From: Maxim Levitsky <maximlevitsky@gmail.com>
To: Bob Copeland <me@bobcopeland.com>
Cc: linux-wireless@vger.kernel.org, ath5k-devel@lists.ath5k.org
Subject: Bugs in ath5k on aspire one (AR2425)
Date: Fri, 21 Nov 2008 21:58:17 +0200 [thread overview]
Message-ID: <492712D9.7080004@gmail.com> (raw)
Hi,
I captured few errors in dmesg, will post them here.
If I see more errors, I add them to this thread.
[ 69.516498] ath5k phy0: gain calibration timeout (2412MHz)
[ 69.516509] ath5k phy0: can't reset hardware (-11)
[ 69.516516] phy0: failed to restore operational channel after scan
[ 69.628572] ath5k phy0: noise floor calibration failed (2412MHz)
[ 69.686894] ath5k phy0: noise floor calibration failed (2417MHz)
[ 69.770067] ath5k phy0: noise floor calibration failed (2417MHz)
[ 70.419785] ath5k phy0: gain calibration timeout (2422MHz)
[ 70.419800] ath5k phy0: can't reset hardware (-11)
[ 70.419809] phy0: failed to set freq to 2422 MHz for scan
[ 71.356436] ath5k phy0: gain calibration timeout (2427MHz)
[ 71.356450] ath5k phy0: can't reset hardware (-11)
[ 71.356458] phy0: failed to set freq to 2427 MHz for scan
[ 72.119219] ath5k phy0: gain calibration timeout (2432MHz)
[ 72.119234] phy0: failed to set freq to 2432 MHz for scan
[ 72.764447] phy0: failed to set freq to 2437 MHz for scan
[ 73.410438] phy0: failed to set freq to 2442 MHz for scan
[ 74.027807] phy0: failed to set freq to 2447 MHz for scan
[ 74.640495] __ratelimit: 7 callbacks suppressed
[ 74.640504] ath5k phy0: gain calibration timeout (2452MHz)
[ 74.640511] ath5k phy0: can't reset hardware (-11)
[ 74.640517] phy0: failed to set freq to 2452 MHz for scan
[ 75.256551] ath5k phy0: gain calibration timeout (2457MHz)
[ 75.256565] ath5k phy0: can't reset hardware (-11)
[ 75.256573] phy0: failed to set freq to 2457 MHz for scan
[ 75.874414] ath5k phy0: gain calibration timeout (2462MHz)
[ 75.874424] ath5k phy0: can't reset hardware (-11)
[ 75.874430] phy0: failed to set freq to 2462 MHz for scan
[ 76.488436] ath5k phy0: gain calibration timeout (2412MHz)
[ 76.488447] ath5k phy0: can't reset hardware (-11)
[ 76.488452] phy0: failed to restore operational channel after scan
[ 76.488543] wlan0: authenticate with AP 00:1b:9e:d8:77:02
[ 76.688125] wlan0: authenticate with AP 00:1b:9e:d8:77:02
[ 76.889098] wlan0: authenticate with AP 00:1b:9e:d8:77:02
[ 77.088122] wlan0: authentication with AP 00:1b:9e:d8:77:02 timed out
[ 78.415786] ath5k phy0: noise floor calibration timeout (2417MHz)
[ 78.810771] ath5k phy0: gain calibration timeout (2417MHz)
[ 78.810782] phy0: failed to set freq to 2417 MHz for scan
[ 79.427510] phy0: failed to set freq to 2422 MHz for scan
[ 80.056900] __ratelimit: 3 callbacks suppressed
[ 80.056910] ath5k phy0: gain calibration timeout (2427MHz)
[ 80.056919] ath5k phy0: can't reset hardware (-11)
[ 80.056925] phy0: failed to set freq to 2427 MHz for scan
[ 80.670529] ath5k phy0: gain calibration timeout (2432MHz)
[ 80.670540] ath5k phy0: can't reset hardware (-11)
[ 80.670546] phy0: failed to set freq to 2432 MHz for scan
[ 81.285272] ath5k phy0: gain calibration timeout (2437MHz)
[ 81.285285] ath5k phy0: can't reset hardware (-11)
[ 81.285294] phy0: failed to set freq to 2437 MHz for scan
[ 81.911449] ath5k phy0: gain calibration timeout (2442MHz)
[ 81.911461] ath5k phy0: can't reset hardware (-11)
[ 81.911470] phy0: failed to set freq to 2442 MHz for scan
[ 82.526023] ath5k phy0: gain calibration timeout (2447MHz)
[ 82.526034] ath5k phy0: can't reset hardware (-11)
[ 82.526040] phy0: failed to set freq to 2447 MHz for scan
[ 83.141962] phy0: failed to set freq to 2452 MHz for scan
[ 83.759025] phy0: failed to set freq to 2457 MHz for scan
[ 84.373688] phy0: failed to set freq to 2462 MHz for scan
[ 84.990322] phy0: failed to restore operational channel after scan
[ 89.419876] __ratelimit: 8 callbacks suppressed
[ 89.419890] ath5k phy0: noise floor calibration timeout (2412MHz)
[ 90.087509] ath5k phy0: gain calibration timeout (2417MHz)
[ 90.087519] ath5k phy0: can't reset hardware (-11)
[ 90.087525] phy0: failed to set freq to 2417 MHz for scan
[ 90.700892] ath5k phy0: gain calibration timeout (2422MHz)
[ 90.700903] ath5k phy0: can't reset hardware (-11)
[ 90.700909] phy0: failed to set freq to 2422 MHz for scan
[ 91.315752] ath5k phy0: gain calibration timeout (2427MHz)
[ 91.315763] ath5k phy0: can't reset hardware (-11)
[ 91.315770] phy0: failed to set freq to 2427 MHz for scan
[ 91.935144] ath5k phy0: gain calibration timeout (2432MHz)
[ 91.935155] ath5k phy0: can't reset hardware (-11)
[ 91.935161] phy0: failed to set freq to 2432 MHz for scan
[ 92.550491] ath5k phy0: gain calibration timeout (2437MHz)
[ 92.550505] phy0: failed to set freq to 2437 MHz for scan
[ 93.220305] phy0: failed to set freq to 2442 MHz for scan
[ 93.837228] phy0: failed to set freq to 2447 MHz for scan
[ 94.450800] phy0: failed to set freq to 2452 MHz for scan
[ 95.069019] phy0: failed to set freq to 2457 MHz for scan
[ 95.690239] __ratelimit: 9 callbacks suppressed
[ 95.690251] ath5k phy0: gain calibration timeout (2462MHz)
[ 95.690261] ath5k phy0: can't reset hardware (-11)
[ 95.690269] phy0: failed to set freq to 2462 MHz for scan
[ 96.305163] ath5k phy0: gain calibration timeout (2412MHz)
[ 96.305173] ath5k phy0: can't reset hardware (-11)
[ 96.305179] phy0: failed to restore operational channel after scan
[ 100.084643] ath5k phy0: noise floor calibration failed (2412MHz)
[ 100.689317] ath5k phy0: gain calibration timeout (2417MHz)
[ 100.689328] ath5k phy0: can't reset hardware (-11)
[ 100.689334] phy0: failed to set freq to 2417 MHz for scan
[ 101.308123] ath5k phy0: gain calibration timeout (2422MHz)
[ 101.308134] ath5k phy0: can't reset hardware (-11)
[ 101.308140] phy0: failed to set freq to 2422 MHz for scan
[ 101.923409] ath5k phy0: gain calibration timeout (2427MHz)
[ 101.923419] ath5k phy0: can't reset hardware (-11)
[ 101.923425] phy0: failed to set freq to 2427 MHz for scan
[ 102.536898] ath5k phy0: gain calibration timeout (2432MHz)
[ 102.536911] ath5k phy0: can't reset hardware (-11)
[ 102.536920] phy0: failed to set freq to 2432 MHz for scan
[ 103.153227] ath5k phy0: gain calibration timeout (2437MHz)
[ 103.153238] ath5k phy0: can't reset hardware (-11)
[ 103.153244] phy0: failed to set freq to 2437 MHz for scan
[ 103.766742] ath5k phy0: gain calibration timeout (2442MHz)
[ 103.766753] ath5k phy0: can't reset hardware (-11)
[ 103.766759] phy0: failed to set freq to 2442 MHz for scan
[ 104.382792] phy0: failed to set freq to 2447 MHz for scan
[ 104.998713] phy0: failed to set freq to 2452 MHz for scan
[ 105.612695] phy0: failed to set freq to 2457 MHz for scan
[ 106.227980] phy0: failed to set freq to 2462 MHz for scan
[ 106.846579] __ratelimit: 8 callbacks suppressed
[ 106.846591] ath5k phy0: gain calibration timeout (2412MHz)
[ 106.846601] ath5k phy0: can't reset hardware (-11)
[ 106.846609] phy0: failed to restore operational channel after scan
[ 111.388603] ath5k phy0: noise floor calibration failed (2412MHz)
[ 112.002756] ath5k phy0: gain calibration timeout (2417MHz)
[ 112.002769] ath5k phy0: can't reset hardware (-11)
[ 112.002776] phy0: failed to set freq to 2417 MHz for scan
[ 112.618112] ath5k phy0: gain calibration timeout (2422MHz)
[ 112.618123] ath5k phy0: can't reset hardware (-11)
[ 112.618129] phy0: failed to set freq to 2422 MHz for scan
[ 113.234943] ath5k phy0: gain calibration timeout (2427MHz)
[ 113.234957] ath5k phy0: can't reset hardware (-11)
[ 113.234965] phy0: failed to set freq to 2427 MHz for scan
[ 113.855231] ath5k phy0: gain calibration timeout (2432MHz)
[ 113.855242] ath5k phy0: can't reset hardware (-11)
[ 113.855248] phy0: failed to set freq to 2432 MHz for scan
Happened on boot, and card stopped working.
Only a reboot helped.
When transferring large amounts of data from/to desktop pc,
assotiation with ap is dropped often which results is minute/two of no wireless
activety and this:
[ 1522.872096] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 1
[ 1523.072094] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 2
[ 1523.268098] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 3
[ 1523.477204] wlan0: direct probe to AP 00:1b:9e:d8:77:02 timed out
[ 1524.569452] wlan0: authenticate with AP 00:1b:9e:d8:77:02
[ 1524.571157] wlan0: authenticated
[ 1524.571179] wlan0: associate with AP 00:1b:9e:d8:77:02
[ 1524.574284] wlan0: RX ReassocResp from 00:1b:9e:d8:77:02 (capab=0x411 status=0 aid=1)
Also when downloading from AP (from desktop) I see this:
ath5k phy0: unsupported jumbo
Best regards,
Maxim Levitsky
next reply other threads:[~2008-11-21 19:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-21 19:58 Maxim Levitsky [this message]
2008-11-21 20:17 ` [ath5k-devel] Bugs in ath5k on aspire one (AR2425) Alan Jenkins
2008-11-21 20:34 ` Bob Copeland
2008-11-21 20:34 ` Maxim Levitsky
2008-12-12 19:40 ` Maxim Levitsky
2008-12-12 19:49 ` [ath5k-devel] " Bob Copeland
2008-12-12 19:57 ` Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=492712D9.7080004@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=ath5k-devel@lists.ath5k.org \
--cc=linux-wireless@vger.kernel.org \
--cc=me@bobcopeland.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.