From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Mahlknecht Date: Fri, 31 Oct 2008 22:20:58 +0000 Subject: Re: [lm-sensors] [Em28xx] ACPI reads wrong temperature after Message-Id: <490B84CA.1080208@gmx.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Markus Rechberger schrieb: > Hi Peter, > > On Fri, Oct 31, 2008 at 11:08 PM, Peter Mahlknecht wrot= e: > =20 >> Hi, >> I have here a strange problem: >> after loading the em28xx_cx25843 module in >> /proc/acpi/thermal_zone/THRM/temperature a wrong temperature (65535 C) w= hich >> forces a shutdown on my notebook ("Critical temperature reached (65535 C= ). >> Shutting down."). Same thing happens if I load the lm90 module (hwmon dr= iver >> for the temperaturesensor used by lm-sensors). Both modules depend on >> i2c_core, so maybe its an I=B2C bug. Any suggestions? >> >> =20 > > I think the lmsensors mailinglist might be better for this! Jean > Delvare might now more about it. > added the lm-sensors ML. > > also provide which kernel version you use. > > Markus > > =20 Thanks for the fast reply, I am using Debian Lenny (2.6.26-1-686) on my notebook (Samsung P40 with=20 the latest Bios 09HK), but had the same problem also with the=20 2.6.18-6-686 (Lenny) and with Ubuntu Hardy Heron (think the kernel was=20 2.6.24). Peter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors