From: frederic Rodo <f.rodo@til-technologies.fr>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot-v2][PATCH] imx27: nandboot with 2k pages
Date: Thu, 11 Dec 2008 14:14:41 +0100 [thread overview]
Message-ID: <49411241.9080807@til-technologies.fr> (raw)
Signed-off-by:Frederic Rodo <fred.rodo@gmail.com>
---
drivers/nand/nand_imx.c | 94
+++++++++++++++++++++++++++++------
include/asm-arm/arch-imx/imx-nand.h | 2 +-
2 files changed, 79 insertions(+), 17 deletions(-)
diff --git a/drivers/nand/nand_imx.c b/drivers/nand/nand_imx.c
index f7f50b0..3bf67de 100644
--- a/drivers/nand/nand_imx.c
+++ b/drivers/nand/nand_imx.c
@@ -1090,26 +1090,74 @@ static struct driver_d imx_nand_driver = {
static void __nand_boot_init nfc_addr(struct imx_nand_host *host, u32 offs)
{
- send_addr(host, offs & 0xff);
- send_addr(host, (offs >> 9) & 0xff);
- send_addr(host, (offs >> 17) & 0xff);
- send_addr(host, (offs >> 25) & 0xff);
+ if (!host->pagesize_2k) {
+ send_addr(host, offs & 0xff);
+ send_addr(host, (offs >> 9) & 0xff);
+ send_addr(host, (offs >> 17) & 0xff);
+ send_addr(host, (offs >> 25) & 0xff);
+ } else {
+ /* imx27 Nand flash controller can only read full 2k page */
+ send_addr(host, 0);
+ send_addr(host, 0);
+ send_addr(host, (offs >> 11) & 0xff);
+ send_addr(host, (offs >> 19) & 0xff);
+ /* FIXME: add another send_addr for nandflash > 1Gbit
+ * if (read electronic signature byte 5 > 1 Gbit)
+ * send_addr(host, (offs >> 28) & 0xff);
+ */
+
+ /* send read start command */
+ send_cmd(host, NAND_CMD_READSTART);
+ }
}
-static int __nand_boot_init block_is_bad(struct imx_nand_host *host,
u32 offs)
+static int __nand_boot_init block_is_bad(struct imx_nand_host *host,
u32 offs,
+ u32 pagesize)
{
- send_cmd(host, NAND_CMD_READOOB);
- nfc_addr(host, offs);
- send_read_page(host, 0, 1);
-
- return (readw(host->regs + SPARE_AREA0) & 0xff) == 0xff ? 0 : 1;
+ if (!host->pagesize_2k) {
+ send_cmd(host, NAND_CMD_READOOB);
+ nfc_addr(host, offs);
+ send_read_page(host, 0, 1);
+ if ((readw(host->regs + SPARE_AREA0) & 0xff) != 0xff)
+ return 1;
+ } else {
+ /* The AdvancedToolKit Mark the two first page of each block */
+ /* check first page */
+ send_cmd(host, NAND_CMD_READ0);
+ nfc_addr(host, offs);
+ send_read_page(host, 0, 1);
+ send_read_page(host, 1, 1);
+ send_read_page(host, 2, 1);
+ send_read_page(host, 3, 1);
+
+ if (readw(host->regs + NFC_ECC_STATUS_RESULT) & 0xa)
+ return 1;
+
+ if ((readw(host->regs + SPARE_AREA0 + 4) & 0xFF00) != 0xFF00)
+ return 1;
+
+ /* check second page */
+ send_cmd(host, NAND_CMD_READ0);
+ nfc_addr(host, offs + pagesize);
+ send_read_page(host, 0, 1);
+ send_read_page(host, 1, 1);
+ send_read_page(host, 2, 1);
+ send_read_page(host, 3, 1);
+
+ if (readw(host->regs + NFC_ECC_STATUS_RESULT) & 0xa)
+ return 1;
+
+ if ((readw(host->regs + SPARE_AREA0 + 4) & 0xFF00) != 0xFF00)
+ return 1;
+
+ }
+ return 0;
}
-void __nand_boot_init imx_nand_load_image(void *dest, int size, int
pagesize,
- int blocksize)
+void __nand_boot_init imx_nand_load_image(void *dest, int size, int
blocksize)
{
struct imx_nand_host host;
- u32 tmp, page, block;
+ u32 tmp, page, block, pagesize;
PCCR1 |= PCCR1_NFC_BAUDEN;
@@ -1117,6 +1165,10 @@ void __nand_boot_init imx_nand_load_image(void
*dest, int size, int pagesize,
case GPCR_BOOT_8BIT_NAND_2k:
case GPCR_BOOT_16BIT_NAND_2k:
host.pagesize_2k = 1;
+ pagesize = 2048;
+ break;
+ default:
+ pagesize = 512;
}
host.regs = (void __iomem *)IMX_NFC_BASE;
@@ -1134,14 +1186,19 @@ void __nand_boot_init imx_nand_load_image(void
*dest, int size, int pagesize,
/* Unlock Block Command for given address range */
writew(0x4, host.regs + NFC_WRPROT);
+ /* clear all operation */
+ writew(0x8000, host.regs + NFC_CONFIG1);
+
+ /* enable ECC, disable spare only and interrupt */
tmp = readw(host.regs + NFC_CONFIG1);
- tmp |= NFC_ECC_EN;
+ tmp |= NFC_ECC_EN | NFC_INT_MSK;
+ tmp &= ~ NFC_SP_EN;
writew(tmp, host.regs + NFC_CONFIG1);
block = page = 0;
while (1) {
- if (!block_is_bad(&host, block * blocksize)) {
+ if (!block_is_bad(&host, block * blocksize, pagesize)) {
page = 0;
while (page * pagesize < blocksize) {
debug("page: %d block: %d dest: %p src "
@@ -1154,8 +1211,13 @@ void __nand_boot_init imx_nand_load_image(void
*dest, int size, int pagesize,
nfc_addr(&host, block * blocksize +
page * pagesize);
send_read_page(&host, 0, 0);
+ if (host.pagesize_2k) {
+ send_read_page(&host, 1, 0);
+ send_read_page(&host, 2, 0);
+ send_read_page(&host, 3, 0);
+ }
page++;
- memcpy32(dest, host.regs, 512);
+ memcpy32(dest, host.regs, pagesize);
dest += pagesize;
size -= pagesize;
if (size <= 0)
diff --git a/include/asm-arm/arch-imx/imx-nand.h
b/include/asm-arm/arch-imx/imx-nand.h
index 5ebe0be..eca8fef 100644
--- a/include/asm-arm/arch-imx/imx-nand.h
+++ b/include/asm-arm/arch-imx/imx-nand.h
@@ -3,7 +3,7 @@
#include <linux/mtd/mtd.h>
-void imx_nand_load_image(void *dest, int size, int pagesize, int
blocksize);
+void imx_nand_load_image(void *dest, int size, int blocksize);
struct imx_nand_platform_data {
int width;
--
1.4.4.4
-------------------------------------------------------------------------
Les informations pr?c?dentes peuvent ?tre confidentielles ou privil?gi?es.
Si vous n'?tes pas le destinataire pr?vu de ce mail, veuillez en notifier
l'exp?diteur en r?pondant ? ce message puis supprimez-en toute trace
de vos syst?mes.
TIL Technologies
Parc du Golf, Bat 43
350 rue J.R Guilibert Gautier de la Lauzi?re
13856 AIX EN PROVENCE
Tel. : +33 4 42 37 11 77
-------------------------------------------------------------------------
next reply other threads:[~2008-12-11 13:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-11 13:14 frederic Rodo [this message]
2008-12-12 8:30 ` [U-Boot] [U-Boot-v2][PATCH] imx27: nandboot with 2k pages Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49411241.9080807@til-technologies.fr \
--to=f.rodo@til-technologies.fr \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.