From: Stefan Bauer <stefan.bauer@cubewerk.de>
Cc: xen-devel@lists.xensource.com
Subject: Re: [VT-D]iommu.c:775: iommu_page_fault: iommu->reg =ffff828bfff57000
Date: Tue, 28 Oct 2008 20:41:59 +0100 [thread overview]
Message-ID: <49076B07.2010100@cubewerk.de> (raw)
In-Reply-To: <409D32C55C48D34DB5E31C8AB29EB15B071C6AF6@FTLPEXCH05.citrite.net>
[-- Attachment #1: Type: text/plain, Size: 1893 bytes --]
Ross Philipson schrieb:
> So the trace below is showing a failure during Xen boot and later you
> have trouble passing through a graphics card to an HVM? Do you get
> subsequent errors when starting the HVM? What is device 00:2.0 that is
> causing the fault below? Reason 5 indicates a DMA write to a page where
> the IOMMU PTE W bit is clear to disallow DMA writes.
Hi Ross,
the error after trying to start the hvm guest by xm create win2k is:
VmError: fail to assign device(1:0.0): maybe it has already been
assigned to other domain, or maybe it doesn't exist.
[2008-10-25 19:59:30 2460] DEBUG (__init__:1072)
XendDomainInfo.destroy: domid=5
[2008-10-25 19:59:30 2460] DEBUG (__init__:1072)
XendDomainInfo.destroyDomain(5)
[2008-10-25 19:59:30 2460] DEBUG (__init__:1072) No device model
[2008-10-25 19:59:30 2460] DEBUG (__init__:1072) Releasing devices
[2008-10-25 19:59:30 2460] ERROR (__init__:1072) Domain construction
failed
Traceback (most recent call last):
File "//usr/lib64/python/xen/xend/XendDomainInfo.py", line 92, in create
vm.start()
File "//usr/lib64/python/xen/xend/XendDomainInfo.py", line 424, in start
XendTask.log_progress(0, 30, self._constructDomain)
File "//usr/lib64/python/xen/xend/XendTask.py", line 209, in
log_progress
retval = func(*args, **kwds)
File "//usr/lib64/python/xen/xend/XendDomainInfo.py", line 2103, in
_constructDomain
raise VmError("fail to assign device(%x:%x.%x): maybe it has"
VmError: fail to assign device(1:0.0): maybe it has already been
assigned to other domain, or maybe it doesn't exist.
I also noticed that lspci did not show the graphiccard anymore after i
use the boot option iommu in combination with vtd. Might be caused by
that initial error.
I have to admit that lspci did not show device 00:2.0. that looks
strange to me.
please see attached the output of lspci -vv
Thanks in advance
--
stefan
[-- Attachment #2: lspci --]
[-- Type: text/plain, Size: 15835 bytes --]
00:00.0 Host bridge: Intel Corporation Unknown device 29b0 (rev 02)
Subsystem: Lenovo Unknown device 3037
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation Unknown device 29b1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] Subsystem: Lenovo Unknown device 3037
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 4096, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:03.0 Communication controller: Intel Corporation Unknown device 29b4 (rev 02)
Subsystem: Lenovo Unknown device 3037
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d3326000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface: Intel Corporation Unknown device 29b6 (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Lenovo Unknown device 3037
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 1c80 [disabled] [size=8]
Region 1: I/O ports at 1c74 [disabled] [size=4]
Region 2: I/O ports at 1c78 [disabled] [size=8]
Region 3: I/O ports at 1c70 [disabled] [size=4]
Region 4: I/O ports at 1c20 [disabled] [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller: Intel Corporation Unknown device 29b7 (rev 02) (prog-if 02 [16550])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c88 [size=8]
Region 1: Memory at d3324000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller: Intel Corporation Unknown device 10bd (rev 02)
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d3300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d3325000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] #13 [0306]
00:1a.0 USB Controller: Intel Corporation Unknown device 2937 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1840 [size=32]
Capabilities: [50] #13 [0306]
00:1a.1 USB Controller: Intel Corporation Unknown device 2938 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1860 [size=32]
Capabilities: [50] #13 [0306]
00:1a.2 USB Controller: Intel Corporation Unknown device 2939 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1880 [size=32]
Capabilities: [50] #13 [0306]
00:1a.7 USB Controller: Intel Corporation Unknown device 293c (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo Unknown device 3037
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d3326800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
Capabilities: [98] #13 [0306]
00:1b.0 Audio device: Intel Corporation Unknown device 293e (rev 02)
Subsystem: Lenovo Unknown device 3037
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d3320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00:1d.0 USB Controller: Intel Corporation Unknown device 2934 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18a0 [size=32]
Capabilities: [50] #13 [0306]
00:1d.1 USB Controller: Intel Corporation Unknown device 2935 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18c0 [size=32]
Capabilities: [50] #13 [0306]
00:1d.2 USB Controller: Intel Corporation Unknown device 2936 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18e0 [size=32]
Capabilities: [50] #13 [0306]
00:1d.7 USB Controller: Intel Corporation Unknown device 293a (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo Unknown device 3037
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d3326c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
Capabilities: [98] #13 [0306]
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=11, subordinate=11, sec-latency=32
Memory behind bridge: d3000000-d30fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Subsystem: Lenovo Unknown device 3037
00:1f.0 ISA bridge: Intel Corporation Unknown device 2914 (rev 02)
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation Unknown device 2920 (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1c40 [size=16]
Region 5: I/O ports at 1c30 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] #13 [0306]
00:1f.3 SMBus: Intel Corporation Unknown device 2930 (rev 02)
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d3327000 (64-bit, non-prefetchable) [disabled] [size=256]
Region 4: I/O ports at 1c00 [size=32]
00:1f.5 IDE interface: Intel Corporation Unknown device 2926 (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Lenovo Unknown device 3037
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 1cb8 [size=8]
Region 1: I/O ports at 1cac [size=4]
Region 2: I/O ports at 1cb0 [size=8]
Region 3: I/O ports at 1ca8 [size=4]
Region 4: I/O ports at 1c60 [size=16]
Region 5: I/O ports at 1c50 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] #13 [0306]
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 8243
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <512ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
11:0c.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
Subsystem: Atheros Communications, Inc. Unknown device 2052
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d3000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2008-10-28 19:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-28 10:09 [VT-D]iommu.c:775: iommu_page_fault: iommu->reg = ffff828bfff57000 Stefan Bauer
[not found] ` <80769D7B14936844A23C0C43D9FBCF0F21182262@orsmsx501.amr.corp.intel.com>
2008-10-28 17:49 ` ]iommu.c:775: " Stefan Bauer
2008-10-28 19:22 ` [VT-D]iommu.c:775: iommu_page_fault: iommu->reg =ffff828bfff57000 Ross Philipson
2008-10-28 19:41 ` Stefan Bauer [this message]
[not found] ` <409D32C55C48D34DB5E31C8AB29EB15B071C6B27@FTLPEXCH05.citrite.net>
2008-10-28 20:21 ` [VT-D]iommu.c:775: iommu_page_fault: iommu->reg=ffff828bfff57000 Stefan Bauer
2008-10-28 22:06 ` Stefan Bauer
2008-10-29 13:26 ` [VT-D]iommu.c:775: iommu_page_fault:iommu->reg=ffff828bfff57000 Ross Philipson
2008-10-29 13:37 ` Stefan Bauer
[not found] ` <409D32C55C48D34DB5E31C8AB29EB15B071C6C9C@FTLPEXCH05.citrite.net>
2008-10-29 14:07 ` [VT-D]iommu.c:775:iommu_page_fault:iommu->reg=ffff828bfff57000 Stefan Bauer
2008-10-29 16:58 ` [VT-D]iommu.c:775: iommu_page_fault: iommu->reg = ffff828bfff57000 [SOLVED] Stefan Bauer
2008-10-29 19:24 ` Kay, Allen M
2008-10-29 19:35 ` Stefan Bauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49076B07.2010100@cubewerk.de \
--to=stefan.bauer@cubewerk.de \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.