All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jyrki Niskala <jyrki.n@telia.com>
To: linux-dvb <linux-dvb@linuxtv.org>
Subject: [linux-dvb] Can't get signal lock with Hauppauge Nova TD-500
Date: Wed, 26 Nov 2008 13:42:05 +0100	[thread overview]
Message-ID: <492D441D.1050108@telia.com> (raw)

Hello

I'm stucked here with a problem with a new Hauppauge card called Nova 
TD-500.
When tuning, I got lock on 4 of 5 muxes.  The fifth, non working mux, is 
at 778 MHz.
It's same behaviour on both tuners, with tzap or MythTV,  with or 
without lna option.
I have also tried with another computer with same result.
The signal is not a problem. I have 3 other dvb-t cards up and running 
for the moment...
All muxes are from 538 MHz to 778 MHz (64 QAM, 8 MHz bandwith, 8k 
transmission mode)

Some more information/dump ...

lsusb gives:
Bus 002 Device 002: ID 2040:8400 Hauppauge
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x2040 Hauppauge
  idProduct          0x8400
  bcdDevice            1.00
  iManufacturer           1 Hauppauge
  iProduct                2 WinTV Nova-DT
  iSerial                 3 4031669132
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

a good tzap gives...

DiB0070: Tuning for Band: 2 (754000 kHz)
DiB0070: HFDIV code: 1
DiB0070: VCO = 1
DiB0070: VCOF in kHz: 6032000 ((4*754000) << 1))
DiB0070: REFDIV: 1, FREF: 12000
DiB0070: FBDIV: 125, Rest: 43520
DiB0070: Num: -22016, Den: 255, SD: 1
DiB0070: CAPTRIM=64; ADC = 33 (ADC) & 58mV
DiB0070: CAPTRIM=64 is closer to target (367/3000)
DiB0070: CAPTRIM=96; ADC = 989 (ADC) & 1738mV
DiB0070: CAPTRIM=80; ADC = 989 (ADC) & 1738mV
DiB0070: CAPTRIM=72; ADC = 251 (ADC) & 441mV
DiB0070: CAPTRIM=72 is closer to target (149/367)
DiB0070: CAPTRIM=76; ADC = 687 (ADC) & 1207mV
DiB0070: CAPTRIM=74; ADC = 366 (ADC) & 643mV
DiB0070: CAPTRIM=74 is closer to target (34/149)
DiB0070: CAPTRIM=75; ADC = 464 (ADC) & 815mV
DiB7000P: SPLIT df392800: 87
DiB7000P: using updated timf
DiB7000P: updated timf_frequency: 20451948 (default: 20452225)
DiB7000P: relative position of the Spur: 2000k (RF: 754000k, XTAL: 12000k)
DiB7000P: PALF COEF: 0 re: 25 im: 124
DiB7000P: PALF COEF: 1 re: -103 im: 43
DiB7000P: PALF COEF: 2 re: -52 im: -79
DiB7000P: PALF COEF: 3 re: 54 im: -53
DiB7000P: PALF COEF: 4 re: 45 im: 30
DiB7000P: PALF COEF: 5 re: -11 im: 28
DiB7000P: PALF COEF: 6 re: -5 im: 0
DiB7000P: PALF COEF: 7 re: 0 im: 19
DiB7000P: using updated timf
DiB7000P: setting output mode for demod df392800 to 5

and a failed tzap (no lock)

DiB0070: Tuning for Band: 2 (778000 kHz)
DiB0070: HFDIV code: 1
DiB0070: VCO = 1
DiB0070: VCOF in kHz: 6224000 ((4*778000) << 1))
DiB0070: REFDIV: 1, FREF: 12000
DiB0070: FBDIV: 129, Rest: 43520
DiB0070: Num: -22016, Den: 255, SD: 1
DiB0070: CAPTRIM=64; ADC = 988 (ADC) & 1736mV
DiB0070: CAPTRIM=64 is closer to target (588/3000)
DiB0070: CAPTRIM=32; ADC = 34 (ADC) & 59mV
DiB0070: CAPTRIM=32 is closer to target (366/588)
DiB0070: CAPTRIM=48; ADC = 34 (ADC) & 59mV
DiB0070: CAPTRIM=56; ADC = 204 (ADC) & 358mV
DiB0070: CAPTRIM=56 is closer to target (196/366)
DiB0070: CAPTRIM=60; ADC = 441 (ADC) & 775mV
DiB0070: CAPTRIM=60 is closer to target (41/196)
DiB0070: CAPTRIM=58; ADC = 282 (ADC) & 495mV
DiB0070: CAPTRIM=59; ADC = 336 (ADC) & 590mV
DiB7000P: SPLIT df392800: 128
DiB7000P: using updated timf
DiB7000P: relative position of the Spur: 2000k (RF: 778000k, XTAL: 12000k)
DiB7000P: PALF COEF: 0 re: 25 im: 124
DiB7000P: PALF COEF: 1 re: -103 im: 43
DiB7000P: PALF COEF: 2 re: -52 im: -79
DiB7000P: PALF COEF: 3 re: 54 im: -53
DiB7000P: PALF COEF: 4 re: 45 im: 30
DiB7000P: PALF COEF: 5 re: -11 im: 28
DiB7000P: PALF COEF: 6 re: -5 im: 0
DiB7000P: PALF COEF: 7 re: 0 im: 19
DiB7000P: using updated timf
DiB7000P: setting output mode for demod df392800 to 5

Best regards
/ Jyrki


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-11-26 12:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-26 12:42 Jyrki Niskala [this message]
2008-12-20  7:20 ` [linux-dvb] Can't get signal lock with Hauppauge Nova TD-500 Jyrki Niskala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=492D441D.1050108@telia.com \
    --to=jyrki.n@telia.com \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.