From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <48D264B6.6080504@domain.hid> Date: Thu, 18 Sep 2008 16:24:54 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <217b7eb20809180614u28d04ef8vc63fadb0b7db1ae9@domain.hid> <48D255E0.7000603@domain.hid> <217b7eb20809180722w423f78b2qb4d7db0bfb248953@domain.hid> In-Reply-To: <217b7eb20809180722w423f78b2qb4d7db0bfb248953@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Adeos-main] adeos-ipipe-2.6.19-arm-1.7-00 on iMX31: init doesn't complete! List-Id: General discussion about Adeos List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Hank Cc: adeos-main@gna.org Hank wrote: > On 9/18/08, Gilles Chanteperdrix wrote: >> Hank wrote: >>> Hello Guys, >>> I'm porting xenomai to Freescale iMX31 processor (on iMX31 LiteKit) as >> per >>> porting guidelines. In the first phase, applied >>> adeos-ipipe-2.6.19-arm-1.7-00 patch found in xenomai-2.4.4 to kernel >>> 2.6.19.2 and have implemented required machine specific code. Everything >>> went smooth and after fixing a few bugs, kernel booted but with a problem >> - >>> init doesn't complete. Following are last few kernel boot log messages: >>> >>> >>> Looking up port of RPC 100003/2 on 192.168.1.25 >>> Looking up port of RPC 100005/1 on 192.168.1.25 >>> VFS: Mounted root (nfs filesystem). >>> Freeing init memory: 120K >> Since you are booting via NFS, wireshark may help ? >> >> Do you have the same problem if you disable support for VFP ? >> >> -- >> Gilles. > > Thanks Gilles. > > I've tried everything. Wireshark shows NFS read requests being issued and > busybox etc. being sent back. Already played with VFP without any luck! And the advice in the "tips and tricks" section of the howto ? -- Gilles.