PATCH: mvsas: increase port type detection delay to suit Seagate's 10k6 drive ST3450856SS 0003

[Reinhard Nissl <rnissl@gmx.de>]

[-- Attachment #1: Type: text/plain, Size: 418 bytes --]

I increased the delay step by step until loading of mvsas
reliably detected the drive 200 times in sequence. A much better
approach would be to monitor the hardware for some flag which
indicates that port detection has finished, but I do not have any
hardware documentation.

BTW: patch is against
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.27.y.git

Signed-off-by: Reinhard Nissl <rnissl@gmx.de>


[-- Attachment #2: mvsas.diff --]
[-- Type: text/x-patch, Size: 450 bytes --]

diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index 1dd70d7..23e5a87 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -2959,7 +2959,7 @@ static int __devinit mvs_hw_init(struct mvs_info *mvi)
 
 	/* enable auto port detection */
 	mw32(GBL_PORT_TYPE, MODE_AUTO_DET_EN);
-	msleep(100);
+	msleep(1100);
 	/* init and reset phys */
 	for (i = 0; i < mvi->chip->n_phy; i++) {
 		u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);