From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tamas Selmeci Date: Wed, 26 Nov 2008 16:38:03 +0100 Subject: [ath9k-devel] 2.6.28-rc6: still can't set up AP mode In-Reply-To: <492C6DF1.90505@gmail.com> References: <492C6DF1.90505@gmail.com> Message-ID: <492D6D5B.6050702@dension.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hello all! Lars Hardy wrote: > Im trying the same ting, AP mode with ath9k. > Im not an expert, but I have it working. > You could try to add this to your hostapd.conf: [...] > 2. I cannot see that you have set any channel number, so add > channel=6 or an other number to your config. That's it, after setting channel=9 in hostapd.conf the AP mode works, I can connect to the newly established AP. :) Best regards, -- Tamas Selmeci