Re: 3ware 9650SE-16ML w/XFS & RAID6: first impressions

[Maurice Hilarius <maurice@harddata.com>]

Hans-Peter Jansen wrote:
> Am Mittwoch, 3. Dezember 2008 schrieb Justin Piszcz:
>   
>> For read speed, it appears that there is some overhead (2x). With
>> software raid6 I used to get 1.0Gbyte/sec read speed, or at least
>> 800MiB/s across the entire array, now I only get 538MiB/s across the
>> entire array. However, write speed is improved. Before it was in the mid
>> 400s for RAID6 and peaking at 502MiB/s at the outer edge of the drives.
>> For the write speed now, its around 620-640MiB/s at the end of the array
>> and 580-620MiB/s going in further and 502MiB/s across the entire array. I
>> always heard all of the horror stories with 3ware cards, it turns out
>> they're not so bad after all.
>>     
>
> Hustin, if you're after speed, AND sane support, you may consider trying 
> Areca products. I'm biased, since 3ware fed me up completely, when it came 
> to a single drive failure in a RAID 5 setup: the support only provides an 
> ugly web interface: when posting my problem, they replied with:
>
>   
Nice Areca advertisement.

Of course you can demonstrate how their tech support responded, to a
similar DISK failure, with a better suggestion, and more promptly?

Buried for biased and irrelevant.


-- 
With our best regards,

//Maurice W. Hilarius         Telephone: 01-780-456-9771/
/Hard Data Ltd.                FAX:          01-780-456-9772/
/11060 - 166 Avenue         email:maurice@harddata.com/
/Edmonton, AB, Canada         http://www.harddata.com//
/     T5X 1Y3/
/


[[HTML alternate version deleted]]

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs