All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Coles <jcoles0727@rogers.com>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Still unclear how to use Hauppage HVR-950 and v4l-dvb
Date: Sun, 21 Sep 2008 10:22:55 -0400	[thread overview]
Message-ID: <48D658BF.7040807@rogers.com> (raw)

It would really help if there was a single set of instructions specific 
to the HVR-950 with tests at each stage. I'm really confused as to the 
status of my installation.

I compiled the firmware according to the instructions on 
http://linuxtv.org/repo/. The result:

$ lsusb
Bus 005 Device 002: ID 2040:7200 Hauppauge

On the other hand, dmesg reports:

[   17.247610] usb 5-2: new high speed USB device using ehci_hcd and 
address 2
[   17.380387] usb 5-2: unable to read config index 0 descriptor/all
[   17.380434] usb 5-2: can't read configurations, error -71

Is my firmware is properly installed or not?

I'm trying to follow the instructions on your 
*How_to_install_DVB_device_drivers* wiki, but some vital details are 
missing. Which modules do I look for in lsmod? The 
Hauppauge_Computer_Works Wiki doesn't provide this information for the 
HVR-950. The instructions at 
http://u32.net/MythTV/WinTV-HVR-950/index.html indicate that the 
required modules are either em28xx or au0828 and au8522. I have 
modprobe'd these, but still have nothing in /dev/dvb.

Any ideas as to what I am missing or how I can troubleshoot this?



_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-09-21 14:23 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-21 14:22 Jonathan Coles [this message]
2008-09-21 14:30 ` [linux-dvb] Still unclear how to use Hauppage HVR-950 and v4l-dvb Devin Heitmueller
2008-09-21 14:46   ` Michael Krufky
2008-09-21 15:44     ` Jonathan Coles
2008-09-21 16:11       ` Michael Krufky
2008-09-21 17:03         ` Steven Toth
2008-09-21 17:17         ` Jonathan Coles
2008-09-21 15:52 ` BOUWSMA Barry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48D658BF.7040807@rogers.com \
    --to=jcoles0727@rogers.com \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.