All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Alain M." <alainm@pobox.com>
To: dosEmu-list <linux-msdos@vger.kernel.org>
Subject: Re: Quick Networking Support Question.
Date: Mon, 22 Sep 2008 17:34:32 -0300	[thread overview]
Message-ID: <48D80158.8060103@pobox.com> (raw)
In-Reply-To: <23fd749a0809221152u6ed2d0f9u6b116d51e1fe5d12@mail.gmail.com>

Dosemu alrady has a packet driver, so you do not install one.

What you need is to configure tun/tap and a bridge On linux to be used
by dosemu. that is all :)

Alain

Andrew Joakimsen escreveu:
> Is it or is it not possible? WHICH packet driver is the question I am
> trying to figure out! Theres no such thing as a standard or generic
> network card. So if dosemu support networking it has to emulate some
> LAN adapter. Obviously this has to do with the "packet driver" but I
> have not figured out or seen anywhere WHICH PRECISE "packet driver" to
> be using. There should be an oeminfo.inf file and some .SYS file....
> That should get me on the network.
> 
> 
> ---------- Forwarded message ----------
> From: Stu <stu.axon@gmail.com>
> Date: 2008/9/22
> Subject: Re: Quick Networking Support Question.
> To: Andrew Joakimsen <joakimsen@gmail.com>
> 
> 
> Not low level enough support for what you want to do, but i think
> somebody was working on someth linking it with samba or someth.
> Otherwise its possible to use the netware style networking in dosemu
> using the packet driver, ftp and even web with arachne may be possible
> 
> On 9/22/08, Andrew Joakimsen <joakimsen@gmail.com> wrote:
>> So there is not "network support" in dosemu?
>>
>> On Mon, Sep 22, 2008 at 1:27 PM, Rafał Cygnarowski <rafilists@gmail.com>
>> wrote:
>>> Dnia sobota, 20 września 2008, Andrew Joakimsen napisał:
>>>
>>>> This is very simple: I enable network support in dosemu, which driver
>>>> do I use in the MS Networking Client ( I am running MS-DOS 6.22)?
>>>> I have read the documentation, but it didn"t help me.
>>>> I installed MS-DOS 6.22 under VirtualBox, everything works fine there
>>>> including the network. I copied this over to dosemu and now it says
>>>> the LAN card is not found, so dosemu doesn"t emulate the AMD LAN II
>>>> hardware.... what is the driver to use?
>>> There's no network card in dosemu you could use. There's only one way to
>>> talk to your host network card - through a packet driver, but AFAIK you
>>> won't be able to run MS Client anyway (you'll need some ndis to packet
>>> driver "adapter" which just doesn't exists).
>>>
>>> If you need use dosemu to connect to some windows/samba resource, then
>>> take
>>>
>>> a look at http://pascalek.pers.pl/en/propage/samba4dosemu-introduction.
>>>
>>> Regards,
>>>
>>> --
>>>
>>> Rafał Cygnarowski
>>>
>>> rafilists [at] gmail [dot] com
> 
> --
> Sent from Google Mail for mobile | mobile.google.com
> N�����r��y���b�X��ǧv�^�)޺{.n�+����{���h�)���w*\x1fjg���\x1e�����ݢj/���z�ޖ��2�ޙ���&�)ߡ�a��\x7f��\x1e�G���h�\x0f�j:+v���w�٥

--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2008-09-22 20:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-20 15:56 Quick Networking Support Question Andrew Joakimsen
     [not found] ` <200809221927.08074.rafilists@gmail.com>
2008-09-22 18:05   ` Andrew Joakimsen
     [not found]     ` <838f4dc10809221131i59e57253u20bab055b67d839b@mail.gmail.com>
2008-09-22 18:52       ` Andrew Joakimsen
2008-09-22 19:13         ` Ivan Baldo
2008-09-22 19:19         ` Frank Cox
2008-09-22 20:34         ` Alain M. [this message]
2008-09-22 20:46           ` Stu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48D80158.8060103@pobox.com \
    --to=alainm@pobox.com \
    --cc=linux-msdos@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.