From: Frederic Weisbecker <fweisbec@gmail.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>,
Tim Bird <tim.bird@am.sony.com>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Linux Kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/2] tracing/function-graph-tracer: improve duration output
Date: Wed, 03 Dec 2008 02:32:12 +0100 [thread overview]
Message-ID: <4935E19C.3090501@gmail.com> (raw)
Impact: better output of duration for long calls
The old duration output didn't exceeded 9999.999 us to fit the column
and the nanosecs were always 3 numbers. As Ingo suggested, it's better
to have the whole microseconds elapsed time and shift the nanosecs precision
if needed to fit the maximum 7 numbers. And usec need more number, the case
should be rare and important enough to break a bit the column alignment to
show it.
So, depending of the duration value, we now have these patterns:
u.nnn
uu.nnn
uuu.nnn
uuuu.nnn
uuuuu.nn
uuuuuu.n
uuuuuuuu.....
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 23e19d2..c66578f 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -232,11 +232,50 @@ trace_branch_is_leaf(struct trace_iterator *iter,
}
-static inline int
+static enum print_line_t
print_graph_duration(unsigned long long duration, struct trace_seq *s)
{
unsigned long nsecs_rem = do_div(duration, 1000);
- return trace_seq_printf(s, "%4llu.%3lu us | ", duration, nsecs_rem);
+ /* log10(ULONG_MAX) + '\0' */
+ char msecs_str[21];
+ char nsecs_str[5];
+ int ret, len;
+ int i;
+
+ sprintf(msecs_str, "%lu", (unsigned long) duration);
+
+ /* Print msecs */
+ ret = trace_seq_printf(s, msecs_str);
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+
+ len = strlen(msecs_str);
+
+ /* Print nsecs (we don't want to exceed 7 numbers) */
+ if (len < 7) {
+ snprintf(nsecs_str, 8 - len, "%03lu", nsecs_rem);
+ ret = trace_seq_printf(s, ".%s", nsecs_str);
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+ len += strlen(nsecs_str);
+ }
+
+ ret = trace_seq_printf(s, " us ");
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+
+ /* Print remaining spaces to fit the row's width */
+ for (i = len; i < 7; i++) {
+ ret = trace_seq_printf(s, " ");
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+ }
+
+ ret = trace_seq_printf(s, "| ");
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+ return TRACE_TYPE_HANDLED;
+
}
/* Signal a overhead of time execution to the output */
@@ -273,10 +312,6 @@ print_graph_entry_leaf(struct trace_iterator *iter,
call = &entry->graph_ent;
duration = graph_ret->rettime - graph_ret->calltime;
- /* Must not exceed 8 characters: 9999.999 us */
- if (duration > 10000000ULL)
- duration = 9999999ULL;
-
/* Overhead */
if (tracer_flags.val & TRACE_GRAPH_PRINT_OVERHEAD) {
ret = print_graph_overhead(duration, s);
@@ -286,7 +321,7 @@ print_graph_entry_leaf(struct trace_iterator *iter,
/* Duration */
ret = print_graph_duration(duration, s);
- if (!ret)
+ if (ret == TRACE_TYPE_PARTIAL_LINE)
return TRACE_TYPE_PARTIAL_LINE;
/* Function */
@@ -387,10 +422,6 @@ print_graph_return(struct ftrace_graph_ret *trace, struct trace_seq *s,
int ret;
unsigned long long duration = trace->rettime - trace->calltime;
- /* Must not exceed 8 characters: xxxx.yyy us */
- if (duration > 10000000ULL)
- duration = 9999999ULL;
-
/* Pid */
if (verif_pid(s, ent->pid, cpu) == TRACE_TYPE_PARTIAL_LINE)
return TRACE_TYPE_PARTIAL_LINE;
@@ -422,7 +453,7 @@ print_graph_return(struct ftrace_graph_ret *trace, struct trace_seq *s,
/* Duration */
ret = print_graph_duration(duration, s);
- if (!ret)
+ if (ret == TRACE_TYPE_PARTIAL_LINE)
return TRACE_TYPE_PARTIAL_LINE;
/* Closing brace */
--
1.5.6.3
next reply other threads:[~2008-12-03 1:32 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-03 1:32 Frederic Weisbecker [this message]
2008-12-03 1:34 ` [PATCH 2/2] tracing/function-graph-tracer: improve duration output Frederic Weisbecker
2008-12-03 8:19 ` Ingo Molnar
2008-12-03 8:33 ` Ingo Molnar
2008-12-03 10:07 ` Frédéric Weisbecker
2008-12-03 10:21 ` Peter Zijlstra
2008-12-03 10:23 ` Frédéric Weisbecker
2008-12-03 10:27 ` Peter Zijlstra
2008-12-03 10:29 ` Frédéric Weisbecker
2008-12-03 11:52 ` Steven Rostedt
2008-12-03 13:11 ` Frédéric Weisbecker
2008-12-03 13:17 ` Peter Zijlstra
2008-12-03 13:21 ` Steven Rostedt
2008-12-03 15:44 ` Frédéric Weisbecker
2008-12-03 16:31 ` Steven Rostedt
2008-12-03 14:22 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4935E19C.3090501@gmail.com \
--to=fweisbec@gmail.com \
--cc=a.p.zijlstra@chello.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rostedt@goodmis.org \
--cc=tim.bird@am.sony.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.