From: Chris Snook <csnook@redhat.com>
To: Andrew Morton <akpm@linux-foundation.org>, jie.yang@atheros.com
Cc: atl1-devel@lists.sourceforge.net, netdev@vger.kernel.org,
nm127@freemail.hu, bugme-daemon@bugzilla.kernel.org
Subject: Re: [atl1-devel] [Bugme-new] [Bug 11736] New: atl1e: INFO: inconsistent lock state
Date: Fri, 10 Oct 2008 17:31:43 -0400 [thread overview]
Message-ID: <48EFC9BF.3020806@redhat.com> (raw)
In-Reply-To: <20081010142342.afe1cbb1.akpm@linux-foundation.org>
Copying Jie Yang, the atl1e author, as I'm not certain he's on atl1-devel.
Jie --
What do you make of this?
-- Chris
Andrew Morton wrote:
> (switched to email. Please respond via emailed reply-to-all, not via the
> bugzilla web interface).
>
> On Fri, 10 Oct 2008 14:14:12 -0700 (PDT)
> bugme-daemon@bugzilla.kernel.org wrote:
>
>> http://bugzilla.kernel.org/show_bug.cgi?id=11736
>>
>> Summary: atl1e: INFO: inconsistent lock state
>> Product: Drivers
>> Version: 2.5
>> KernelVersion: 2.6.27
>> Platform: All
>> OS/Version: Linux
>> Tree: Mainline
>> Status: NEW
>> Severity: normal
>> Priority: P1
>> Component: Network
>> AssignedTo: jgarzik@pobox.com
>> ReportedBy: nm127@freemail.hu
>>
>>
>> Latest working kernel version:
>> Earliest failing kernel version:
>> Distribution: Debian
>> Hardware Environment: eeePC 901
>> Software Environment:
>> Problem Description:
>> At boot the following message appears in the dmesg:
>>
>> [ 10.926640] ATL1E 0000:04:00.0: PCI INT A -> Link[LNKB] -> GSI 5 (level,
>> low) -> IRQ 5
>> [ 10.941823] ATL1E 0000:04:00.0: setting latency timer to 64
>> [ 42.441150]
>> [ 42.441156] =================================
>> [ 42.450029] [ INFO: inconsistent lock state ]
>> [ 42.450029] 2.6.27 #1
>> [ 42.450029] ---------------------------------
>> [ 42.450029] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage.
>> [ 42.450029] ifconfig/1315 [HC1[1]:SC0[0]:HE0:SE1] takes:
>> [ 42.450029] (&adapter->mdio_lock){+-..}, at: [<f89e4499>]
>> atl1e_intr+0x2a9/0x440 [atl1e]
>> [ 42.450029] {hardirq-on-W} state was registered at:
>> [ 42.450029] [<c0139364>] mark_lock+0xf4/0x830
>> [ 42.450029] [<c013a459>] __lock_acquire+0x2e9/0x1380
>> [ 42.450029] [<c02a2bbf>] pci_conf1_read+0xaf/0xf0
>> [ 42.450029] [<c0139cc9>] debug_check_no_locks_freed+0x79/0x130
>> [ 42.450029] [<c0139c24>] trace_hardirqs_on_caller+0xa4/0xc0
>> [ 42.450029] [<c013b54d>] lock_acquire+0x5d/0x80
>> [ 42.450029] [<f89e831b>] atl1e_probe+0x48b/0x6d0 [atl1e]
>> [ 42.450029] [<c0305e60>] _spin_lock+0x30/0x40
>> [ 42.450029] [<f89e831b>] atl1e_probe+0x48b/0x6d0 [atl1e]
>> [ 42.450029] [<f89e831b>] atl1e_probe+0x48b/0x6d0 [atl1e]
>> [ 42.450029] [<c01ef988>] pci_match_device+0xa8/0xc0
>> [ 42.450029] [<c01efd26>] pci_device_probe+0x56/0x80
>> [ 42.450029] [<c025a375>] driver_probe_device+0x75/0x150
>> [ 42.450029] [<c0139c24>] trace_hardirqs_on_caller+0xa4/0xc0
>> [ 42.450029] [<c025a4c2>] __driver_attach+0x72/0x80
>> [ 42.450029] [<c0259a3c>] bus_for_each_dev+0x3c/0x60
>> [ 42.450029] [<c025a1e6>] driver_attach+0x16/0x20
>> [ 42.450029] [<c025a450>] __driver_attach+0x0/0x80
>> [ 42.450029] [<c0259e92>] bus_add_driver+0xb2/0x230
>> [ 42.450029] [<c01ef820>] pci_device_shutdown+0x0/0x20
>> [ 42.450029] [<c01efc70>] pci_device_remove+0x0/0x40
>> [ 42.450029] [<c025a64d>] driver_register+0x4d/0x120
>> [ 42.450029] [<c01ea6a2>] __spin_lock_init+0x32/0x70
>> [ 42.450029] [<f8860000>] snd_mixer_oss_conv+0x0/0x50 [snd_mixer_oss]
>> [ 42.450029] [<c01eff88>] __pci_register_driver+0x58/0xa0
>> [ 42.450029] [<f8860000>] snd_mixer_oss_conv+0x0/0x50 [snd_mixer_oss]
>> [ 42.450029] [<c0101122>] do_one_initcall+0x32/0x160
>> [ 42.450029] [<c0145530>] disable_irq+0x0/0x30
>> [ 42.450029] [<c0304ac5>] __mutex_unlock_slowpath+0x95/0xe0
>> [ 42.450029] [<c0143429>] sys_init_module+0x89/0x1b0
>> [ 42.450029] [<c0139c24>] trace_hardirqs_on_caller+0xa4/0xc0
>> [ 42.450029] [<c01de344>] trace_hardirqs_on_thunk+0xc/0x10
>> [ 42.450029] [<c01030d6>] syscall_call+0x7/0xb
>> [ 42.450029] [<ffffffff>] 0xffffffff
>> [ 42.450029] irq event stamp: 4564
>> [ 42.450029] hardirqs last enabled at (4563): [<c01652b5>]
>> kmem_cache_free+0x65/0x90
>> [ 42.450029] hardirqs last disabled at (4564): [<c01de354>]
>> trace_hardirqs_off_thunk+0xc/0x18
>> [ 42.450029] softirqs last enabled at (4532): [<c02b1d1c>]
>> dev_change_flags+0x5c/0x1a0
>> [ 42.450029] softirqs last disabled at (4530): [<c0305e7b>]
>> _spin_lock_bh+0xb/0x40
>> [ 42.450029]
>> [ 42.450029] other info that might help us debug this:
>> [ 42.450029] 1 lock held by ifconfig/1315:
>> [ 42.450029] #0: (rtnl_mutex){--..}, at: [<c02ed5c1>]
>> devinet_ioctl+0xf1/0x670
>> [ 42.450029]
>> [ 42.450029] stack backtrace:
>> [ 42.450029] Pid: 1315, comm: ifconfig Not tainted 2.6.27 #1
>> [ 42.450029] [<c0138944>] print_usage_bug+0x174/0x190
>> [ 42.450029] [<c01399c5>] mark_lock+0x755/0x830
>> [ 42.450029] [<c013ac85>] __lock_acquire+0xb15/0x1380
>> [ 42.450029] [<c013a5be>] __lock_acquire+0x44e/0x1380
>> [ 42.450029] [<c013a5be>] __lock_acquire+0x44e/0x1380
>> [ 42.450029] [<c013b54d>] lock_acquire+0x5d/0x80
>> [ 42.450029] [<f89e4499>] atl1e_intr+0x2a9/0x440 [atl1e]
>> [ 42.450029] [<c0305e60>] _spin_lock+0x30/0x40
>> [ 42.450029] [<f89e4499>] atl1e_intr+0x2a9/0x440 [atl1e]
>> [ 42.450029] [<f89e4499>] atl1e_intr+0x2a9/0x440 [atl1e]
>> [ 42.450029] [<c0306246>] _spin_lock_irqsave+0x46/0x60
>> [ 42.450029] [<c0144fa0>] handle_IRQ_event+0x20/0x60
>> [ 42.450029] [<c01467fd>] handle_level_irq+0x6d/0xe0
>> [ 42.450029] [<c0104f63>] do_IRQ+0x53/0xa0
>> [ 42.450029] [<c0103280>] common_interrupt+0x28/0x30
>> [ 42.450029] [<f89e53c4>] atl1e_up+0x424/0x4a0 [atl1e]
>> [ 42.450029] [<f89e41f0>] atl1e_intr+0x0/0x440 [atl1e]
>> [ 42.450029] [<c0145985>] request_irq+0xa5/0xc0
>> [ 42.450029] [<f89e5c5d>] atl1e_open+0xdd/0x390 [atl1e]
>> [ 42.450029] [<c02b3b44>] dev_open+0x54/0xb0
>> [ 42.450029] [<c02b1d1c>] dev_change_flags+0x5c/0x1a0
>> [ 42.450029] [<c011f82b>] local_bh_enable_ip+0x6b/0xb0
>> [ 42.450029] [<c02b1d3e>] dev_change_flags+0x7e/0x1a0
>> [ 42.450029] [<c02ed9de>] devinet_ioctl+0x50e/0x670
>> [ 42.450029] [<c02a4f5f>] sock_ioctl+0xcf/0x250
>> [ 42.450029] [<c02a4e90>] sock_ioctl+0x0/0x250
>> [ 42.450029] [<c017448f>] vfs_ioctl+0x1f/0x70
>> [ 42.450029] [<c0110eb3>] do_page_fault+0xf3/0x680
>> [ 42.450029] [<c017453c>] do_vfs_ioctl+0x5c/0x260
>> [ 42.450029] [<c017477d>] sys_ioctl+0x3d/0x70
>> [ 42.450029] [<c01030d6>] syscall_call+0x7/0xb
>> [ 42.450029] =======================
>> [ 42.916493] ATL1E 0000:04:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full
>> Duplex>
>>
>> Steps to reproduce: boot the system
>>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> atl1-devel mailing list
> atl1-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/atl1-devel
next prev parent reply other threads:[~2008-10-10 21:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-11736-10286@http.bugzilla.kernel.org/>
2008-10-10 21:23 ` [Bugme-new] [Bug 11736] New: atl1e: INFO: inconsistent lock state Andrew Morton
2008-10-10 21:31 ` Chris Snook [this message]
2008-10-11 0:11 ` [atl1-devel] " Jay Cliburn
2008-10-11 1:47 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48EFC9BF.3020806@redhat.com \
--to=csnook@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=atl1-devel@lists.sourceforge.net \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=jie.yang@atheros.com \
--cc=netdev@vger.kernel.org \
--cc=nm127@freemail.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.