All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Sealey <matt@genesi-usa.com>
To: "Lehmann, Hans (Ritter Elektronik)" <hans.lehmann@ritter-elektronik.de>
Cc: Tim Yamin <plasm@roo.me.uk>, linuxppc-dev@ozlabs.org
Subject: Re: [PATCH]: [MPC5200] Add ATA DMA support
Date: Tue, 11 Nov 2008 08:35:51 -0600	[thread overview]
Message-ID: <49199847.5090505@genesi-usa.com> (raw)
In-Reply-To: <633A55242A59C7488FAAF5A6850929984B8133@SRVEXC01.sts.saurer.vpn>

Oddly I built 2.6.27.2 with the patch and the Efika "waited" for a disk to appear
and didn't get anywhere. If I set libata.dma=0 then it complained about missing
symbols (but not with it enabled!).

This was a clean SUSE kernel from Factory, with only the ATA patch applied with
a few hand-merges (pata_mpc52xx.c has had a line of whitespace removed at some
point, but otherwise identical).

Lehmann, Hans (Ritter Elektronik) wrote:
> Tim, Grant,
> 
> I have tested the patch on our MPC5200B based board with Kingston Elite Pro CF-card and it worked fine with DMA2. I have port the patch back to 2.6.24.7 Kernel and I can't detect problems our errors, even with big files (40 mB) over FEC wich I save to card . We get performance up to 10,5mB/s which is near to the max. speed.
> 
> Greetings
> 
> 
> 
> 
> Mit freundlichen Grüßen
> 
> Hans Lehmann
> Softwareentwicklung
> 
> Telefon	+49 (0)2191-67-2520
> Fax 	+49 (0)2191-67-703408
> e-mail 	hans.lehmann@ritter-elektronik.de
> 
> 
> 
> Ritter Elektronik GmbH
> Leverkuser Straße 65
> D-42897 Remscheid
> www.ritter-elektronik.de
> 
> Geschäftsführer: Manfred A. Wagner, Dr. Uwe Baader
> Sitz der Gesellschaft: Oberhausen
> HRB 17168 Duisburg  /  USt-ID DE 814009849
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: linuxppc-dev-bounces+hans.lehmann=ritter-elektronik.de@ozlabs.org [mailto:linuxppc-dev-bounces+hans.lehmann=ritter-elektronik.de@ozlabs.org] Im Auftrag von Tim Yamin
> Gesendet: Mittwoch, 13. August 2008 11:07
> An: Grant Likely
> Cc: linuxppc-dev@ozlabs.org
> Betreff: [WW Spam: medium] Re: [PATCH]: [MPC5200] Add ATA DMA support
> 
> On Wed, Aug 13, 2008 at 7:11 AM, Grant Likely <grant.likely@secretlab.ca> wrote:
>> Sounds good to me.  You will get more testers that way.  I can pick it 
>> up for -next if everything else looks good.
> 
> Here are the new patches; tested against 2.6.27-rc3.
> 
> Thanks,
> 
> Tim
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev

-- 
Matt Sealey <matt@genesi-usa.com>
Genesi, Manager, Developer Relations

  reply	other threads:[~2008-11-11 14:36 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <DD39B5C3F4963040ADC9768BE7E430CB03202F4F@is-hdq-exchange.marel.net>
     [not found] ` <DD39B5C3F4963040ADC9768BE7E430CB03203863@is-hdq-exchange.marel.net>
     [not found]   ` <792f5f410808111319m20d6e09bi8e9782da1fdd4aab@mail.gmail.com>
     [not found]     ` <DD39B5C3F4963040ADC9768BE7E430CB0320387D@is-hdq-exchange.marel.net>
     [not found]       ` <792f5f410808111431g8fafba1n3b10468da0d165bf@mail.gmail.com>
     [not found]         ` <DD39B5C3F4963040ADC9768BE7E430CB03203A7B@is-hdq-exchange.marel.net>
     [not found]           ` <792f5f410808120643md72e679o39692c4bfa3f285e@mail.gmail.com>
     [not found]             ` <DD39B5C3F4963040ADC9768BE7E430CB03203A94@is-hdq-exchange.marel.net>
     [not found]               ` <792f5f410808120730j7b4be4f2n7a40de880178ccca@mail.gmail.com>
     [not found]                 ` <DD39B5C3F4963040ADC9768BE7E430CB03203ADC@is-hdq-exchange.marel.net>
     [not found]                   ` <792f5f410808120830v311e0446kc8fddfb97d0b9ea6@mail.gmail.com>
2008-08-12 17:30                     ` [PATCH]: [MPC5200] Add ATA DMA support Daniel Schnell
2008-08-13  5:57                       ` Tim Yamin
2008-08-13  6:02                         ` Grant Likely
2008-08-13  6:06                           ` Tim Yamin
2008-08-13  6:11                             ` Grant Likely
2008-08-13  9:07                               ` Tim Yamin
2008-09-15  5:54                                 ` Grant Likely
2008-10-29 15:34                                   ` Matt Sealey
2008-11-11 14:04                                 ` Lehmann, Hans (Ritter Elektronik)
2008-11-11 14:35                                   ` Matt Sealey [this message]
2008-11-11 15:04                                     ` AW: " Lehmann, Hans (Ritter Elektronik)
2008-11-11 16:16                                       ` Matt Sealey
     [not found] <AclPDG6qSkF9cHawTOKR6zBfDIjvgg==>
2008-11-25 14:45 ` Lehmann, Hans (Ritter Elektronik)
2008-11-25 15:19   ` Matt Sealey
2008-12-20  7:15     ` Grant Likely
2008-12-20  7:18   ` Grant Likely
2009-01-05  9:25     ` AW: " Lehmann, Hans (Ritter Elektronik)
2009-01-05 15:31       ` Grant Likely
2009-07-09 14:24         ` Roman Fietze
2008-09-05 18:29 WITTROCK
  -- strict thread matches above, loose matches on Subject: below --
2008-06-17  8:28 Tim Yamin
2008-08-06 11:58 ` Daniel Schnell
2008-08-06 12:18   ` Tim Yamin
2008-08-06 13:26     ` Daniel Schnell
2008-08-06 14:31       ` Daniel Schnell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49199847.5090505@genesi-usa.com \
    --to=matt@genesi-usa.com \
    --cc=hans.lehmann@ritter-elektronik.de \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=plasm@roo.me.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.