All of lore.kernel.org
 help / color / mirror / Atom feed
From: Constantine Gavrilov <constantine.gavrilov@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: general@lists.openfabrics.org
Subject: Re: patch: support long (above 14 bytes) HW addresses in arp_ioctl
Date: Mon, 03 Nov 2008 18:34:36 +0200	[thread overview]
Message-ID: <490F281C.60800@gmail.com> (raw)
In-Reply-To: <490EDBDD.1030104@gmail.com>


[-- Attachment #1.1: Type: text/plain, Size: 2091 bytes --]

Updated version of the patch uses MAX_ADDR_LEN from netdevice.h as the 
maximal length of MAC address.

Constantine Gavrilov wrote:
> While working with OFED infiniband stack that uses 20 byte long HW 
> addresses for IP over IB, I have paid attention to the following  
> arp_ioctl problem.
>
> The ioctl uses a data structure that limits a length of HW address to 
> 14 bytes. The IP stack and the arp cache code do not have that 
> limitation. This leads to the following problems:
>
> * arp_ioctl cannot be used to set, get, or delete arp entries for 
> those adapters that have HW addresses longer than 14 bytes
> * arp_ioctl will corrupt the kernel and user memory when this ioctl is 
> used on the adapters that have HW addresses longer that 14 bytes.  
> This is because when copying the HW address, the arp_ioctl code copies 
> dev->addr_len bytes without checking that addr_len is not above 14 
> bytes. This is done both for copy_to_user() and memcpy() calls on 
> kernel data structures allocated on stack. The memcpy() call in 
> particular, will corrupt kernel stack.
>
> Attached please find the patch that fixes both problems. In addition, 
> the patch changes the maximal number of bytes for HW address that will 
> be seen in /proc/net/arp from ~10 to ~30. Without the last change, 
> output of /proc/net/arp truncates the the large MAC entries, which 
> makes the arp utility useless.
>
> The patch does not change the existing ABI but extends it.  The kernel 
> structure used in arp_ioctl calls is changed to support larger 
> addresses, while the user-space structure is extended by appending 
> extra-space to the end of the structure if ATF_NEWARPCTL -- a new 
> flag  -- is set in arp_flags of existing user-space structure. This 
> allows avoiding big changes to the existing code while preserving the 
> ABI compatibility.
>

-- 
----------------------------------------
Constantine Gavrilov
Kernel Developer
Platform Group
XIV, an IBM global brand 
1 Azrieli Center, Tel-Aviv
Phone: +972-3-6074672
Fax:   +972-3-6959749
----------------------------------------



[-- Attachment #1.2: arp_ioctl.patch --]
[-- Type: text/x-patch, Size: 5246 bytes --]

--- include/linux/if_arp.h.orig	2008-10-10 00:13:53.000000000 +0200
+++ include/linux/if_arp.h	2008-11-03 18:29:14.000000000 +0200
@@ -99,14 +99,27 @@
 #define	ARPOP_InREPLY	9		/* InARP reply			*/
 #define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
 
+struct hwaddr {
+  sa_family_t	sa_family;		/* address family, AF_xxx       */
+  char		sa_data[MAX_ADDR_LEN];	/* 32 bytes of HW address	*/
+};
 
 /* ARP ioctl request. */
 struct arpreq {
   struct sockaddr	arp_pa;		/* protocol address		*/
+  struct hwaddr		arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+  char			arp_dev[16];
+};
+
+struct arpreq_user {
+  struct sockaddr	arp_pa;		/* protocol address		*/
   struct sockaddr	arp_ha;		/* hardware address		*/
   int			arp_flags;	/* flags			*/
   struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
   char			arp_dev[16];
+  char			arp_ha_ext[MAX_ADDR_LEN-14]; /* extended part of HW address */
 };
 
 struct arpreq_old {
@@ -124,6 +137,10 @@
 #define ATF_NETMASK     0x20            /* want to use a netmask (only
 					   for proxy entries) */
 #define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
+#define ATF_NEWARPCTL	0x80		/* use larger buff for hw address */
+
+#define NOT_VALID_ARP_CTL(__dev, __r) ((__dev->addr_len > sizeof(((struct arpreq_user *)__r)->arp_ha.sa_data)) && \
+	((__dev->addr_len > sizeof(__r->arp_ha.sa_data)) || !(__r->arp_flags & ATF_NEWARPCTL)))
 
 /*
  *	This structure defines an ethernet arp header.
--- net/ipv4/arp.c.orig	2008-10-10 00:13:53.000000000 +0200
+++ net/ipv4/arp.c	2008-11-02 16:59:34.000000000 +0200
@@ -968,7 +968,12 @@
 	if (!dev && (r->arp_flags & ATF_COM)) {
 		dev = dev_getbyhwaddr(net, r->arp_ha.sa_family,
 				r->arp_ha.sa_data);
-		if (!dev)
+		if (!dev || NOT_VALID_ARP_CTL(dev, r)) /* 
+							 if we managed to find an interface that should have 
+							 larger buffer for HW MAC than one that was supposedly supplied, 
+							 it is not our interface -- the NIC was matched by "junk"
+							 extended data in r and not by  user supplied address
+							*/
 			return -ENODEV;
 	}
 	if (mask) {
@@ -1004,6 +1009,9 @@
 		if (!dev)
 			return -EINVAL;
 	}
+	if(NOT_VALID_ARP_CTL(dev, r)) 
+		return -EINVAL; /* the user gave too short HW address */
+
 	switch (dev->type) {
 #ifdef CONFIG_FDDI
 	case ARPHRD_FDDI:
@@ -1127,11 +1135,23 @@
  *	Handle an ARP layer I/O control request.
  */
 
+#define swap_arp_ioctl_structs(__in, __out) \
+do {\
+	__out.arp_pa = __in.arp_pa; \
+	__out.arp_ha.sa_family = __in.arp_ha.sa_family; \
+	memcpy(&__out.arp_ha.sa_data[0], &__in.arp_ha.sa_data[0], sizeof(__in.arp_ha.sa_data)); \
+	__out.arp_flags = __in.arp_flags; \
+	__out.arp_netmask = __in.arp_netmask; \
+	memcpy(&__out.arp_dev[0], &__in.arp_dev[0], sizeof(__in.arp_dev)); \
+} while(0)
+ 
 int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
 {
 	int err;
 	struct arpreq r;
+	struct arpreq_user user_r;
 	struct net_device *dev = NULL;
+	int is_newarpctl = 0;
 
 	switch (cmd) {
 		case SIOCDARP:
@@ -1139,9 +1159,16 @@
 			if (!capable(CAP_NET_ADMIN))
 				return -EPERM;
 		case SIOCGARP:
-			err = copy_from_user(&r, arg, sizeof(struct arpreq));
+			err = copy_from_user(&user_r, arg, offsetof(struct arpreq_user,  arp_ha_ext));
 			if (err)
 				return -EFAULT;
+			swap_arp_ioctl_structs(user_r, r);
+			if(user_r.arp_flags & ATF_NEWARPCTL) {
+				is_newarpctl = 1;
+				err =  copy_from_user(&r.arp_ha.sa_data[0] + sizeof(user_r.arp_ha.sa_data), (char *)arg + offsetof(struct arpreq_user,  arp_ha_ext), sizeof(user_r.arp_ha_ext));
+				if (err)
+					return -EFAULT;
+			}
 			break;
 		default:
 			return -EINVAL;
@@ -1175,15 +1202,35 @@
 
 	switch (cmd) {
 	case SIOCDARP:
+		/* Delete arp does not use the value of HW address, we do not have to check whether the supplied buffer is large enough */
 		err = arp_req_delete(net, &r, dev);
 		break;
 	case SIOCSARP:
+ 		/* Our HW addr buffer may be not large enough */
+ 		/* Check the case when the interface was found by a given name and let arp_req_set to check for other cases */
+ 		if(dev && NOT_VALID_ARP_CTL(dev, (&r))) {
+ 			err = -EINVAL; /* the user gave truncated HW address */
+ 			goto out;
+ 		}
 		err = arp_req_set(net, &r, dev);
 		break;
 	case SIOCGARP:
-		err = arp_req_get(&r, dev);
-		if (!err && copy_to_user(arg, &r, sizeof(r)))
-			err = -EFAULT;
+		if(NOT_VALID_ARP_CTL(dev, (&r))) {
+			err = -EINVAL; /* the user has not given enough place to store HW address */
+			goto out;
+		}
+		memset(&r.arp_ha.sa_data[0], 0, sizeof(r.arp_ha.sa_data));
+  		err = arp_req_get(&r, dev);
+		if (!err) {
+			swap_arp_ioctl_structs(r, user_r);
+			if(is_newarpctl) {
+				memcpy(&user_r.arp_ha_ext[0], &r.arp_ha.sa_data[0]+sizeof(user_r.arp_ha.sa_data),  sizeof(user_r.arp_ha_ext));
+				err = copy_to_user(arg, &user_r, sizeof(user_r));
+			} else
+				err = copy_to_user(arg, &user_r, offsetof(struct arpreq_user,  arp_ha_ext));
+			if (err)
+				err = -EFAULT;
+		}
 		break;
 	}
 out:
@@ -1281,7 +1328,7 @@
 }
 #endif /* CONFIG_AX25 */
 
-#define HBUFFERLEN 30
+#define HBUFFERLEN 96
 
 static void arp_format_neigh_entry(struct seq_file *seq,
 				   struct neighbour *n)

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 5355 bytes --]

  reply	other threads:[~2008-11-03 16:36 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-03 11:09 patch: support long (above 14 bytes) HW addresses in arp_ioctl Constantine Gavrilov
2008-11-03 16:34 ` Constantine Gavrilov [this message]
2008-11-03 17:39 ` Roland Dreier
2008-11-03 18:56   ` Constantine Gavrilov
2008-11-03 21:58     ` Stephen Hemminger
2008-11-03 23:53     ` Roland Dreier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=490F281C.60800@gmail.com \
    --to=constantine.gavrilov@gmail.com \
    --cc=general@lists.openfabrics.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.