From: Mark Jackson <mpfj@mimc.co.uk>
To: linux-kernel@vger.kernel.org, kay.sievers@vrfy.org
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Subject: Badness at mm/backing-dev.c:179
Date: Wed, 03 Dec 2008 12:07:45 +0000 [thread overview]
Message-ID: <49367691.5060007@mimc.co.uk> (raw)
The following commit causes a "Badness at mm/backing-dev.c:179":-
f1d0b063d993527754f062c589b73f125024d216 is first bad commit
commit f1d0b063d993527754f062c589b73f125024d216
Author: Kay Sievers <kay.sievers@vrfy.org>
Date: Tue Dec 2 10:31:50 2008 -0800
bdi: register sysfs bdi device only once per queue
<snip>
Tested-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Below is the extract from dmesg:-
physmap platform flash device: 00800000 at 00000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash.0":
0x00000000-0x00020000 : "u-boot"
0x00020000-0x007e0000 : "root"
------------[ cut here ]------------
Badness at mm/backing-dev.c:179
PC is at bdi_register+0xe/0x44
LR is at bdi_register_dev+0x16/0x20
pc : [<9003f07a>] lr : [<9003f0c6>] Not tainted
sp : 91c19ccc r12: 91c5409c r11: 00000000
r10: 901c56c8 r9 : 0000001f r8 : 00000001
r7 : 91c19cd0 r6 : 91c5409c r5 : 91d0bc00 r4 : 00000000
r3 : 91e9b200 r2 : 901fd3fc r1 : 00000001 r0 : 00000004
Flags: qvNzc
Mode bits: hjmde....g
CPU Mode: Supervisor
Process: swapper [1] (task: 91c16000 thread: 91c18000)
Call trace:
[<9003f0c6>] bdi_register_dev+0x16/0x20
[<900d7cc4>] add_disk+0x88/0xb0
[<90100148>] add_mtd_blktrans_dev+0x178/0x188
[<901004ea>] mtdblock_add_mtd+0x36/0x3c
[<900ffec4>] blktrans_notify_add+0x1a/0x3a
[<900fe16c>] add_mtd_device+0x60/0xa0
[<900fef2e>] add_mtd_partitions+0x37e/0x3a4
[<90105614>] physmap_flash_probe+0x1ec/0x21c
[<900f9eb4>] platform_drv_probe+0x10/0x12
[<900f9680>] driver_probe_device+0x84/0xf0
[<900f9726>] __driver_attach+0x3a/0x50
[<900f904a>] bus_for_each_dev+0x2e/0x4c
[<900f9566>] driver_attach+0x12/0x14
[<900f9324>] bus_add_driver+0x6c/0x170
[<900f9860>] driver_register+0x58/0xb0
[<900fa0b6>] platform_driver_register+0x56/0x5c
[<9000adca>] physmap_init+0xa/0x10
[<900146da>] do_one_initcall+0x36/0x10c
[<90000380>] kernel_init+0x48/0x94
[<9001fca0>] do_exit+0x0/0x49c
0x007e0000-0x007f0000 : "splash"
------------[ cut here ]------------
Badness at mm/backing-dev.c:179
PC is at bdi_register+0xe/0x44
LR is at bdi_register_dev+0x16/0x20
pc : [<9003f07a>] lr : [<9003f0c6>] Tainted: G W
sp : 91c19ccc r12: 91c5409c r11: 00000000
r10: 901c56c8 r9 : 0000001f r8 : 00000002
r7 : 91c19cd0 r6 : 91c5409c r5 : 91d0bc00 r4 : 00000000
r3 : 91e9b800 r2 : 901fd414 r1 : 00000002 r0 : 00000004
Flags: qvNzc
Mode bits: hjmde....g
CPU Mode: Supervisor
Process: swapper [1] (task: 91c16000 thread: 91c18000)
Call trace:
[<9003f0c6>] bdi_register_dev+0x16/0x20
[<900d7cc4>] add_disk+0x88/0xb0
[<90100148>] add_mtd_blktrans_dev+0x178/0x188
[<901004ea>] mtdblock_add_mtd+0x36/0x3c
[<900ffec4>] blktrans_notify_add+0x1a/0x3a
[<900fe16c>] add_mtd_device+0x60/0xa0
[<900fef2e>] add_mtd_partitions+0x37e/0x3a4
[<90105614>] physmap_flash_probe+0x1ec/0x21c
[<900f9eb4>] platform_drv_probe+0x10/0x12
[<900f9680>] driver_probe_device+0x84/0xf0
[<900f9726>] __driver_attach+0x3a/0x50
[<900f904a>] bus_for_each_dev+0x2e/0x4c
[<900f9566>] driver_attach+0x12/0x14
[<900f9324>] bus_add_driver+0x6c/0x170
[<900f9860>] driver_register+0x58/0xb0
[<900fa0b6>] platform_driver_register+0x56/0x5c
[<9000adca>] physmap_init+0xa/0x10
[<900146da>] do_one_initcall+0x36/0x10c
[<90000380>] kernel_init+0x48/0x94
[<9001fca0>] do_exit+0x0/0x49c
0x007f0000-0x00800000 : "env"
------------[ cut here ]------------
Badness at mm/backing-dev.c:179
PC is at bdi_register+0xe/0x44
LR is at bdi_register_dev+0x16/0x20
pc : [<9003f07a>] lr : [<9003f0c6>] Tainted: G W
sp : 91c19ccc r12: 91c5409c r11: 00000000
r10: 901c56c8 r9 : 0000001f r8 : 00000003
r7 : 91c19cd0 r6 : 91c5409c r5 : 91d0bc00 r4 : 00000000
r3 : 91e9be00 r2 : 901fd42c r1 : 00000003 r0 : 00000004
Flags: qvNzc
Mode bits: hjmde....g
CPU Mode: Supervisor
Process: swapper [1] (task: 91c16000 thread: 91c18000)
Call trace:
[<9003f0c6>] bdi_register_dev+0x16/0x20
[<900d7cc4>] add_disk+0x88/0xb0
[<90100148>] add_mtd_blktrans_dev+0x178/0x188
[<901004ea>] mtdblock_add_mtd+0x36/0x3c
[<900ffec4>] blktrans_notify_add+0x1a/0x3a
[<900fe16c>] add_mtd_device+0x60/0xa0
[<900fef2e>] add_mtd_partitions+0x37e/0x3a4
[<90105614>] physmap_flash_probe+0x1ec/0x21c
[<900f9eb4>] platform_drv_probe+0x10/0x12
[<900f9680>] driver_probe_device+0x84/0xf0
[<900f9726>] __driver_attach+0x3a/0x50
[<900f904a>] bus_for_each_dev+0x2e/0x4c
[<900f9566>] driver_attach+0x12/0x14
[<900f9324>] bus_add_driver+0x6c/0x170
[<900f9860>] driver_register+0x58/0xb0
[<900fa0b6>] platform_driver_register+0x56/0x5c
[<9000adca>] physmap_init+0xa/0x10
[<900146da>] do_one_initcall+0x36/0x10c
[<90000380>] kernel_init+0x48/0x94
[<9001fca0>] do_exit+0x0/0x49c
physmap platform flash device: 00800000 at 08000000
physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Using physmap partition information
Creating 1 MTD partitions on "physmap-flash.1":
0x00000000-0x00800000 : "data"
------------[ cut here ]------------
Badness at mm/backing-dev.c:179
PC is at bdi_register+0xe/0x44
LR is at bdi_register_dev+0x16/0x20
pc : [<9003f07a>] lr : [<9003f0c6>] Tainted: G W
sp : 91c19ccc r12: 91c5409c r11: 00000000
r10: 901c56c8 r9 : 0000001f r8 : 00000004
r7 : 91c19cd0 r6 : 91c5409c r5 : 91d0bc00 r4 : 00000000
r3 : 91cb9400 r2 : 901fd444 r1 : 00000000 r0 : 00000001
Flags: qvNzc
Mode bits: hjmde....g
CPU Mode: Supervisor
Process: swapper [1] (task: 91c16000 thread: 91c18000)
Call trace:
[<9003f0c6>] bdi_register_dev+0x16/0x20
[<900d7cc4>] add_disk+0x88/0xb0
[<90100148>] add_mtd_blktrans_dev+0x178/0x188
[<901004ea>] mtdblock_add_mtd+0x36/0x3c
[<900ffec4>] blktrans_notify_add+0x1a/0x3a
[<900fe16c>] add_mtd_device+0x60/0xa0
[<900fef2e>] add_mtd_partitions+0x37e/0x3a4
[<90105614>] physmap_flash_probe+0x1ec/0x21c
[<900f9eb4>] platform_drv_probe+0x10/0x12
[<900f9680>] driver_probe_device+0x84/0xf0
[<900f9726>] __driver_attach+0x3a/0x50
[<900f904a>] bus_for_each_dev+0x2e/0x4c
[<900f9566>] driver_attach+0x12/0x14
[<900f9324>] bus_add_driver+0x6c/0x170
[<900f9860>] driver_register+0x58/0xb0
[<900fa0b6>] platform_driver_register+0x56/0x5c
[<9000adca>] physmap_init+0xa/0x10
[<900146da>] do_one_initcall+0x36/0x10c
[<90000380>] kernel_init+0x48/0x94
[<9001fca0>] do_exit+0x0/0x49c
Regards
Mark
next reply other threads:[~2008-12-03 12:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-03 12:07 Mark Jackson [this message]
2008-12-03 12:22 ` Badness at mm/backing-dev.c:179 Kay Sievers
2008-12-03 12:26 ` Mark Jackson
2008-12-03 19:06 ` Andrew Morton
2008-12-08 8:16 ` Geert Uytterhoeven
2008-12-08 12:42 ` Kay Sievers
2008-12-08 12:54 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49367691.5060007@mimc.co.uk \
--to=mpfj@mimc.co.uk \
--cc=haavard.skinnemoen@atmel.com \
--cc=kay.sievers@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.