From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <49101BFF.3060908@domain.hid>
Date: Tue, 04 Nov 2008 10:55:11 +0100
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
MIME-Version: 1.0
References: <51CAD0CE1504444DBE77CBBE51A0135D533259@domain.hid>	
	<490ECE11.208@domain.hid>	
	<51CAD0CE1504444DBE77CBBE51A0135D53325A@slcmail.slc.mew.int>	
	<490F2F23.2080307@domain.hid>
	<67b6b3430811031237v4cfba0c9sf63e40a697f3da58@domain.hid>
In-Reply-To: <67b6b3430811031237v4cfba0c9sf63e40a697f3da58@domain.hid>
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai-help] fpu context switch issue
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: Mark Saiia <mark.saiia@domain.hid>
Cc: xenomai@xenomai.org

Mark Saiia wrote:
> Hello,
> 
> The switchtest output is as follows.  This was run on 2.4.5 with 2.6.26.3
> AMD Geode LX800 board.
> In order to get it to run, I had to remove modprobe xeno_native from my
> start-up script.  I don't know if that is an expected requirement prior to
> running the test.

Just to understand what I am doing, would you, or anybody else, have a
datasheet from AMD with the details of Geode FPU handling ?

-- 
                                                 Gilles.