence.it> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Marco Chiappero ha scritto: > Now, in this board the first one has been replaced by the new Winbond > W83667HG and it works thank to the trick of loading the w83627ehf driver > with the force_id=0x8860 option (but a its own driver is on the way, > right?). Starting from kernel 2.6.26 the coretemp driver works fine, but > my cpu isn't recognized by sensors-detect ("Sorry, no sensors were > detected", with lm-sensors 3.0.0) probably because I own a brand new > E8600 Intel CPU which is a E0 revision. I haven't tried lm-sensors 3.0.2 > though. > For what concerns the other two sensors chips I can modprobe the > w83781, w83791d, w83792d, w83793 and adt7473 modules but running sensors > or sensors-detect shows no new sensors at all. Unfortunately adt7475 > driver is not the upstream kernels yet. Having some spare time I gave a try to the lastest sensors-detect patched for the w83667hg and both the coretemp and the new winbond chip are now detected. I also compiled the adt7475 driver, it loads fine but no sensors are show/discovered. Maybe is a specific address needed? Marco Chiappero _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors