From: Matthew Ranostay <mranostay@embeddedalley.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH] hda: Add STAC_DELL_M4_3 quirk
Date: Thu, 20 Nov 2008 20:31:16 -0500 [thread overview]
Message-ID: <49260F64.5040303@embeddedalley.com> (raw)
In-Reply-To: <s5h8wreooic.wl%tiwai@suse.de>
Takashi Iwai wrote:
> At Wed, 19 Nov 2008 21:48:51 -0500,
> Matthew Ranostay wrote:
>> Add PCI quirk STAC_DELL_M4_3 for 92hd71bxx based laptops.
>
> Which laptops, more exactly? Recently I received bug reports about
> Dell Studio laptops, and wondering whether it's for such models.
>
>
>> @@ -4650,14 +4661,20 @@ again:
>>
>> switch (spec->board_config) {
>> case STAC_HP_M4:
>> - spec->num_dmics = 0;
>> - spec->num_smuxes = 0;
>> - spec->num_dmuxes = 0;
>> -
>> /* enable internal microphone */
>> stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
>> stac92xx_auto_set_pinctl(codec, 0x0e,
>> AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
>
> Please add a comment about fall-through here.
>
> Also, update Documentation/*/ALSA-Configuration.txt as well.
>
>
> thanks,
>
> Takashi
>
Add PCI quirk STAC_DELL_M4_3 for 92hd71bxx based laptops and desktops.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
---
diff --git a/Documentation/ALSA-Configuration.txt
b/Documentation/ALSA-Configuration.txt
index 3ab5fb1..8b99a22 100644
--- a/Documentation/ALSA-Configuration.txt
+++ b/Documentation/ALSA-Configuration.txt
@@ -1076,6 +1076,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix.
This was removed.
ref Reference board
dell-m4-1 Dell desktops
dell-m4-2 Dell desktops
+ dell-m4-3 Dell desktops
STAC92HD73*
ref Reference board
diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c
index e0298df..f1a0f13 100644
--- a/pci/hda/patch_sigmatel.c
+++ b/pci/hda/patch_sigmatel.c
@@ -83,6 +83,7 @@ enum {
STAC_92HD71BXX_REF,
STAC_DELL_M4_1,
STAC_DELL_M4_2,
+ STAC_DELL_M4_3,
STAC_HP_M4,
STAC_92HD71BXX_MODELS
};
@@ -1689,10 +1690,17 @@ static unsigned int dell_m4_2_pin_configs[11] = {
0x40f000f0, 0x044413b0, 0x044413b0,
};
+static unsigned int dell_m4_3_pin_configs[11] = {
+ 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
+ 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
+ 0x40f000f0, 0x044413b0, 0x044413b0,
+};
+
static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
[STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs,
[STAC_DELL_M4_1] = dell_m4_1_pin_configs,
[STAC_DELL_M4_2] = dell_m4_2_pin_configs,
+ [STAC_DELL_M4_3] = dell_m4_3_pin_configs,
[STAC_HP_M4] = NULL,
};
@@ -1700,6 +1708,7 @@ static const char
*stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
[STAC_92HD71BXX_REF] = "ref",
[STAC_DELL_M4_1] = "dell-m4-1",
[STAC_DELL_M4_2] = "dell-m4-2",
+ [STAC_DELL_M4_3] = "dell-m4-3",
[STAC_HP_M4] = "hp-m4",
};
@@ -1731,6 +1740,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
"unknown Dell", STAC_DELL_M4_2),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264,
"unknown Dell", STAC_DELL_M4_2),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa,
+ "unknown Dell", STAC_DELL_M4_3),
{} /* terminator */
};
@@ -4650,14 +4661,21 @@ again:
switch (spec->board_config) {
case STAC_HP_M4:
- spec->num_dmics = 0;
- spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
-
/* enable internal microphone */
stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
stac92xx_auto_set_pinctl(codec, 0x0e,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
+ /* fallthru */
+ case STAC_DELL_M4_2:
+ spec->num_dmics = 0;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
+ break;
+ case STAC_DELL_M4_1:
+ case STAC_DELL_M4_3:
+ spec->num_dmics = 1;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
next prev parent reply other threads:[~2008-11-21 1:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-20 2:48 [PATCH] hda: Add STAC_DELL_M4_3 quirk Matthew Ranostay
2008-11-20 7:16 ` Takashi Iwai
2008-11-21 1:31 ` Matthew Ranostay [this message]
2008-11-21 1:35 ` Takashi Iwai
2008-11-21 2:02 ` Matthew Ranostay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49260F64.5040303@embeddedalley.com \
--to=mranostay@embeddedalley.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.