From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <48EB4BD8.10207@domain.hid> Date: Tue, 07 Oct 2008 13:45:28 +0200 From: Philippe Gerum MIME-Version: 1.0 References: <48E3541E.8090808@domain.hid> <48E66224.7060709@domain.hid> <48EA1127.6030405@domain.hid> <48EB4B64.4020209@domain.hid> In-Reply-To: <48EB4B64.4020209@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Error while building Xenomai on Powerpc with instrument function entries enabled Reply-To: rpm@xenomai.org List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Giammarco Zacheo Cc: xenomai-help Philippe Gerum wrote: > Giammarco Zacheo wrote: >> Thank you. There's no hurry actually, just reporting the bug. >> >> If there's something I can do to help... >> > > I have no efika board at hand, but just booted a plain lite5200 IceCube > successfully, with all tracing options enabled. This is a DENX-originated kernel > (tagged "DENX-v2.6.26-stable") from the usual place. > > Looking again to the trace output you got, I wonder now if the device tree file > you are using is ok. Could you confirm that your board boots with the I-pipe > support fully disabled? > And if so, does it still boot with the I-pipe support enabled and the I-pipe latency tracing option disabled? -- Philippe.