From: Peter Griffin <pgriffin@mpc-data.co.uk>
To: linux-sh@vger.kernel.org
Subject: [PATCH 2 / 3] sh: SH7201, board support
Date: Fri, 28 Nov 2008 12:31:16 +0000 [thread overview]
Message-ID: <492FE494.50100@mpc-data.co.uk> (raw)
From: Peter Griffin <pgriffin@mpc-data.co.uk>
sh: SH7201, board support
This patch adds RSK+ 7201 board support.
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
---
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -126,6 +126,10 @@ config SH_RTS7751R2D
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
+config SH_RSK7201
+ bool "RSK7201"
+ depends on CPU_SUBTYPE_SH7201
+
config SH_RSK7203
bool "RSK7203"
select GENERIC_GPIO
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index d9efa39..ce4d4d4 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o
obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7201) += board-rsk7201.o
obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o
obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
obj-$(CONFIG_SH_SHMIN) += board-shmin.o
diff --git a/arch/sh/boards/board-rsk7201.c b/arch/sh/boards/board-rsk7201.c
new file mode 100644
index 0000000..47a843d
--- /dev/null
+++ b/arch/sh/boards/board-rsk7201.c
@@ -0,0 +1,106 @@
+/*
+ * Renesas Technology Europe RSK+ 7201 Support.
+ *
+ * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7201_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x001c0000,
+ }, {
+ .name = "Flash_FS",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .start = 0x20000000,
+ .end = 0x20400000,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7201_flash_map = {
+ .name = "RSK+ Flash",
+ .size = 0x400000,
+ .bankwidth = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+ int nr_parts = 0;
+
+ simple_map_init(&rsk7201_flash_map);
+ flash_mtd = do_map_probe("cfi_probe", &rsk7201_flash_map);
+ nr_parts = parse_mtd_partitions(flash_mtd, probes,
+ &parsed_partitions, 0);
+ /* If there is no partition table, used the hard coded table */
+ if (nr_parts <= 0) {
+ flash_data.parts = rsk7201_partitions;
+ flash_data.nr_parts = ARRAY_SIZE(rsk7201_partitions);
+ } else {
+ flash_data.nr_parts = nr_parts;
+ flash_data.parts = parsed_partitions;
+ }
+}
+
+
+static struct platform_device *rsk7201_devices[] __initdata = {
+ &flash_device,
+};
+
+static int __init rsk7201_devices_setup(void)
+{
+ set_mtd_partitions();
+ return platform_add_devices(rsk7201_devices,
+ ARRAY_SIZE(rsk7201_devices));
+}
+device_initcall(rsk7201_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7201 __initmv = {
+ .mv_name = "RSK+7201",
+};
reply other threads:[~2008-11-28 12:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=492FE494.50100@mpc-data.co.uk \
--to=pgriffin@mpc-data.co.uk \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.