From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <4933D6F3.6050807@gefanuc.com> Date: Mon, 01 Dec 2008 12:22:11 +0000 From: Martyn Welch MIME-Version: 1.0 To: Carlos Roberto Moratelli Subject: Re: MPC8313 and Marvell PHY 88e1112 References: <1227873994.3812.21.camel@parana> In-Reply-To: <1227873994.3812.21.camel@parana> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: Linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Carlos Roberto Moratelli wrote: > Hi, > Hi Carlos, > I am working in a custom board based on a mpc8313erdb and my Kernel > version is 2.6.24. This board has a Marvell PHY 88E1112 on TSEC2 > processor port. > > The problem is that the PHY is detected and configured, but no data can > be send or received. I am sure that dtb is fine. In another custom board > I have a 88e3015 on TSEC2 and it is working fine. > > Did someone work with this PHY? Does Compiling gianfar and Marvell > support on Kernel is enough? We have a board using a 8641d and Marvel 88E1111 PHY. I had problems getting the PHY to work correctly when using the Marvell PHY driver, however we were using the PHY as a standard PHY and found that the generic PHY driver worked just fine. Have you tried it without enabling the Marvell PHY driver so it uses the generic one? Martyn -- Martyn Welch MEng MPhil MIET (Principal Software Engineer) T:+44(0)1327322748 GE Fanuc Intelligent Platforms Ltd, |Registered in England and Wales Tove Valley Business Park, Towcester, |(3828642) at 100 Barbirolli Square, Northants, NN12 6PF, UK T:+44(0)1327359444 |Manchester,M2 3AB VAT:GB 729849476