From: Jeff Garzik <jeff@garzik.org>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Subject: Re: [PATCH] ata: Fix experimental tags
Date: Wed, 22 Oct 2008 20:37:57 -0400 [thread overview]
Message-ID: <48FFC765.7010905@garzik.org> (raw)
In-Reply-To: <20081021124529.31706.54794.stgit@localhost.localdomain>
Alan Cox wrote:
> From: Alan Cox <alan@redhat.com>
>
> Various tags are now way out of date
>
> Signed-off-by: Alan Cox <alan@redhat.com>
>
> ---
>
> drivers/ata/Kconfig | 32 ++++++++++++++++----------------
> 1 files changed, 16 insertions(+), 16 deletions(-)
>
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 78fbec8..4095a2c 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -219,8 +219,8 @@ config PATA_ACPI
> otherwise unsupported hardware.
>
> config PATA_ALI
> - tristate "ALi PATA support (Experimental)"
> - depends on PCI && EXPERIMENTAL
> + tristate "ALi PATA support"
> + depends on PCI
> help
> This option enables support for the ALi ATA interfaces
> found on the many ALi chipsets.
> @@ -263,7 +263,7 @@ config PATA_ATIIXP
> If unsure, say N.
>
> config PATA_CMD640_PCI
> - tristate "CMD640 PCI PATA support (Very Experimental)"
> + tristate "CMD640 PCI PATA support (Experimental)"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the CMD640 PCI IDE
> @@ -291,8 +291,8 @@ config PATA_CS5520
> If unsure, say N.
>
> config PATA_CS5530
> - tristate "CS5530 PATA support (Experimental)"
> - depends on PCI && EXPERIMENTAL
> + tristate "CS5530 PATA support"
> + depends on PCI
> help
> This option enables support for the Cyrix/NatSemi/AMD CS5530
> companion chip used with the MediaGX/Geode processor family.
> @@ -309,8 +309,8 @@ config PATA_CS5535
> If unsure, say N.
>
> config PATA_CS5536
> - tristate "CS5536 PATA support (Experimental)"
> - depends on PCI && X86 && !X86_64 && EXPERIMENTAL
> + tristate "CS5536 PATA support"
> + depends on PCI && X86 && !X86_64
> help
> This option enables support for the AMD CS5536
> companion chip used with the Geode LX processor family.
> @@ -363,7 +363,7 @@ config PATA_HPT37X
> If unsure, say N.
>
> config PATA_HPT3X2N
> - tristate "HPT 372N/302N PATA support (Very Experimental)"
> + tristate "HPT 372N/302N PATA support (Experimental)"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the N variant HPT PATA
> @@ -389,7 +389,7 @@ config PATA_HPT3X3_DMA
> problems with DMA on this chipset.
>
> config PATA_ISAPNP
> - tristate "ISA Plug and Play PATA support (Experimental)"
> + tristate "ISA Plug and Play PATA support"
> depends on EXPERIMENTAL && ISAPNP
> help
> This option enables support for ISA plug & play ATA
> @@ -498,8 +498,8 @@ config PATA_NINJA32
> If unsure, say N.
>
> config PATA_NS87410
> - tristate "Nat Semi NS87410 PATA support (Experimental)"
> - depends on PCI && EXPERIMENTAL
> + tristate "Nat Semi NS87410 PATA support"
> + depends on PCI
> help
> This option enables support for the National Semiconductor
> NS87410 PCI-IDE controller.
> @@ -507,7 +507,7 @@ config PATA_NS87410
> If unsure, say N.
>
> config PATA_NS87415
> - tristate "Nat Semi NS87415 PATA support (Experimental)"
> + tristate "Nat Semi NS87415 PATA support"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the National Semiconductor
> @@ -544,7 +544,7 @@ config PATA_PCMCIA
> If unsure, say N.
>
> config PATA_PDC_OLD
> - tristate "Older Promise PATA controller support (Experimental)"
> + tristate "Older Promise PATA controller support"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the Promise 20246, 20262, 20263,
> @@ -559,7 +559,7 @@ config PATA_QDI
> Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
>
> config PATA_RADISYS
> - tristate "RADISYS 82600 PATA support (Very Experimental)"
> + tristate "RADISYS 82600 PATA support (Experimental)"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the RADISYS 82600
> @@ -586,7 +586,7 @@ config PATA_RZ1000
> If unsure, say N.
>
> config PATA_SC1200
> - tristate "SC1200 PATA support (Very Experimental)"
> + tristate "SC1200 PATA support"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the NatSemi/AMD SC1200 SoC
> @@ -620,7 +620,7 @@ config PATA_SIL680
> If unsure, say N.
>
> config PATA_SIS
> - tristate "SiS PATA support (Experimental)"
> + tristate "SiS PATA support"
> depends on PCI && EXPERIMENTAL
> help
As Sergei noted, please remove the CONFIG_EXPERIMENTAL dependencies at
the same time.
Jeff
prev parent reply other threads:[~2008-10-23 0:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-21 12:45 [PATCH] ata: Fix experimental tags Alan Cox
2008-10-21 14:30 ` Sergei Shtylyov
2008-10-21 14:32 ` Jeff Garzik
2008-10-23 0:37 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48FFC765.7010905@garzik.org \
--to=jeff@garzik.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.