[patch 10/24] perfmon: PMU mapping

[eranian@googlemail.com]

This patch adds PMU resource description management functions.
Perfmon exports a logical view of the PMU with uniform register
names across all architectures. Each logical register is then
mapped onto an actual PMU register via a mapping table. Such table
exists for each PMU model.

PMU description tables are hardcoded into the kernel and one
is selected during boot.

Signed-off-by: Stephane Eranian <eranian@gmail.com>
--

Index: o3/perfmon/perfmon_pmu.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ o3/perfmon/perfmon_pmu.c	2008-11-25 18:58:26.000000000 +0100
@@ -0,0 +1,265 @@
+/*
+ * perfmon_pmu.c: perfmon2 PMU configuration management
+ *
+ * This file implements the perfmon2 interface which
+ * provides access to the hardware performance counters
+ * of the host processor.
+ *
+ * The initial version of perfmon.c was written by
+ * Ganesh Venkitachalam, IBM Corp.
+ *
+ * Then it was modified for perfmon-1.x by Stephane Eranian and
+ * David Mosberger, Hewlett Packard Co.
+ *
+ * Version Perfmon-2.x is a complete rewrite of perfmon-1.x
+ * by Stephane Eranian, Hewlett Packard Co.
+ *
+ * Copyright (c) 1999-2006 Hewlett-Packard Development Company, L.P.
+ * Contributed by Stephane Eranian <eranian@hpl.hp.com>
+ *                David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * More information about perfmon available at:
+ * 	http://perfmon2.sf.net
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+#include <linux/module.h>
+#include <linux/perfmon_kern.h>
+#include "perfmon_priv.h"
+
+#ifndef CONFIG_MODULE_UNLOAD
+#define module_refcount(n)	1
+#endif
+
+static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pfm_pmu_conf_lock);
+
+static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pfm_pmu_acq_lock);
+static u32 pfm_pmu_acquired;
+
+/*
+ * perfmon core must acces PMU information ONLY through pfm_pmu_conf
+ * if pfm_pmu_conf is NULL, then no description is registered
+ */
+struct pfm_pmu_config	*pfm_pmu_conf;
+EXPORT_SYMBOL(pfm_pmu_conf);
+
+/**
+ * pfm_pmu_regdesc_init -- initialize regdesc structure from PMU table
+ * @regs: the regdesc structure to initialize
+ * @excl_type: the register type(s) to exclude from this regdesc
+ * @unvail_pmcs: unavailable PMC registers
+ * @unavail_pmds: unavailable PMD registers
+ */
+static void pfm_pmu_regdesc_init(struct pfm_regdesc *regs, int excl_type,
+				 u64 *unavail_pmcs, u64 *unavail_pmds)
+{
+	struct pfm_regmap_desc *d;
+	u16 n, n2, n_counters, i;
+	int max1, max2, max3;
+
+	/*
+	 * compute the number of implemented PMC from the
+	 * description table
+	 */
+	n = 0;
+	max1 = max2 = -1;
+	d = pfm_pmu_conf->pmc_desc;
+	for (i = 0; i < pfm_pmu_conf->num_pmc_entries;  i++, d++) {
+		if (!(d->type & PFM_REG_I))
+			continue;
+
+		if (pfm_arch_bv_test_bit(i, unavail_pmcs))
+			continue;
+
+		if (d->type & excl_type)
+			continue;
+
+		pfm_arch_bv_set_bit(i, regs->pmcs);
+
+		max1 = i;
+		n++;
+	}
+
+	regs->max_pmc = max1 + 1;
+	regs->num_pmcs = n;
+
+	n = n_counters = n2 = 0;
+	max1 = max2 = max3 = -1;
+	d = pfm_pmu_conf->pmd_desc;
+	for (i = 0; i < pfm_pmu_conf->num_pmd_entries;  i++, d++) {
+		if (!(d->type & PFM_REG_I))
+			continue;
+
+		if (pfm_arch_bv_test_bit(i, unavail_pmds))
+			continue;
+
+		if (d->type & excl_type)
+			continue;
+
+		pfm_arch_bv_set_bit(i, regs->pmds);
+		max1 = i;
+		n++;
+
+		/*
+		 * read-write registers
+		 */
+		if (!(d->type & PFM_REG_RO)) {
+			pfm_arch_bv_set_bit(i, regs->rw_pmds);
+			max3 = i;
+			n2++;
+		}
+
+		/*
+		 * counter registers
+		 */
+		if (d->type & PFM_REG_C64) {
+			pfm_arch_bv_set_bit(i, regs->cnt_pmds);
+			n_counters++;
+		}
+
+		/*
+		 * PMD with intr capabilities
+		 */
+		if (d->type & PFM_REG_INTR) {
+			pfm_arch_bv_set_bit(i, regs->intr_pmds);
+			max2 = i;
+		}
+	}
+
+	regs->max_pmd = max1 + 1;
+	regs->max_intr_pmd  = max2 + 1;
+
+	regs->num_counters = n_counters;
+	regs->num_pmds = n;
+	regs->max_rw_pmd = max3 + 1;
+	regs->num_rw_pmd = n2;
+}
+
+int pfm_pmu_register(struct pfm_pmu_config *cfg)
+{
+	int ret = -EBUSY;
+
+	if (perfmon_disabled) {
+		PFM_INFO("perfmon disabled, cannot add PMU description");
+		return -ENOSYS;
+	}
+
+	spin_lock(&pfm_pmu_conf_lock);
+
+	if (pfm_pmu_conf)
+		goto unlock;
+
+	pfm_pmu_conf = cfg;
+	pfm_pmu_conf->ovfl_mask = (1ULL << cfg->counter_width) - 1;
+
+unlock:
+	spin_unlock(&pfm_pmu_conf_lock);
+
+	if (ret)
+		PFM_INFO("register %s PMU error %d", cfg->pmu_name, ret);
+	else
+		PFM_INFO("%s PMU installed", cfg->pmu_name);
+	return ret;
+}
+
+/*
+ * acquire PMU resource from lower-level PMU register allocator
+ * (currently perfctr-watchdog.c)
+ *
+ * acquisition is done when the first context is created (and not
+ * when it is loaded). We grab all that is defined in the description
+ * module and then we make adjustments at the arch-specific level.
+ *
+ * The PMU resource is released when the last perfmon context is
+ * destroyed.
+ *
+ * interrupts are not masked
+ */
+int pfm_pmu_acquire(struct pfm_context *ctx)
+{
+	u64 unavail_pmcs[PFM_PMC_BV];
+	u64 unavail_pmds[PFM_PMD_BV];
+	int ret = 0;
+
+	spin_lock(&pfm_pmu_acq_lock);
+
+	PFM_DBG("pmu_acquired=%d", pfm_pmu_acquired);
+
+	pfm_pmu_acquired++;
+
+	if (pfm_pmu_acquired == 1) {
+
+		memset(unavail_pmcs, 0, sizeof(unavail_pmcs));
+		memset(unavail_pmds, 0, sizeof(unavail_pmds));
+
+		ret = pfm_arch_pmu_acquire(unavail_pmcs, unavail_pmds);
+		if (ret) {
+			pfm_pmu_acquired--;
+		} else {
+			memset(&pfm_pmu_conf->regs_all, 0, sizeof(struct pfm_regdesc));
+
+			pfm_pmu_regdesc_init(&pfm_pmu_conf->regs_all, 0,
+				  	     unavail_pmcs,
+					     unavail_pmds);
+
+			PFM_DBG("regs_all.pmcs=0x%llx",
+				(unsigned long long)pfm_pmu_conf->regs_all.pmcs[0]);
+
+			/* available PMU ressources */
+			PFM_DBG("PMU acquired: %u PMCs, %u PMDs, %u counters",
+				pfm_pmu_conf->regs_all.num_pmcs,
+				pfm_pmu_conf->regs_all.num_pmds,
+				pfm_pmu_conf->regs_all.num_counters);
+		}
+	}
+	spin_unlock(&pfm_pmu_acq_lock);
+	/*
+	 * copy global regdesc to context (for future extensions)
+	 */
+	ctx->regs = pfm_pmu_conf->regs_all;
+
+	return ret;
+}
+
+/*
+ * release the PMU resource
+ *
+ * actual release happens when last context is destroyed
+ *
+ * interrupts are not masked
+ */
+void pfm_pmu_release(void)
+{
+	BUG_ON(irqs_disabled());
+
+	/*
+	 * we need to use a spinlock because release takes some time
+	 * and we may have a race with pfm_pmu_acquire()
+	 */
+	spin_lock(&pfm_pmu_acq_lock);
+
+	PFM_DBG("pmu_acquired=%d", pfm_pmu_acquired);
+
+	/*
+	 * we decouple test and decrement because if we had errors
+	 * in pfm_pmu_acquire(), we still come here on pfm_context_free()
+	 * but with pfm_pmu_acquire=0
+	 */
+	if (pfm_pmu_acquired > 0 && --pfm_pmu_acquired == 0) {
+		pfm_arch_pmu_release();
+		PFM_DBG("PMU released");
+	}
+	spin_unlock(&pfm_pmu_acq_lock);
+}
Index: o3/perfmon/perfmon_priv.h
===================================================================
--- o3.orig/perfmon/perfmon_priv.h	2008-11-25 18:56:15.000000000 +0100
+++ o3/perfmon/perfmon_priv.h	2008-11-25 18:58:04.000000000 +0100
@@ -52,6 +52,9 @@
 
 void pfm_free_context(struct pfm_context *ctx);
 
+int pfm_pmu_acquire(struct pfm_context *ctx);
+void pfm_pmu_release(void);
+
 void pfm_save_pmds(struct pfm_context *ctx);
 
 /*

--