Re: [PATCH 1/5] dt-bindings: dsp: fix power domain count

[Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>]

On 9/18/2024 9:49 PM, Frank Li wrote:
> On Wed, Sep 18, 2024 at 02:21:13PM -0400, Laurentiu Mihalcea wrote:
>> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>>
>> Per the current binding, QM/QXP DSPs are supposed
>> to have 4 power domains, while the rest just 1.
>> For QM/QXP, the 4 power domains are: DSP, DSP_RAM,
>> MU13A, MU13B.
>>
>> First off, drop MU13A from the count. This is attached
>> to the platform device of lsio_mu13. This decreases the
>> count to 3.
>>
>> Secondly, drop DSP and DSP_RAM from the count for QXP.
>> These are attached to the platform devices of the lpcgs
>> (used as clock providers for the DSP).
>>
>> With this in mind, the number of required power domains for
>> QXP is 1 (MU13B), while for QM it's 3 (MU13B, DSP, DSP_RAM).
>>
>> Additionally, two extra power domains may be required in the
>> case of QM/QXP DSPs. These are IRQSTR_DSP and MU2A. For the nodes
>> using the "-hifi4" compatibles these PDs are optional, while for
>> nodes using the "-dsp" compatibles these are mandatory.
>>
>> These changes reflect all of this information.
> Can you wrap message to 75 char?
Shall fix in V2.
>
>> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>> ---
>>  .../devicetree/bindings/dsp/fsl,dsp.yaml      | 62 +++++++++++++++----
>>  1 file changed, 49 insertions(+), 13 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
>> index 9af40da5688e..e2f016af1048 100644
>> --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
>> +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
>> @@ -51,8 +51,6 @@ properties:
>>      description:
>>        List of phandle and PM domain specifier as documented in
>>        Documentation/devicetree/bindings/power/power_domain.txt
>> -    minItems: 1
>> -    maxItems: 4
>>
>>    mboxes:
>>      description:
>> @@ -97,16 +95,55 @@ allOf:
>>        properties:
>>          compatible:
>>            contains:
>> -            enum:
>> -              - fsl,imx8qxp-dsp
>> -              - fsl,imx8qm-dsp
>> -              - fsl,imx8qxp-hifi4
>> -              - fsl,imx8qm-hifi4
>> +            const: fsl,imx8qxp-hifi4
>>      then:
>>        properties:
>>          power-domains:
>> -          minItems: 4
>> -    else:
>> +          maxItems: 3
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: fsl,imx8qxp-dsp
>> +    then:
>> +      properties:
>> +        power-domains:
>> +          minItems: 3
>> +          maxItems: 3
> I remember only need maxItems, if minItems == maxItems.
Might be off here but from my own testing and from looking at dtschema/fixups.py it would seem that's not really applicable to subschemas under "then"/"else" blocks.
>
> Frank
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: fsl,imx8qm-dsp
>> +    then:
>> +      properties:
>> +        power-domains:
>> +          minItems: 5
>> +          maxItems: 5
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: fsl,imx8qm-hifi4
>> +    then:
>> +      properties:
>> +        power-domains:
>> +          minItems: 3
>> +          maxItems: 5
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - fsl,imx8mp-dsp
>> +              - fsl,imx8mp-hifi4
>> +              - fsl,imx8ulp-dsp
>> +              - fsl,imx8ulp-hifi4
>> +    then:
>>        properties:
>>          power-domains:
>>            maxItems: 1
>> @@ -157,10 +194,9 @@ examples:
>>                   <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
>>                   <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
>>          clock-names = "ipg", "ocram", "core";
>> -        power-domains = <&pd IMX_SC_R_MU_13A>,
>> -                        <&pd IMX_SC_R_MU_13B>,
>> -                        <&pd IMX_SC_R_DSP>,
>> -                        <&pd IMX_SC_R_DSP_RAM>;
>> +        power-domains = <&pd IMX_SC_R_MU_13B>,
>> +                        <&pd IMX_SC_R_IRQSTR_DSP>,
>> +                        <&pd IMX_SC_R_MU_2A>;
>>          mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
>>          mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
>>          memory-region = <&dsp_reserved>;
>> --
>> 2.34.1
>>