From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <48F73A6D.7000607@domain.hid> Date: Thu, 16 Oct 2008 14:58:21 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Need some help getting past an List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: ken barnett Cc: xenomai@xenomai.org ken barnett wrote: > Hope you can help. > > My configuration is as follows: > PXA25xx ADS card w/ NO PCI bridge > Linux-2.6.24.5 kernel > Xenomai 2.4.5 stable > > The Xenomai port to the kernel is as follows: > > ./prepare-kernel.sh linux=../../linux-2.6.24.5 > --adeos=adeos-ipipe-2.6.24-arm-1.9-00.patch > --adeos=adeos-ipipe-2.6.24-arm-1.9-01.patch --arch=arm > > ./xenomai-2.4.5/scripts/prepare-kernel.sh --linux=linux-2.6.24.5 > --adeos=./xenomai-2.4.5/ksrc/arch/arm/patches/ > adeos-ipipe-2.6.24-arm-1.9-01.patch > > I used 2 patches but have tried to use either/or with the > same indications. > > configure CC=arm-linux-gcc --enable-arm-eabi > --prefix=/home/dvdb-lite/rootfs/usr/xenomai --host=arm-linux > --enable-arm-arch=pxa > > See attached for the output log. > > Step 1: > Looking at post from July 05, 2008 - 12:26: it states to turn on full debug to > get the best output so that output file is attached also as debug1.log > > Step 2 > Then it stated to turn off Xenomai all together: > The log looks the same but is also attached as debug2.log > > Step 3 > Turn off ipipe altogether > The kernel/card is back to working. > > Hop you can help, I am afraid you forgot attachments, or url to them. -- Gilles.