From: Eric Sandeen <sandeen@sandeen.net>
To: xfs-oss <xfs@oss.sgi.com>
Subject: PATCH 3/7] xfsprogs parallel build
Date: Mon, 17 Nov 2008 21:57:33 -0600 [thread overview]
Message-ID: <49223D2D.7060206@sandeen.net> (raw)
In-Reply-To: <49223C13.2080507@sandeen.net>
Allow parallel builds of the xfsprogs package
I got tired of waiting for xfsprogs to build
serially...
On a 16p altix, make -j16 (excluding the configure
phase) went from 2m16s to 15s.
I tossed this into an rpm and did a fedora scratch
build on all arches, they all passed - some of them,
at least, should have been doing parallel builds too.
So this has had reasonable testing.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
---
Index: xfs-cmds/xfsprogs/Makefile
===================================================================
--- xfs-cmds.orig/xfsprogs/Makefile
+++ xfs-cmds/xfsprogs/Makefile
@@ -15,24 +15,36 @@ LSRCFILES = configure configure.in Makep
LDIRT = config.log .dep config.status config.cache confdefs.h conftest* \
Logs/* built .census install.* install-dev.* *.gz
-SUBDIRS = include libxfs libxlog libxcmd libhandle libdisk \
- copy db estimate fsck growfs io logprint mkfs quota mdrestore repair rtcp \
- m4 man doc po debian build
+LIB_SUBDIRS = include libxfs libxlog libxcmd libhandle libdisk
+TOOL_SUBDIRS = copy db estimate fsck growfs io logprint mkfs quota \
+ mdrestore repair rtcp m4 man doc po debian build
-default: $(CONFIGURE)
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
+
+default: include/builddefs include/platform_defs.h
ifeq ($(HAVE_BUILDDEFS), no)
$(MAKE) -C . $@
else
- $(SUBDIRS_MAKERULE)
+ $(MAKE) $(SUBDIRS)
endif
+# tool/lib dependencies
+libxcmd: include
+copy mdrestore: libxfs
+db logprint: libxfs libxlog
+growfs: libxfs libxcmd
+io: libxcmd libhandle
+mkfs: libxfs libdisk
+quota: libxcmd
+repair: libxfs libxlog
+
ifeq ($(HAVE_BUILDDEFS), yes)
include $(BUILDRULES)
else
clean: # if configure hasn't run, nothing to clean
endif
-$(CONFIGURE):
+include/builddefs:
autoconf
./configure \
--prefix=/ \
@@ -48,19 +60,32 @@ $(CONFIGURE):
$$LOCAL_CONFIGURE_OPTIONS
touch .census
+include/platform_defs.h: include/builddefs
+## Recover from the removal of $@
+ @if test -f $@; then :; else \
+ rm -f include/builddefs; \
+ $(MAKE) $(AM_MAKEFLAGS) include/builddefs; \
+ fi
+
aclocal.m4::
aclocal --acdir=`pwd`/m4 --output=$@
-install: default
- $(SUBDIRS_MAKERULE)
+install: default $(addsuffix -install,$(SUBDIRS))
$(INSTALL) -m 755 -d $(PKG_DOC_DIR)
$(INSTALL) -m 644 README $(PKG_DOC_DIR)
-install-dev: default
- $(SUBDIRS_MAKERULE)
+install-dev: default $(addsuffix -install-dev,$(SUBDIRS))
+
+install-qa: install $(addsuffix -install-qa,$(SUBDIRS))
+
+%-install:
+ $(MAKE) -C $* install
+
+%-install-dev:
+ $(MAKE) -C $* install-dev
-install-qa: install
- $(SUBDIRS_MAKERULE)
+%-install-qa:
+ $(MAKE) -C $* install-qa
realclean distclean: clean
rm -f $(LDIRT) $(CONFIGURE)
Index: xfs-cmds/xfsprogs/include/buildrules
===================================================================
--- xfs-cmds.orig/xfsprogs/include/buildrules
+++ xfs-cmds/xfsprogs/include/buildrules
@@ -6,16 +6,19 @@ _BUILDRULES_INCLUDED_ = 1
include $(TOPDIR)/include/builddefs
-clean clobber : $(SUBDIRS)
+clean clobber : $(addsuffix -clean,$(SUBDIRS))
rm -f $(DIRT)
@rm -fr .libs
- $(SUBDIRS_MAKERULE)
+%-clean:
+ $(MAKE) -C $* clean
# Never blow away subdirs
ifdef SUBDIRS
.PRECIOUS: $(SUBDIRS)
+.PHONY: $(SUBDIRS)
+
$(SUBDIRS):
- $(SUBDIRS_MAKERULE)
+ $(MAKE) -C $@
endif
#
@@ -69,11 +72,13 @@ ifdef LTLIBRARY
DEPENDSCRIPT := $(DEPENDSCRIPT) | $(SED) -e 's,^\([^:]*\)\.o,\1.lo,'
endif
-depend : $(CFILES) $(HFILES)
- $(SUBDIRS_MAKERULE)
+depend : $(CFILES) $(HFILES) $(addsuffix -depend,$(SUBDIRS))
$(DEPENDSCRIPT) > .dep
test -s .dep || rm -f .dep
+%-depend:
+ $(MAKE) -C $* depend
+
# Include dep, but only if it exists
ifeq ($(shell test -f .dep && echo .dep), .dep)
include .dep
Index: xfs-cmds/xfsprogs/include/buildmacros
===================================================================
--- xfs-cmds.orig/xfsprogs/include/buildmacros
+++ xfs-cmds/xfsprogs/include/buildmacros
@@ -123,14 +123,6 @@ INSTALL_LINGUAS = \
done
endif
-SUBDIRS_MAKERULE = \
- @for d in $(SUBDIRS) ""; do \
- if test -d "$$d" -a ! -z "$$d"; then \
- $(ECHO) === $$d ===; \
- $(MAKEF) -C $$d $@ || exit $$?; \
- fi; \
- done
-
MAN_MAKERULE = \
@for f in *.[12345678] ""; do \
if test ! -z "$$f"; then \
Index: xfs-cmds/xfsprogs/man/Makefile
===================================================================
--- xfs-cmds.orig/xfsprogs/man/Makefile
+++ xfs-cmds/xfsprogs/man/Makefile
@@ -7,7 +7,16 @@ include $(TOPDIR)/include/builddefs
SUBDIRS = man3 man5 man8
-default install install-dev : $(SUBDIRS)
- $(SUBDIRS_MAKERULE)
+default : $(SUBDIRS)
+
+install : $(addsuffix -install,$(SUBDIRS))
+
+install-dev : $(addsuffix -install-dev,$(SUBDIRS))
+
+%-install:
+ $(MAKE) -C $* install
+
+%-install-dev:
+ $(MAKE) -C $* install-dev
include $(BUILDRULES)
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2008-11-18 5:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-18 3:52 [PATCH 0/7] xfs-cmds parallel build patches Eric Sandeen
2008-11-18 3:55 ` [PATCH 1/7] attr parallel build Eric Sandeen
2008-11-18 3:56 ` [PATCH 2/7] acl " Eric Sandeen
2008-11-18 3:57 ` Eric Sandeen [this message]
2008-11-18 3:58 ` [PATCH 4/7] dmapi " Eric Sandeen
2008-11-18 4:00 ` [PATCH 5/7] xfsdump " Eric Sandeen
2008-11-18 4:01 ` [PATCH 6/7] nfs4acl " Eric Sandeen
2008-11-18 4:03 ` [PATCH 7/7] xfstests " Eric Sandeen
[not found] ` <op.ukx09mh13jf8g2@pc-bnaujok.melbourne.sgi.com>
2008-11-21 0:48 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49223D2D.7060206@sandeen.net \
--to=sandeen@sandeen.net \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.