From: Wang Chen <wangchen@cn.fujitsu.com>
To: David Miller <davem@davemloft.net>
Cc: jgarzik@pobox.com, netdev@vger.kernel.org
Subject: [PATCH net-next v3]netdevice: 82596: Convert netdev->priv to netdev_priv
Date: Tue, 18 Nov 2008 11:57:25 +0800 [thread overview]
Message-ID: <49223D25.9030006@cn.fujitsu.com> (raw)
In-Reply-To: <492182C8.6060704@cn.fujitsu.com>
1. When alloc_etherdev(), no memory be allocated to netdev->priv.
2. And it's need to get a whole page for priv.
For these reasons, use netdev->ml_priv to point to the page is the
best method to convert directly reference of netdev->priv.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
---
drivers/net/82596.c | 28 ++++++++++++++--------------
1 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 717fe2f..23fe416 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -457,7 +457,7 @@ static inline int wait_cfg(struct net_device *dev, struct i596_cmd *cmd, int del
static void i596_display_data(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
struct i596_cmd *cmd;
struct i596_rfd *rfd;
struct i596_rbd *rbd;
@@ -527,7 +527,7 @@ static irqreturn_t i596_error(int irq, void *dev_id)
static inline void init_rx_bufs(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int i;
struct i596_rfd *rfd;
struct i596_rbd *rbd;
@@ -578,7 +578,7 @@ static inline void init_rx_bufs(struct net_device *dev)
static inline void remove_rx_bufs(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
struct i596_rbd *rbd;
int i;
@@ -592,7 +592,7 @@ static inline void remove_rx_bufs(struct net_device *dev)
static void rebuild_rx_bufs(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int i;
/* Ensure rx frame/buffer descriptors are tidy */
@@ -611,7 +611,7 @@ static void rebuild_rx_bufs(struct net_device *dev)
static int init_i596_mem(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
#if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT)
short ioaddr = dev->base_addr;
#endif
@@ -764,7 +764,7 @@ failed:
static inline int i596_rx(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
struct i596_rfd *rfd;
struct i596_rbd *rbd;
int frames = 0;
@@ -958,7 +958,7 @@ static void i596_reset(struct net_device *dev, struct i596_private *lp,
static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int ioaddr = dev->base_addr;
unsigned long flags;
@@ -1028,7 +1028,7 @@ static int i596_open(struct net_device *dev)
static void i596_tx_timeout (struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int ioaddr = dev->base_addr;
/* Transmitter timeout, serious problems. */
@@ -1057,7 +1057,7 @@ static void i596_tx_timeout (struct net_device *dev)
static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
struct tx_cmd *tx_cmd;
struct i596_tbd *tbd;
short length = skb->len;
@@ -1239,9 +1239,9 @@ found:
dev->tx_timeout = i596_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->priv = (void *)(dev->mem_start);
+ dev->ml_priv = (void *)(dev->mem_start);
- lp = dev->priv;
+ lp = dev->ml_priv;
DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
"lp->scb at 0x%08lx\n",
dev->name, (unsigned long)lp,
@@ -1302,7 +1302,7 @@ static irqreturn_t i596_interrupt(int irq, void *dev_id)
}
ioaddr = dev->base_addr;
- lp = dev->priv;
+ lp = dev->ml_priv;
spin_lock (&lp->lock);
@@ -1445,7 +1445,7 @@ static irqreturn_t i596_interrupt(int irq, void *dev_id)
static int i596_close(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
unsigned long flags;
netif_stop_queue(dev);
@@ -1495,7 +1495,7 @@ static int i596_close(struct net_device *dev)
static void set_multicast_list(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int config = 0, cnt;
DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
--
1.5.3.4
next prev parent reply other threads:[~2008-11-18 3:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-17 6:04 [PATCH net-next]netdevice: 82596: Convert netdev->priv to netdev_priv Wang Chen
2008-11-17 6:36 ` David Miller
2008-11-17 6:58 ` Wang Chen
2008-11-17 9:24 ` [PATCH net-next v2]netdevice: " Wang Chen
2008-11-17 9:29 ` David Miller
2008-11-17 14:42 ` Wang Chen
2008-11-18 3:57 ` Wang Chen [this message]
2008-11-20 9:01 ` [PATCH net-next v3]netdevice: " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49223D25.9030006@cn.fujitsu.com \
--to=wangchen@cn.fujitsu.com \
--cc=davem@davemloft.net \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.