From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brian Date: Fri, 21 Nov 2008 10:04:00 +1000 Subject: [ath9k-devel] It Works! In-Reply-To: <20081120035255.GJ5900@tesla> References: <20081119174129.GA14050@parabola.pavlovmedia.corp> <1227117298.4992.2.camel@jm-desktop> <20081119175817.GA3131@parabola.pavlovmedia.corp> <49249490.6090002@astronomicalresearchaustralia.org> <20081120035255.GJ5900@tesla> Message-ID: <4925FAF0.3040202@astronomicalresearchaustralia.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Luis, > So we had over 40 patches pending which John just merged today. You > can do a git pull or wait for compat-wireless to get updated. Took your suggestion and did a git-pull. Did a recompile after carefully checking menuconfig again. The only major thing I have done is to remove any reference to IPV6. Rebooted and everything came up and WORKED!:) Not sure what you changed but it has done the trick. I have been up for about 30mins with no issues. 2.6.28-rc5-wl-W #11 SMP With this result Mode Rate (Mbps) Signal (%) 802.11n (2.4GHz) 78 100 So while I am happy the 11n is now working the rate does not seem to be as expected. ISSUES so far 1) When I do a ping there is about a 10-15sec delay before the responses start coming back. 2) I cannot start WPA_GUI or WPA_CLI it comes back with Selected interface 'wlan0.pid' Trying to connect to '/var/run/wpa_supplicant/wlan0.pid' Failed to open control connection to wpa_supplicant. PING failed - trying to reconnect The pid is correct. So many thanks to the atheros team for getting ath9k going. Brian