[U-Boot] [PATCH v3] [83xx] Adds two more ethernet interface to 83xx

[richardretanubun <richardretanubun@ruggedcom.com>]

Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
Six eth interface is chosen because the platform I am using combines
UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.

Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
---
Thank you for all the feedback guys,
version 3 removes the extra #ifdef CONFIG_HAS_ETH0 from common/cmd_bdinfo.c

 README                   |    3 ++
 common/cmd_bdinfo.c      |   14 +++++++++++++
 common/env_common.c      |    6 +++++
 common/env_embedded.c    |    6 +++++
 cpu/mpc83xx/fdt.c        |    3 +-
 drivers/qe/uec.c         |   48 +++++++++++++++++++++++++++++++++++++++++++++-
 include/asm-ppc/u-boot.h |    6 +++++
 lib_ppc/board.c          |   30 ++++++++++++++++++++++++++++
 net/eth.c                |    6 +++++
 tools/env/fw_env.c       |    6 +++++
 10 files changed, 126 insertions(+), 2 deletions(-)

diff --git a/README b/README
index ccd839c..8802304 100644
--- a/README
+++ b/README
@@ -1095,8 +1095,11 @@ The following options need to be configured:
 
 - Ethernet address:
 		CONFIG_ETHADDR
+		CONFIG_ETH1ADDR
 		CONFIG_ETH2ADDR
 		CONFIG_ETH3ADDR
+		CONFIG_ETH4ADDR
+		CONFIG_ETH5ADDR
 
 		Define a default value for Ethernet address to use
 		for the respective Ethernet interface, in case this
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index f4d9d40..5018930 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -117,6 +117,20 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 #endif
 
+#if defined(CONFIG_HAS_ETH4)
+       puts ("\neth4addr    =");
+       for (i=0; i<6; ++i) {
+		printf ("%c%02X", i ? ':' : ' ', bd->bi_enet4addr[i]);
+	}
+#endif
+
+#if defined(CONFIG_HAS_ETH5)
+       puts ("\neth5addr    =");
+       for (i=0; i<6; ++i) {
+		printf ("%c%02X", i ? ':' : ' ', bd->bi_enet5addr[i]);
+	}
+#endif
+
 #ifdef CONFIG_HERMES
 	print_str ("ethspeed",	    strmhz(buf, bd->bi_ethspeed));
 #endif
diff --git a/common/env_common.c b/common/env_common.c
index 77f9944..0fee3af 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -91,6 +91,12 @@ uchar default_environment[] = {
 #ifdef	CONFIG_ETH3ADDR
 	"eth3addr="	MK_STR(CONFIG_ETH3ADDR)		"\0"
 #endif
+#ifdef	CONFIG_ETH4ADDR
+	"eth4addr="	MK_STR(CONFIG_ETH4ADDR)		"\0"
+#endif
+#ifdef	CONFIG_ETH5ADDR
+	"eth5addr="	MK_STR(CONFIG_ETH5ADDR)		"\0"
+#endif
 #ifdef	CONFIG_IPADDR
 	"ipaddr="	MK_STR(CONFIG_IPADDR)		"\0"
 #endif
diff --git a/common/env_embedded.c b/common/env_embedded.c
index 77e5619..e79f843 100644
--- a/common/env_embedded.c
+++ b/common/env_embedded.c
@@ -135,6 +135,12 @@ env_t environment __PPCENV__ = {
 #ifdef	CONFIG_ETH3ADDR
 	"eth3addr="	MK_STR(CONFIG_ETH3ADDR)		"\0"
 #endif
+#ifdef	CONFIG_ETH4ADDR
+	"eth4addr="	MK_STR(CONFIG_ETH4ADDR)		"\0"
+#endif
+#ifdef	CONFIG_ETH5ADDR
+	"eth5addr="	MK_STR(CONFIG_ETH5ADDR)		"\0"
+#endif
 #ifdef	CONFIG_ETHPRIME
 	"ethprime="	CONFIG_ETHPRIME			"\0"
 #endif
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index 39bd9dc..3e3e1c8 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -52,7 +52,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 		fdt_fixup_crypto_node(blob, 0x0204);
 
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
-    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
+    defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
 	fdt_fixup_ethernet(blob);
 #endif
 
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 344c649..e1dec5e 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -123,8 +123,54 @@ static uec_info_t eth4_uec_info = {
 	.enet_interface		= CFG_UEC4_INTERFACE_MODE,
 };
 #endif
+#ifdef CONFIG_UEC_ETH5
+static uec_info_t eth5_uec_info = {
+	.uf_info		= {
+		.ucc_num	= CFG_UEC5_UCC_NUM,
+		.rx_clock	= CFG_UEC5_RX_CLK,
+		.tx_clock	= CFG_UEC5_TX_CLK,
+		.eth_type	= CFG_UEC5_ETH_TYPE,
+	},
+#if (CFG_UEC5_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
+	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
+	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.tx_bd_ring_len		= 16,
+	.rx_bd_ring_len		= 16,
+	.phy_address		= CFG_UEC5_PHY_ADDR,
+	.enet_interface		= CFG_UEC5_INTERFACE_MODE,
+};
+#endif
+#ifdef CONFIG_UEC_ETH6
+static uec_info_t eth6_uec_info = {
+	.uf_info		= {
+		.ucc_num	= CFG_UEC6_UCC_NUM,
+		.rx_clock	= CFG_UEC6_RX_CLK,
+		.tx_clock	= CFG_UEC6_TX_CLK,
+		.eth_type	= CFG_UEC6_ETH_TYPE,
+	},
+#if (CFG_UEC6_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
+	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
+	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.tx_bd_ring_len		= 16,
+	.rx_bd_ring_len		= 16,
+	.phy_address		= CFG_UEC6_PHY_ADDR,
+	.enet_interface		= CFG_UEC6_INTERFACE_MODE,
+};
+#endif
 
-#define MAXCONTROLLERS	(4)
+#define MAXCONTROLLERS	(6)
 
 static struct eth_device *devlist[MAXCONTROLLERS];
 
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 54ac01d..7451905 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -111,6 +111,12 @@ typedef struct bd_info {
 #ifdef CONFIG_HAS_ETH3
 	unsigned char   bi_enet3addr[6];
 #endif
+#ifdef CONFIG_HAS_ETH4
+	unsigned char   bi_enet4addr[6];
+#endif
+#ifdef CONFIG_HAS_ETH5
+	unsigned char   bi_enet5addr[6];
+#endif
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
     defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index c02ac62..d440722 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -944,6 +944,36 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	}
 #endif
 
+#ifdef CONFIG_HAS_ETH4
+	/* handle 5th ethernet address */
+	s = getenv("eth4addr");
+#if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF)
+	if (s == NULL)
+		board_get_enetaddr(bd->bi_enet4addr);
+	else
+#endif
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enet4addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+#endif
+
+#ifdef CONFIG_HAS_ETH5
+	/* handle 6th ethernet address */
+	s = getenv("eth5addr");
+#if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF)
+	if (s == NULL)
+		board_get_enetaddr(bd->bi_enet5addr);
+	else
+#endif
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enet5addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+#endif
+
 #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
     defined(CONFIG_TQM8272) || \
     defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
diff --git a/net/eth.c b/net/eth.c
index 432dd60..ccd871a 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -180,6 +180,12 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_UEC_ETH4)
 	uec_initialize(3);
 #endif
+#if defined(CONFIG_UEC_ETH5)
+	uec_initialize(4);
+#endif
+#if defined(CONFIG_UEC_ETH6)
+	uec_initialize(5);
+#endif
 
 #if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 	fec_initialize(bis);
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 46747d3..6e9c34f 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -157,6 +157,12 @@ static char default_environment[] = {
 #ifdef	CONFIG_ETH3ADDR
 	"eth3addr=" MK_STR (CONFIG_ETH3ADDR) "\0"
 #endif
+#ifdef	CONFIG_ETH4ADDR
+	"eth4addr=" MK_STR (CONFIG_ETH4ADDR) "\0"
+#endif
+#ifdef	CONFIG_ETH5ADDR
+	"eth5addr=" MK_STR (CONFIG_ETH5ADDR) "\0"
+#endif
 #ifdef	CONFIG_ETHPRIME
 	"ethprime=" CONFIG_ETHPRIME "\0"
 #endif
-- 
1.5.5.GIT