From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <48EA2E4B.3060206@domain.hid> Date: Mon, 06 Oct 2008 17:27:07 +0200 From: Philippe Gerum MIME-Version: 1.0 References: <7ed3bc8b0809171347j6744978ck69959990435942ea@domain.hid> <48D176F0.7060805@domain.hid> <894886ec0809181640t3d413a73h5c02da73dc3000c9@domain.hid> <48D34936.7090206@domain.hid> <894886ec0809191008m3b1eac19s45a1d67316eba626@domain.hid> <48D62445.6090305@domain.hid> <894886ec0810012245i679ab8f7o44ae6f50efcc853f@domain.hid> <48E494BF.3030600@domain.hid> <894886ec0810030900w7ddee1enee8d12529ba910d8@domain.hid> In-Reply-To: <894886ec0810030900w7ddee1enee8d12529ba910d8@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Xenomai IRQ Disable Reply-To: rpm@xenomai.org List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Rob Wheeler Cc: soa@domain.hid, Jan Kiszka , xenomai@xenomai.org Rob Wheeler wrote: > On Thu, Oct 2, 2008 at 2:30 AM, Philippe Gerum wrote: >> Please send the .config file, and confirm that we are still talking about the >> adeos-ipipe-2.6.24-x86-2.0-07 patch over 2.6.24.3. > > Philippe, > > I've attached my config file and yes it is 2.0-07 over 2.6.24.3. I'll > try your suggested experiment of patching with ipipe and disabling > xenomai and report the results soon. > 2.6.24 suffers the known problem of reading the PCI config inside critical I-pipe paths, so could you try disabling CONFIG_PCI_MSI from your config and boot without irqpoll? TIA, -- Philippe.