From: Brice Goglin <brice@myri.com>
To: Jeff Garzik <jeff@garzik.org>, netdev@vger.kernel.org
Subject: [PATCH 2.6.28] myri10ge: use DCA if DCA is compiled as a module
Date: Sat, 13 Sep 2008 22:30:06 +0200 [thread overview]
Message-ID: <48CC22CE.8050608@myri.com> (raw)
Use DCA in myri10ge when CONFIG_DCA_MODULE is set as well.
Signed-off-by: Brice Goglin <brice@myri.com>
---
drivers/net/myri10ge/myri10ge.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
Index: linux-2.6.git/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-2.6.git.orig/drivers/net/myri10ge/myri10ge.c 2008-09-13 22:22:12.000000000 +0200
+++ linux-2.6.git/drivers/net/myri10ge/myri10ge.c 2008-09-13 22:23:43.000000000 +0200
@@ -189,7 +189,7 @@
dma_addr_t fw_stats_bus;
int watchdog_tx_done;
int watchdog_tx_req;
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
int cached_dca_tag;
int cpu;
__be32 __iomem *dca_tag;
@@ -221,7 +221,7 @@
int msi_enabled;
int msix_enabled;
struct msix_entry *msix_vectors;
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
int dca_enabled;
#endif
u32 link_state;
@@ -905,7 +905,7 @@
struct myri10ge_slice_state *ss;
int i, status;
size_t bytes;
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
unsigned long dca_tag_off;
#endif
@@ -1015,7 +1015,7 @@
}
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
dca_tag_off = cmd.data0;
for (i = 0; i < mgp->num_slices; i++) {
@@ -1054,7 +1054,7 @@
return status;
}
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
static void
myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
{
@@ -1508,7 +1508,7 @@
struct net_device *netdev = ss->mgp->dev;
int work_done;
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
if (ss->mgp->dca_enabled)
myri10ge_update_dca(ss);
#endif
@@ -1739,7 +1739,7 @@
"tx_boundary", "WC", "irq", "MSI", "MSIX",
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
"serial_number", "watchdog_resets",
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
"dca_capable_firmware", "dca_device_present",
#endif
"link_changes", "link_up", "dropped_link_overflow",
@@ -1818,7 +1818,7 @@
data[i++] = (unsigned int)mgp->read_write_dma;
data[i++] = (unsigned int)mgp->serial_number;
data[i++] = (unsigned int)mgp->watchdog_resets;
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
data[i++] = (unsigned int)(mgp->dca_enabled);
#endif
@@ -4040,7 +4040,7 @@
dev_err(&pdev->dev, "failed reset\n");
goto abort_with_slices;
}
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
myri10ge_setup_dca(mgp);
#endif
pci_set_drvdata(pdev, mgp);
@@ -4144,7 +4144,7 @@
netdev = mgp->dev;
unregister_netdev(netdev);
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
myri10ge_teardown_dca(mgp);
#endif
myri10ge_dummy_rdma(mgp, 0);
@@ -4189,7 +4189,7 @@
#endif
};
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
static int
myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
{
@@ -4220,7 +4220,7 @@
myri10ge_driver.name, myri10ge_rss_hash);
myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
}
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
dca_register_notify(&myri10ge_dca_notifier);
#endif
if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
@@ -4233,7 +4233,7 @@
static __exit void myri10ge_cleanup_module(void)
{
-#ifdef CONFIG_DCA
+#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
dca_unregister_notify(&myri10ge_dca_notifier);
#endif
pci_unregister_driver(&myri10ge_driver);
next reply other threads:[~2008-09-13 20:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-13 20:30 Brice Goglin [this message]
2008-09-13 20:38 ` [PATCH 2.6.28] myri10ge: use DCA if DCA is compiled as a module Brice Goglin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48CC22CE.8050608@myri.com \
--to=brice@myri.com \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.