From: Andre Schwarz <andre.schwarz@matrix-vision.de>
To: Timur Tabi <timur@freescale.com>
Cc: linuxppc-dev@ozlabs.org, afleming@freescale.com, netdev@vger.kernel.org
Subject: Re: "eth1: Could not attach to PHY" on MPC8349e-MITX
Date: Thu, 04 Dec 2008 18:41:54 +0100 [thread overview]
Message-ID: <49381662.2020302@matrix-vision.de> (raw)
In-Reply-To: <ed82fe3e0812040915i696e99bep75a37b0e38154415@mail.gmail.com>
Timur,
is it possible that the PHY adress doesn't match the one specified in
the dts ?
regards,
Andre
Timur Tabi schrieb:
> The Freescale MPC8349e-MITX reference board has two TSECs, the second
> of which (eth1) is attached to a Vitesse 7385 5-port switch.
>
> Using the latest U-Boot, Kernel, and device tree, I cannot bring up
> eth1. When I try, I get this message:
>
> [root@tintin root]# ifconfig eth1 up
> 0:01 not found
> eth1: Could not attach to PHY
> SIOCSIFFLAGS: No such device
>
> Unfortunately, I don't even know what this means.
>
> I believe my network configuration is correct. Here's what ifconfig
> says about eth1:
>
> eth1 Link encap:Ethernet HWaddr 00:E0:0C:00:8C:02
> inet addr:192.168.2.141 Bcast:192.168.255.255 Mask:255.255.0.0
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> Base address:0x4000
>
> eth1 does work in U-boot, so I know it can be made to work (and I know
> the 7385's firmware is uploaded), I just don't know what needs to be
> done in Linux.
>
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
next prev parent reply other threads:[~2008-12-04 17:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-04 17:15 "eth1: Could not attach to PHY" on MPC8349e-MITX Timur Tabi
2008-12-04 17:41 ` Andre Schwarz [this message]
2008-12-04 17:47 ` Timur Tabi
2008-12-04 17:47 ` Timur Tabi
2008-12-04 17:56 ` Anton Vorontsov
2008-12-04 17:56 ` Anton Vorontsov
2008-12-04 17:56 ` Andre Schwarz
2008-12-04 17:52 ` [PATCH] powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigs Anton Vorontsov
2008-12-04 17:52 ` Anton Vorontsov
2008-12-04 19:18 ` Timur Tabi
2008-12-04 19:18 ` Timur Tabi
2008-12-05 0:48 ` Kumar Gala
2008-12-05 0:48 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49381662.2020302@matrix-vision.de \
--to=andre.schwarz@matrix-vision.de \
--cc=afleming@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.