From: Adrian Hunter <ext-adrian.hunter@nokia.com>
To: Tony Lindgren <tony@atomide.com>
Cc: "linux-omap@vger.kernel.org Mailing List" <linux-omap@vger.kernel.org>
Subject: [PATCH 2/9] OMAP: HSMMC: Ensure fclk is running before accessing HSMMC registers
Date: Fri, 21 Nov 2008 11:24:21 +0200 [thread overview]
Message-ID: <49267E45.8040804@nokia.com> (raw)
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
---
drivers/mmc/host/omap_hsmmc.c | 32 ++++++++++++++++++++------------
1 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index ee21a64..2eed691 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -154,26 +154,24 @@ struct mmc_omap_host {
struct timer_list idle_timer;
spinlock_t clk_lock; /* for changing enabled state */
- int fclk_enabled:1;
+ unsigned int fclk_enabled:1;
struct omap_mmc_platform_data *pdata;
};
-int mmc_omap_fclk_state(struct mmc_omap_host *host, unsigned int state)
+static int mmc_omap_fclk_state(struct mmc_omap_host *host, unsigned int state)
{
unsigned long flags;
- int ret;
+ int ret = 0;
spin_lock_irqsave(&host->clk_lock, flags);
if (host->fclk_enabled != state) {
if (state == ON) {
- if (host->fclk_enabled == OFF) {
- ret = clk_enable(host->fclk);
- if (ret != 0)
- return ret;
- dev_dbg(mmc_dev(host->mmc),
- "mmc_fclk: enabled\n");
- }
+ ret = clk_enable(host->fclk);
+ if (ret != 0)
+ goto err_out;
+
+ dev_dbg(mmc_dev(host->mmc), "mmc_fclk: enabled\n");
/* Revisit: Change the timer bump based on real
MMC usage characteristics */
mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
@@ -184,8 +182,10 @@ int mmc_omap_fclk_state(struct mmc_omap_host *host, unsigned int state)
}
host->fclk_enabled = state;
}
+
+err_out:
spin_unlock_irqrestore(&host->clk_lock, flags);
- return 0;
+ return ret;
}
static void mmc_omap_idle_timer(unsigned long data)
@@ -557,6 +557,7 @@ static void mmc_omap_detect(struct work_struct *work)
mmc_carddetect_work);
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
+ mmc_omap_fclk_state(host, ON);
if (host->carddetect) {
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
/*
@@ -785,8 +786,8 @@ static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
WARN_ON(host->mrq != NULL);
host->mrq = req;
- mmc_omap_prepare_data(host, req);
mmc_omap_fclk_state(host, ON);
+ mmc_omap_prepare_data(host, req);
mmc_omap_start_command(host, req->cmd, req->data);
}
@@ -798,6 +799,8 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
unsigned long regval;
unsigned long timeout;
+ mmc_omap_fclk_state(host, ON);
+
switch (ios->power_mode) {
case MMC_POWER_OFF:
mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
@@ -869,6 +872,8 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
OMAP_HSMMC_WRITE(host->base, CON,
OMAP_HSMMC_READ(host->base, CON) | OD);
+ if (ios->power_mode == MMC_POWER_OFF)
+ mmc_omap_fclk_state(host, OFF);
}
static int omap_hsmmc_get_cd(struct mmc_host *mmc)
@@ -1120,6 +1125,7 @@ static int omap_mmc_remove(struct platform_device *pdev)
struct resource *res;
u16 vdd = 0;
+ mmc_omap_fclk_state(host, ON);
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
/*
* Set the vdd back to 3V,
@@ -1170,6 +1176,8 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
return 0;
if (host) {
+ mmc_omap_fclk_state(host, ON);
+
ret = mmc_suspend_host(host->mmc, state);
if (ret == 0) {
host->suspended = 1;
--
1.5.4.3
next reply other threads:[~2008-11-21 9:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-21 9:24 Adrian Hunter [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-11-21 9:23 [PATCH 0/9] OMAP: HSMMC: Patches Adrian Hunter
2008-11-21 9:37 ` Adrian Hunter
2008-11-21 9:44 ` [PATCH 2/9] OMAP: HSMMC: Ensure fclk is running before accessing HSMMC registers Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49267E45.8040804@nokia.com \
--to=ext-adrian.hunter@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.