All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
To: Tony Lindgren <tony@atomide.com>
Cc: "linux-omap@vger.kernel.org Mailing List" <linux-omap@vger.kernel.org>
Subject: [PATCH 3/9] OMAP: HSMMC: Make fclk disable request driven.
Date: Fri, 21 Nov 2008 11:24:35 +0200	[thread overview]
Message-ID: <49267E53.3070607@nokia.com> (raw)

Start idle timer only at the end of request or request like operation
such card detect, set_ios, probe, or resume. This will ensure the fclk is
disable quickly after the operation is done, but never too early.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
---
 drivers/mmc/host/omap_hsmmc.c |   15 ++++++++++-----
 1 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 2eed691..a134f76 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -122,7 +122,7 @@
 	__raw_writel((val), (base) + OMAP_HSMMC_##reg)
 
 enum {OFF = 0, ON};
-#define IDLE_TIMEOUT (5*HZ)
+#define IDLE_TIMEOUT (jiffies_to_msecs(10))
 
 struct mmc_omap_host {
 	struct	device		*dev;
@@ -165,6 +165,7 @@ static int mmc_omap_fclk_state(struct mmc_omap_host *host, unsigned int state)
 	int ret = 0;
 
 	spin_lock_irqsave(&host->clk_lock, flags);
+	del_timer(&host->idle_timer);
 	if (host->fclk_enabled != state) {
 		if (state == ON) {
 			ret = clk_enable(host->fclk);
@@ -172,13 +173,9 @@ static int mmc_omap_fclk_state(struct mmc_omap_host *host, unsigned int state)
 				goto err_out;
 
 			dev_dbg(mmc_dev(host->mmc), "mmc_fclk: enabled\n");
-			/* Revisit: Change the timer bump based on real
-			   MMC usage characteristics */
-			mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
 		} else {
 			clk_disable(host->fclk);
 			dev_dbg(mmc_dev(host->mmc), "mmc_fclk: disabled\n");
-			del_timer(&host->idle_timer);
 		}
 		host->fclk_enabled = state;
 	}
@@ -335,6 +332,7 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
 
 	if (!data->stop) {
 		host->mrq = NULL;
+		mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
 		mmc_request_done(host->mmc, data->mrq);
 		return;
 	}
@@ -363,6 +361,7 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
 	}
 	if (host->data == NULL || cmd->error) {
 		host->mrq = NULL;
+		mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
 		mmc_request_done(host->mmc, cmd->mrq);
 	}
 }
@@ -575,6 +574,7 @@ static void mmc_omap_detect(struct work_struct *work)
 		while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD) ;
 		mmc_detect_change(host->mmc, (HZ * 50) / 1000);
 	}
+	mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
 }
 
 /*
@@ -874,6 +874,8 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	if (ios->power_mode == MMC_POWER_OFF)
 		mmc_omap_fclk_state(host, OFF);
+	else
+		mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
 }
 
 static int omap_hsmmc_get_cd(struct mmc_host *mmc)
@@ -1088,6 +1090,7 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto err_cover_switch;
 	}
+	mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
 
 	return 0;
 
@@ -1250,6 +1253,8 @@ static int omap_mmc_resume(struct platform_device *pdev)
 		ret = mmc_resume_host(host->mmc);
 		if (ret == 0)
 			host->suspended = 0;
+
+		mod_timer(&host->idle_timer, jiffies + IDLE_TIMEOUT);
 	}
 
 	return ret;
-- 
1.5.4.3

             reply	other threads:[~2008-11-21  9:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-21  9:24 Adrian Hunter [this message]
2008-11-26 19:08 ` [PATCH 3/9] OMAP: HSMMC: Make fclk disable request driven Tony Lindgren
2008-11-27  8:40   ` Adrian Hunter
  -- strict thread matches above, loose matches on Subject: below --
2008-11-21  9:23 [PATCH 0/9] OMAP: HSMMC: Patches Adrian Hunter
2008-11-21  9:37 ` Adrian Hunter
2008-11-21  9:45   ` [PATCH 3/9] OMAP: HSMMC: Make fclk disable request driven Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49267E53.3070607@nokia.com \
    --to=ext-adrian.hunter@nokia.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.