From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Tue, 09 Dec 2008 19:00:25 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon: Fix various typos Message-Id: <493EC049.9040503@hhs.nl> List-Id: References: <20081209163734.683475cf@hyperion.delvare> In-Reply-To: <20081209163734.683475cf@hyperion.delvare> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Jean Delvare wrote: > Signed-off-by: Jean Delvare > --- > Documentation/hwmon/lm85 | 2 +- > drivers/hwmon/it87.c | 2 +- > drivers/hwmon/w83627ehf.c | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) > Looks good to me :) Regards, Hans > --- linux-2.6.28-rc7.orig/drivers/hwmon/w83627ehf.c 2008-12-05 23:58:15.000000000 +0100 > +++ linux-2.6.28-rc7/drivers/hwmon/w83627ehf.c 2008-12-08 10:48:34.000000000 +0100 > @@ -503,7 +503,7 @@ static struct w83627ehf_data *w83627ehf_ > } > > for (i = 0; i < 4; i++) { > - /* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ > + /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ > if (i != 1) { > pwmcfg = w83627ehf_read_value(data, > W83627EHF_REG_PWM_ENABLE[i]); > --- linux-2.6.28-rc7.orig/Documentation/hwmon/lm85 2008-10-24 09:27:31.000000000 +0200 > +++ linux-2.6.28-rc7/Documentation/hwmon/lm85 2008-12-08 10:48:34.000000000 +0100 > @@ -164,7 +164,7 @@ configured individually according to the > temperature. (PWM value from 0 to 255) > > * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature > - the bahaviour of fans. Write 1 to let fans spinning at > + the behaviour of fans. Write 1 to let fans spinning at > pwm#_auto_pwm_min or write 0 to let them off. > > NOTE: It has been reported that there is a bug in the LM85 that causes the flag > --- linux-2.6.28-rc7.orig/drivers/hwmon/it87.c 2008-12-05 23:58:15.000000000 +0100 > +++ linux-2.6.28-rc7/drivers/hwmon/it87.c 2008-12-08 10:48:49.000000000 +0100 > @@ -1386,7 +1386,7 @@ static void __devinit it87_init_device(s > it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127); > } > > - /* Check if temperature channnels are reset manually or by some reason */ > + /* Check if temperature channels are reset manually or by some reason */ > tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE); > if ((tmp & 0x3f) = 0) { > /* Temp1,Temp3=thermistor; Temp2=thermal diode */ > > _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors