From: Ned Forrester <nforrester-/d+BM93fTQY@public.gmane.org>
To: "J. Scott Merritt" <merrij3-IL7dBOYR4Vg@public.gmane.org>
Cc: spi-devel
<spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: Re: PXA270 SSP DMA Corruption
Date: Wed, 12 Nov 2008 22:19:49 -0500 [thread overview]
Message-ID: <491B9CD5.3030908@whoi.edu> (raw)
In-Reply-To: <20081112213403.402948b9.merrij3-IL7dBOYR4Vg@public.gmane.org>
J. Scott Merritt wrote:
> On Wed, 12 Nov 2008 18:10:01 -0500
> It appears that the timeout is computed based upon the "Peripheral Clock
> frequency" on the PXA270 - which would appear to be 312Mhz, (or something
> divided down from there). If it is 312Mhz, then for my SSP speed of
> 300K, I guess I need something around 10,000.
It says "peripheral clock frequency" without ever defining that phrase
(at least in the 1/2006 version of the developer's manual). Oddly on
PXA255 this frequency appears to be runclock/4 = 99.5MHz for a 400MHz
machine. I bet it is not as high as 312MHz, but you can measure it by
setting very long times, forcing the timeout (no tx data in pio mode, I
think), and perhaps using GPIO probes to trigger a scope. I did
something like that on my system. It would sure be nice to know the
answer to that, as no one using PXA270 has ever answered the question.
> Table 8-4 in my PXA manual is titled "TFT and RFT values with possible
> DMA Burst Sizes" ... for 8 bit data, it says ... for TFT > 7
> "Do not use DMA" ... Am I misinterpreting this ? I -think- that means
> that 8/8 is not a good choice ...
The table you refer to lists the values loaded into the TFT and RFT bit
fields, which are the desired threshold-1. The values passed to
pxa2xx_spi are the desired thresholds, so TFT>7 is the same as threshold>8.
> With respect to the pxa2xx_spi patch, please proceed - I will certainly
> not attempt to generate one myself.
I'll get something out in the next couple of days.
--
Ned Forrester nforrester-/d+BM93fTQY@public.gmane.org
Oceanographic Systems Lab 508-289-2226
Applied Ocean Physics and Engineering Dept.
Woods Hole Oceanographic Institution Woods Hole, MA 02543, USA
http://www.whoi.edu/sbl/liteSite.do?litesiteid=7212
http://www.whoi.edu/hpb/Site.do?id=1532
http://www.whoi.edu/page.do?pid=10079
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
next prev parent reply other threads:[~2008-11-13 3:19 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-11 22:43 PXA270 SSPSFRM gates chip select ? J. Scott Merritt
[not found] ` <20080211174339.73ca7ed5.merrij3-IL7dBOYR4Vg@public.gmane.org>
2008-02-11 22:54 ` Zik Saleeba
[not found] ` <33e9dd1c0802111454k5deeaa38o9d21cee610b79da7-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-02-12 2:51 ` David Brownell
[not found] ` <200802111851.10155.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-02-12 3:15 ` Zik Saleeba
[not found] ` <33e9dd1c0802111915q48cb80ecxb33461a9263f9295-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-02-12 4:02 ` David Brownell
2008-02-12 3:24 ` Ned Forrester
[not found] ` <47B11178.6090904-/d+BM93fTQY@public.gmane.org>
2008-02-12 3:48 ` Zik Saleeba
[not found] ` <33e9dd1c0802111948u2256d0adj8caa478073795d78-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-02-12 4:16 ` David Brownell
2008-02-12 4:19 ` Zik Saleeba
2008-02-12 4:43 ` Ned Forrester
[not found] ` <47B12406.9040208-/d+BM93fTQY@public.gmane.org>
2008-02-12 5:24 ` Zik Saleeba
[not found] ` <33e9dd1c0802112124y5ae8dd39ua9078f2b3878a018-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-02-12 20:48 ` Zik Saleeba
2008-02-12 4:20 ` David Brownell
2008-02-11 23:26 ` Ned Forrester
[not found] ` <47B0D9A4.6080104-/d+BM93fTQY@public.gmane.org>
2008-02-12 4:08 ` Ned Forrester
2008-11-07 16:43 ` PXA270 SSP DMA Corruption J. Scott Merritt
[not found] ` <20081107114312.2f34b389.merrij3-IL7dBOYR4Vg@public.gmane.org>
2008-11-07 18:59 ` Ned Forrester
2008-11-07 19:00 ` PXA270 SSP DMA Corruption - correction J. Scott Merritt
[not found] ` <20081107184819.54baa679.merrij3@rpi.edu>
[not found] ` <491B6249.7070407@whoi.edu>
[not found] ` <491B6249.7070407-/d+BM93fTQY@public.gmane.org>
2008-11-13 1:24 ` PXA270 SSP DMA Corruption J. Scott Merritt
[not found] ` <20081112202438.61c28cf4.merrij3-IL7dBOYR4Vg@public.gmane.org>
2008-11-13 1:48 ` Ned Forrester
[not found] ` <491B8783.9050800-/d+BM93fTQY@public.gmane.org>
2008-11-13 1:59 ` Ned Forrester
[not found] ` <20081112213403.402948b9.merrij3@rpi.edu>
[not found] ` <20081112213403.402948b9.merrij3-IL7dBOYR4Vg@public.gmane.org>
2008-11-13 3:19 ` Ned Forrester [this message]
[not found] ` <20081113120134.70d533c8.merrij3@rpi.edu>
[not found] ` <20081113120134.70d533c8.merrij3-IL7dBOYR4Vg@public.gmane.org>
2008-11-13 18:54 ` Ned Forrester
-- strict thread matches above, loose matches on Subject: below --
2008-11-12 23:14 Ned Forrester
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=491B9CD5.3030908@whoi.edu \
--to=nforrester-/d+bm93ftqy@public.gmane.org \
--cc=merrij3-IL7dBOYR4Vg@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.