From: Li Zefan <lizf@cn.fujitsu.com>
To: linux-ext4@vger.kernel.org
Subject: kernel BUG at fs/ext4/mballoc.c:1240!
Date: Mon, 10 Nov 2008 09:09:22 +0800 [thread overview]
Message-ID: <491789C2.7000902@cn.fujitsu.com> (raw)
I used soft raid on IA64 and got the following oops.
# fdisk -l
Disk /dev/sdc: 881.0 GB, 881005166592 bytes
255 heads, 63 sectors/track, 107109 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0000544c
Device Boot Start End Blocks Id System
/dev/sdc1 1 107109 860353011 fd Linux raid autodetect
...
Device Boot Start End Blocks Id System
/dev/sdd1 1 107109 860353011 fd Linux raid autodetect
...
Device Boot Start End Blocks Id System
/dev/sde1 1 107109 860353011 fd Linux raid autodetect
...
Device Boot Start End Blocks Id System
/dev/sdf1 1 107109 860353011 fd Linux raid autodetect
# mdadm --create /dev/md0 --level=0 --raid-devices=4 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1
# mkfs.ext4 -b 65536 /dev/md0
# mount -t ext4 /dev/md0 /mnt
# cd /mnt
# dd if=/dev/zero of=tmp_file bs=1M count=700
(stuck)
(another console)
EXT4-fs: barriers enabled
kjournald2 starting. Commit interval 5 seconds
EXT4 FS on md0, internal journal on md0:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
JBD: barrier-based sync failed on md0:8 - disabling barriers
kernel BUG at fs/ext4/mballoc.c:1240!
pdflush[12068]: bugcheck! 0 [1]
Modules linked in: ext4 jbd2 crc16 raid0 nfsd lockd nfs_acl auth_rpcgss exportfs autofs4 sunrpc ipmi_watchdog mptctl ipmi_devintf ipmi_si ipmi_msghandler vfat fat dm_mirror dm_region_hash dm_log dm_multipath dm_mod e100 mii rng_core iTCO_wdt iTCO_vendor_support lpfc tg3 scsi_transport_fc libphy button sg usb_storage shpchp mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: ipmi_watchdog]
Pid: 12068, CPU 0, comm: pdflush
psr : 0000101008526030 ifs : 8000000000000814 ip : [<a000000207dde590>] Not tainted (2.6.28-rc3-git4)
ip is at ext4_mb_use_best_found+0xd0/0xb00 [ext4]
unat: 0000000000000000 pfs : 0000000000000814 rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : 0000000000001941
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a000000207dde590 b6 : a000000100039260 b7 : a00000010000bb00
f6 : 000000000000000000000 f7 : 1003e0000000000000020
f8 : 1003ee0000040878b0000 f9 : 1003e0000000000000000
f10 : 1003ee0000040a19c0000 f11 : 1003e0000000000000000
r1 : a000000100e24b80 r2 : a000000100bc5210 r3 : 0000000000004000
r8 : 0000000000000029 r9 : 0000000000000001 r10 : a000000100a50000
r11 : ffffffffffff0420 r12 : e00000005bfbfa40 r13 : e00000005bfb0000
r14 : a000000100bc5218 r15 : e00001200ac5fe18 r16 : ffffffffffff6fd0
r17 : a000000100c3f7c8 r18 : 000000000000000a r19 : 0000000000000026
r20 : 0000000000020000 r21 : a000000100c3cb78 r22 : a000000100c3cb74
r23 : a000000100c3cb88 r24 : a000000100c3f7a0 r25 : a000000100c2dba0
r26 : a000000100c3cb74 r27 : 0000001008522030 r28 : 0000000000000034
r29 : a0000001012ce0e3 r30 : 0000000000000000 r31 : a000000100bef7d8
Call Trace:
[<a000000100015ca0>] show_stack+0x40/0xa0
sp=e00000005bfbf610 bsp=e00000005bfb1618
[<a0000001000165b0>] show_regs+0x850/0x8a0
sp=e00000005bfbf7e0 bsp=e00000005bfb15b8
[<a000000100039970>] die+0x1b0/0x2c0
sp=e00000005bfbf7e0 bsp=e00000005bfb1570
[<a000000100039ad0>] die_if_kernel+0x50/0x80
sp=e00000005bfbf7e0 bsp=e00000005bfb1540
[<a00000010066a010>] ia64_bad_break+0x230/0x460
sp=e00000005bfbf7e0 bsp=e00000005bfb1518
[<a00000010000c300>] ia64_native_leave_kernel+0x0/0x270
sp=e00000005bfbf870 bsp=e00000005bfb1518
[<a000000207dde590>] ext4_mb_use_best_found+0xd0/0xb00 [ext4]
sp=e00000005bfbfa40 bsp=e00000005bfb1478
[<a000000207ddf130>] ext4_mb_check_limits+0x170/0x1a0 [ext4]
sp=e00000005bfbfa50 bsp=e00000005bfb1440
[<a000000207de8e90>] ext4_mb_regular_allocator+0x1910/0x1f20 [ext4]
sp=e00000005bfbfa70 bsp=e00000005bfb13a8
[<a000000207dec6d0>] ext4_mb_new_blocks+0x3b0/0x1400 [ext4]
sp=e00000005bfbfad0 bsp=e00000005bfb1328
[<a000000207dda050>] ext4_ext_get_blocks+0x16d0/0x1b40 [ext4]
sp=e00000005bfbfae0 bsp=e00000005bfb1248
[<a000000207dae570>] ext4_get_blocks_wrap+0x1d0/0x4c0 [ext4]
sp=e00000005bfbfb50 bsp=e00000005bfb11d0
[<a000000207db6c70>] ext4_da_get_block_write+0xd0/0x300 [ext4]
sp=e00000005bfbfb50 bsp=e00000005bfb1180
[<a000000207dabc10>] mpage_da_map_blocks+0xf0/0xce0 [ext4]
sp=e00000005bfbfb50 bsp=e00000005bfb1118
[<a000000207db4240>] ext4_da_writepages+0x4a0/0x780 [ext4]
sp=e00000005bfbfc40 bsp=e00000005bfb1088
[<a000000100126c90>] do_writepages+0xb0/0x120
sp=e00000005bfbfcf0 bsp=e00000005bfb1060
[<a0000001001d1070>] __writeback_single_inode+0x370/0x6e0
sp=e00000005bfbfcf0 bsp=e00000005bfb1018
[<a0000001001d1cb0>] generic_sync_sb_inodes+0x4b0/0x7a0
sp=e00000005bfbfd30 bsp=e00000005bfb0fc8
[<a0000001001d1fd0>] sync_sb_inodes+0x30/0x60
sp=e00000005bfbfd30 bsp=e00000005bfb0fa0
[<a0000001001d28f0>] writeback_inodes+0x130/0x260
sp=e00000005bfbfd30 bsp=e00000005bfb0f70
[<a0000001001283a0>] background_writeout+0x140/0x1e0
sp=e00000005bfbfd30 bsp=e00000005bfb0f38
[<a000000100129460>] pdflush+0x2e0/0x4e0
sp=e00000005bfbfd80 bsp=e00000005bfb0f18
[<a0000001000b8ba0>] kthread+0xa0/0x120
sp=e00000005bfbfe30 bsp=e00000005bfb0ee8
[<a000000100014430>] kernel_thread_helper+0x30/0x60
sp=e00000005bfbfe30 bsp=e00000005bfb0ec0
[<a00000010000a0c0>] start_kernel_thread+0x20/0x40
sp=e00000005bfbfe30 bsp=e00000005bfb0ec0
reply other threads:[~2008-11-10 1:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=491789C2.7000902@cn.fujitsu.com \
--to=lizf@cn.fujitsu.com \
--cc=linux-ext4@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.