From: Nathan Fontenot <nfont@austin.ibm.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH] Allocate resources for PHB DLPAR add
Date: Thu, 23 Oct 2008 23:08:33 -0500 [thread overview]
Message-ID: <49014A41.6040700@austin.ibm.com> (raw)
Resources for PHB's that are DLPAR added to a system are not acquired.
Not having these resources allocated causes an oops during DLPAR
remove of the PHB when we try to release non-existant resources.
The patch appears a bit messy, this is mainly due to moving everything
one tab to the left in the pcibios_allocate_bus_resources routine. The
big functionality change in this routine is only that the
list_for_each_entry() loop is pulled out and moved to the necessary
calling routine.
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
---
Index: linux-2.6/arch/powerpc/kernel/pci-common.c
===================================================================
--- linux-2.6.orig/arch/powerpc/kernel/pci-common.c 2008-10-21 21:26:18.000000000 -0500
+++ linux-2.6/arch/powerpc/kernel/pci-common.c 2008-10-21 22:16:54.000000000 -0500
@@ -986,69 +986,66 @@
* as well.
*/
-static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+void pcibios_allocate_bus_resources(struct pci_bus *bus)
{
- struct pci_bus *bus;
+ struct pci_bus *b;
int i;
struct resource *res, *pr;
- /* Depth-First Search on bus tree */
- list_for_each_entry(bus, bus_list, node) {
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
- if ((res = bus->resource[i]) == NULL || !res->flags
- || res->start > res->end)
- continue;
- if (bus->parent == NULL)
- pr = (res->flags & IORESOURCE_IO) ?
- &ioport_resource : &iomem_resource;
- else {
- /* Don't bother with non-root busses when
- * re-assigning all resources. We clear the
- * resource flags as if they were colliding
- * and as such ensure proper re-allocation
- * later.
+ for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+ if ((res = bus->resource[i]) == NULL || !res->flags
+ || res->start > res->end)
+ continue;
+ if (bus->parent == NULL)
+ pr = (res->flags & IORESOURCE_IO) ?
+ &ioport_resource : &iomem_resource;
+ else {
+ /* Don't bother with non-root busses when
+ * re-assigning all resources. We clear the
+ * resource flags as if they were colliding
+ * and as such ensure proper re-allocation
+ * later.
+ */
+ if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)
+ goto clear_resource;
+ pr = pci_find_parent_resource(bus->self, res);
+ if (pr == res) {
+ /* this happens when the generic PCI
+ * code (wrongly) decides that this
+ * bridge is transparent -- paulus
*/
- if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)
- goto clear_resource;
- pr = pci_find_parent_resource(bus->self, res);
- if (pr == res) {
- /* this happens when the generic PCI
- * code (wrongly) decides that this
- * bridge is transparent -- paulus
- */
- continue;
- }
+ continue;
}
+ }
- DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
- "[0x%x], parent %p (%s)\n",
- bus->self ? pci_name(bus->self) : "PHB",
- bus->number, i,
- (unsigned long long)res->start,
- (unsigned long long)res->end,
- (unsigned int)res->flags,
- pr, (pr && pr->name) ? pr->name : "nil");
-
- if (pr && !(pr->flags & IORESOURCE_UNSET)) {
- if (request_resource(pr, res) == 0)
- continue;
- /*
- * Must be a conflict with an existing entry.
- * Move that entry (or entries) under the
- * bridge resource and try again.
- */
- if (reparent_resources(pr, res) == 0)
- continue;
- }
- printk(KERN_WARNING
- "PCI: Cannot allocate resource region "
- "%d of PCI bridge %d, will remap\n",
- i, bus->number);
-clear_resource:
- res->flags = 0;
+ DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
+ "[0x%x], parent %p (%s)\n",
+ bus->self ? pci_name(bus->self) : "PHB",
+ bus->number, i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned int)res->flags,
+ pr, (pr && pr->name) ? pr->name : "nil");
+
+ if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+ if (request_resource(pr, res) == 0)
+ continue;
+ /*
+ * Must be a conflict with an existing entry.
+ * Move that entry (or entries) under the
+ * bridge resource and try again.
+ */
+ if (reparent_resources(pr, res) == 0)
+ continue;
}
- pcibios_allocate_bus_resources(&bus->children);
+ printk(KERN_WARNING "PCI: Cannot allocate resource region "
+ "%d of PCI bridge %d, will remap\n", i, bus->number);
+clear_resource:
+ res->flags = 0;
}
+
+ list_for_each_entry(b, &bus->children, node)
+ pcibios_allocate_bus_resources(b);
}
static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
@@ -1119,10 +1116,13 @@
void __init pcibios_resource_survey(void)
{
+ struct pci_bus *b;
+
/* Allocate and assign resources. If we re-assign everything, then
* we skip the allocate phase
*/
- pcibios_allocate_bus_resources(&pci_root_buses);
+ list_for_each_entry(b, &pci_root_buses, node)
+ pcibios_allocate_bus_resources(b);
if (!(ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)) {
pcibios_allocate_resources(0);
Index: linux-2.6/arch/powerpc/include/asm/pci.h
===================================================================
--- linux-2.6.orig/arch/powerpc/include/asm/pci.h 2008-10-21 21:26:18.000000000 -0500
+++ linux-2.6/arch/powerpc/include/asm/pci.h 2008-10-21 22:15:03.000000000 -0500
@@ -196,6 +196,8 @@
extern void pcibios_claim_one_bus(struct pci_bus *b);
+extern void pcibios_allocate_bus_resources(struct pci_bus *bus);
+
extern void pcibios_resource_survey(void);
extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
Index: linux-2.6/arch/powerpc/platforms/pseries/pci_dlpar.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/pseries/pci_dlpar.c 2008-10-21 21:26:18.000000000 -0500
+++ linux-2.6/arch/powerpc/platforms/pseries/pci_dlpar.c 2008-10-21 22:16:37.000000000 -0500
@@ -189,6 +189,7 @@
{
struct pci_controller *phb;
int primary;
+ struct pci_bus *b;
primary = list_empty(&hose_list);
phb = pcibios_alloc_controller(dn);
@@ -203,6 +204,7 @@
eeh_add_device_tree_early(dn);
scan_phb(phb);
+ pcibios_allocate_bus_resources(phb->bus);
pcibios_fixup_new_pci_devices(phb->bus);
pci_bus_add_devices(phb->bus);
eeh_add_device_tree_late(phb->bus);
next reply other threads:[~2008-10-24 4:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-24 4:08 Nathan Fontenot [this message]
2008-10-24 7:51 ` [PATCH] Allocate resources for PHB DLPAR add Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49014A41.6040700@austin.ibm.com \
--to=nfont@austin.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.