All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrej Podzimek <andrej@podzimek.org>
To: Darron Broad <darron@kewl.org>
Cc: Antti Palosaari <crope@iki.fi>, linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] MSI DigiVox mini II V3.0 stopped working
Date: Wed, 22 Oct 2008 03:39:04 +0200	[thread overview]
Message-ID: <48FE8438.7080804@podzimek.org> (raw)
In-Reply-To: <10307.1224636523@kewl.org>

>> One more little note about the firmware:
>>
>> 	[andrej@xandrej firmware]$ sha1sum dvb-usb-af9015.fw
>> 	6a0edcc65f490d69534d4f071915fc73f5461560  dvb-usb-af9015.fw
>>
>> That file can be found here: http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw
>>
>> Is it the right one? Shell I try something else?
> 
> Lo
> 
> try this patch (WARNING, although I have one of these devices
> and this looked to fix it, I have no idea what this actually means).

Many thanks for the patch! Now I know my device hasn't died.

Obviously, mentioning the member no_reconnect in the initializers of (the array of) struct dvb_usb_device_properties solved the problem. The device reset that normally occurs after firmware loading simply did not come when no_reconnect was left out from the initializers.

A piece of poetry:

	Oct 22 03:24:48 xandrej usb 4-2: new high speed USB device using ehci_hcd and address 12
	Oct 22 03:24:48 xandrej usb 4-2: configuration #1 chosen from 1 choice
	Oct 22 03:24:48 xandrej Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8
	Oct 22 03:24:48 xandrej input: Afatech DVB-T 2 as /class/input/input17
	Oct 22 03:24:48 xandrej input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-2
	Oct 22 03:24:49 xandrej af9015_usb_probe: interface:0
	Oct 22 03:24:49 xandrej af9015_read_config: IR mode:1
	Oct 22 03:24:49 xandrej af9015_read_config: TS mode:0
	Oct 22 03:24:49 xandrej af9015_read_config: [0] xtal:2 set adc_clock:28000
	Oct 22 03:24:49 xandrej af9015_read_config: [0] IF1:43000
	Oct 22 03:24:49 xandrej af9015_read_config: [0] MT2060 IF1:0
	Oct 22 03:24:49 xandrej af9015_read_config: [0] tuner id:156
	Oct 22 03:24:49 xandrej af9015_identify_state: reply:01
	Oct 22 03:24:49 xandrej dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
	Oct 22 03:24:49 xandrej firmware: requesting dvb-usb-af9015.fw
	Oct 22 03:24:49 xandrej dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
	Oct 22 03:24:49 xandrej af9015_download_firmware:
	Oct 22 03:24:49 xandrej dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
	Oct 22 03:24:49 xandrej dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
	Oct 22 03:24:49 xandrej DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
	Oct 22 03:24:49 xandrej af9015_af9013_frontend_attach: init I2C
	Oct 22 03:24:49 xandrej af9015_i2c_init:
	Oct 22 03:24:49 xandrej 00: 2b d3 9b 0b 00 00 00 00 a4 15 16 90 00 02 01 02
	Oct 22 03:24:49 xandrej 10: 03 80 00 fa fa 10 40 ef 01 30 31 30 31 31 30 31
	Oct 22 03:24:49 xandrej 20: 36 30 37 30 30 30 30 31 ff ff ff ff ff ff ff ff
	Oct 22 03:24:49 xandrej 30: 00 00 3a 01 00 08 02 00 f8 a7 00 00 9c ff ff ff
	Oct 22 03:24:49 xandrej 40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff
	Oct 22 03:24:49 xandrej 50: ff ff ff ff 10 26 00 00 04 03 09 04 10 03 41 00
	Oct 22 03:24:49 xandrej 60: 66 00 61 00 74 00 65 00 63 00 68 00 10 03 44 00
	Oct 22 03:24:49 xandrej 70: 56 00 42 00 2d 00 54 00 20 00 32 00 20 03 30 00
	Oct 22 03:24:49 xandrej 80: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30 00
	Oct 22 03:24:49 xandrej 90: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff ff
	Oct 22 03:24:49 xandrej a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
	Oct 22 03:24:49 xandrej b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
	Oct 22 03:24:49 xandrej c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
	Oct 22 03:24:49 xandrej d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
	Oct 22 03:24:49 xandrej e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
	Oct 22 03:24:49 xandrej f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
	Oct 22 03:24:49 xandrej af9013: firmware version:4.95.0
	Oct 22 03:24:49 xandrej DVB: registering frontend 0 (Afatech AF9013 DVB-T)...
	Oct 22 03:24:49 xandrej af9015_tuner_attach:
	Oct 22 03:24:49 xandrej tda18271 1-00c0: creating new instance
	Oct 22 03:24:49 xandrej TDA18271HD/C1 detected @ 1-00c0
	Oct 22 03:24:49 xandrej dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
	Oct 22 03:24:49 xandrej af9015_init:
	Oct 22 03:24:49 xandrej af9015_init_endpoint: USB speed:3
	Oct 22 03:24:49 xandrej af9015_download_ir_table:
	Oct 22 03:24:49 xandrej usbcore: registered new interface driver dvb_usb_af9015

It seems to be perfectly OK right now. Both video and sound work as usual in Kaffeine.

Andrej


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  reply	other threads:[~2008-10-22  1:39 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-21 19:07 [linux-dvb] MSI DigiVox mini II V3.0 stopped working Andrej Podzimek
2008-10-21 20:02 ` Antti Palosaari
2008-10-21 22:59   ` Andrej Podzimek
2008-10-21 23:18   ` Andrej Podzimek
2008-10-22  0:48     ` Darron Broad
2008-10-22  1:39       ` Andrej Podzimek [this message]
2008-10-22  9:37       ` Antti Palosaari
2008-10-22  9:42         ` Darron Broad
2008-10-22  9:33     ` Antti Palosaari
  -- strict thread matches above, loose matches on Subject: below --
2008-10-21 21:24 Sebastian Marskamp
2008-10-21 22:49 ` Andrej Podzimek
2008-10-22 17:09 Sebastian Marskamp

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48FE8438.7080804@podzimek.org \
    --to=andrej@podzimek.org \
    --cc=crope@iki.fi \
    --cc=darron@kewl.org \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.