All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ruediger Dohmhardt <ruediger.dohmhardt@freenet.de>
To: Tomas Drajsajtl <linux-dvb@drajsajtl.cz>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] TT DVB-C 2300 and CAM, Was: Any DVB-C tuner with working CAM?
Date: Mon, 03 Nov 2008 22:54:50 +0100	[thread overview]
Message-ID: <490F732A.8060505@freenet.de> (raw)
In-Reply-To: <001201c93d80$a9df4620$7f79a8c0@tommy>

[-- Attachment #1: Type: text/plain, Size: 230 bytes --]

Dear Tomas

Attached you find part of my
/var/log/boot.msg

and

/var/log/messages

One hint: When switching from vdr 1.4.x to 1.5/1.6/1.7  the channel.conf
must be adapted with respect to decrypted channels.

Ciao Ruediger D.




[-- Attachment #2: dvb-ttpci.txt --]
[-- Type: text/plain, Size: 6037 bytes --]

/*
* /var/log/boot.msg
*/

<4>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
<6>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
<4>saa7146: found saa7146 @ mem f887e000 (revision 1, irq 18) (0x13c2,0x000a).
<7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c015112f7d8]
<6>DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
<7>ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00046100000905df]
<4>adapter has MAC addr = 00:d0:5c:04:45:e6
<4>dvb-ttpci: gpioirq unknown type=0 len=0
<4>dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
<4>dvb-ttpci: firmware @ card 0 supports CI link layer interface
<4>dvb-ttpci: DVB-C analog module @ card 0 detected, initializing MSP3415
<4>dvb_ttpci: saa7113 not accessible.
<4>saa7146_vv: saa7146 (0): registered device video0 [v4l2]
<4>saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
<4>DVB: registering frontend 0 (ST STV0297 DVB-C)...
<6>input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input5
<6>dvb-ttpci: found av7110-0.
<6>Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
<6>loop: module loaded



/*
* /var/log/messages
*/

Nov  3 22:45:02 linux-nszr vdr: [1245] VDR version 1.4.2-2 started
Nov  3 22:45:02 linux-nszr vdr: [1245] loading /video/setup.conf
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: AntiAlias = 1
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: ChannelEntryTimeout = 1000
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: DisplaySubtitles = 0
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: EmergencyExit = 1
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontFix = Courier:Bold
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontFixSize = 20
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontOsd = Sans Serif:Bold
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontOsdSize = 22
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontSml = Sans Serif
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontSmlSize = 18
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: MenuKeyCloses = 0
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: NextWakeupTime = 0
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: SortTimers = 1
Nov  3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleBgTransparency = 0
Nov  3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleFgTransparency = 0
Nov  3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleLanguages = 
Nov  3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleOffset = 0
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/sources.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/diseqc.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/channels.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/timers.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/commands.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/svdrphosts.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/remote.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/keymacros.conf
Nov  3 22:45:03 linux-nszr vdr: [1246] video directory scanner thread started (pid=1245, tid=1246)
Nov  3 22:45:03 linux-nszr vdr: [1246] video directory scanner thread ended (pid=1245, tid=1246)
Nov  3 22:45:03 linux-nszr vdr: [1247] video directory scanner thread started (pid=1245, tid=1247)
Nov  3 22:45:03 linux-nszr vdr: [1247] video directory scanner thread ended (pid=1245, tid=1247)
Nov  3 22:45:03 linux-nszr vdr: [1245] reading EPG data from /video/epg.data
Nov  3 22:45:03 linux-nszr vdr: [1245] probing /dev/dvb/adapter0/frontend0
Nov  3 22:45:05 linux-nszr vdr: [1249] tuner on device 1 thread started (pid=1245, tid=1249)
Nov  3 22:45:05 linux-nszr vdr: [1250] section handler thread started (pid=1245, tid=1250)
Nov  3 22:45:05 linux-nszr vdr: [1245] found 1 video device
Nov  3 22:45:05 linux-nszr vdr: [1245] setting primary device to 1
Nov  3 22:45:05 linux-nszr vdr: [1245] SVDRP listening on port 2001
Nov  3 22:45:05 linux-nszr vdr: [1245] setting current skin to "sttng"
Nov  3 22:45:05 linux-nszr vdr: [1245] loading /video/themes/sttng-default.theme
Nov  3 22:45:05 linux-nszr vdr: [1245] ERROR: /dev/lircd: No such file or directory
Nov  3 22:45:05 linux-nszr vdr: [1251] KBD remote control thread started (pid=1245, tid=1251)
Nov  3 22:45:05 linux-nszr vdr: [1245] ERROR: remote control LIRC not ready!
Nov  3 22:45:05 linux-nszr vdr: [1245] remote control KBD - keys known
Nov  3 22:45:07 linux-nszr vdr: [1245] CAM: AlphaCrypt Light, 01, 4A20, 4A20
Nov  3 22:45:08 linux-nszr vdr: [1245] switching to channel 1
Nov  3 22:45:11 linux-nszr vdr: [1250] changing name of channel 24 from 'Bayerisches FS Süd,;ARD' to 'Bayerisches FS S#,;ARD'
Nov  3 22:45:11 linux-nszr vdr: [1250] changing name of channel 26 from 'WDR Köln,;ARD' to 'WDR K#n,;ARD'
Nov  3 22:45:13 linux-nszr vdr: [1245] switching to channel 34
Nov  3 22:45:16 linux-nszr vdr: [1250] creating new channel 'OraiaTV (engl),;Digital Free' on C transponder 330 with id 61441-10008-53119-0
Nov  3 22:45:16 linux-nszr vdr: [1250] changing name of channel 642 from 'Bayern Mobil,;ARD' to 'BAYERN plus,;ARD'
Nov  3 22:45:16 linux-nszr vdr: [1245] retuning due to modification of channel 34
Nov  3 22:45:16 linux-nszr vdr: [1245] switching to channel 34
Nov  3 22:45:18 linux-nszr vdr: [1250] changing pids of channel 676 from 0+0:0:0 to 941+941:942=deu:0
Nov  3 22:45:18 linux-nszr vdr: [1250] changing caids of channel 676 from 0 to 1801,1722,1834



[-- Attachment #3: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  reply	other threads:[~2008-11-03 21:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-02 12:32 [linux-dvb] Any DVB-C tuner with working CAM? Tomas Drajsajtl
2008-11-02 21:20 ` Ruediger Dohmhardt
2008-11-03  6:51   ` [linux-dvb] TT DVB-C 2300 and CAM, Was: " Tomas Drajsajtl
2008-11-03 21:54     ` Ruediger Dohmhardt [this message]
2008-11-04 12:30       ` Tomas Drajsajtl
2009-01-12 21:46   ` [linux-dvb] " Ernst Persson
2008-11-13 13:56 ` Rune Evjen
2008-11-14 12:24   ` Tomas Drajsajtl
2008-11-17 17:07     ` Rune Evjen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=490F732A.8060505@freenet.de \
    --to=ruediger.dohmhardt@freenet.de \
    --cc=linux-dvb@drajsajtl.cz \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.