From: Helmut Auer <vdr@helmutauer.de>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Problems with conexant CX24123/CX24109
Date: Sat, 18 Oct 2008 09:56:13 +0200 [thread overview]
Message-ID: <48F9969D.90305@helmutauer.de> (raw)
Hi,
I have a Geniatech PCI DVB-s with CX24123/CX24109.
This card cannot zap to the german ARD transponder, all other channels
are running fine.
The card runs fine under windows .
dmesg shows at loading:
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 10 (level,
low) -> IRQ 10
cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type -1
cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 10, latency: 165, mmio:
0xfc000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 10 (level,
low) -> IRQ 10
cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 10, latency: 64, mmio:
0xfd000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52]
cx88[0]/2: cx2388x based DVB/ATSC card
CX24123: detected CX24123
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Conexant CX24123/CX24109)...
and when the error occurs:
cx88[0]: irq mpeg [0x100000] ts_err?*
cx88[0]/2-mpeg: general errors: 0x00100000
Any hints where I can tune some parameters ?
--
Helmut Auer, helmut@helmutauer.de
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-10-18 7:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-18 7:56 Helmut Auer [this message]
2008-10-18 7:57 ` [linux-dvb] Problems with conexant CX24123/CX24109 Helmut Auer
2008-10-20 17:55 ` Helmut Auer
2008-10-20 18:29 ` Steven Toth
2008-10-20 20:23 ` Helmut Auer
2008-10-22 17:40 ` Helmut Auer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48F9969D.90305@helmutauer.de \
--to=vdr@helmutauer.de \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.