From: pat-lkml <pat-lkml@erley.org>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: Re: Userspace tools: Roadmap?
Date: Thu, 11 Dec 2008 23:58:17 -0500 [thread overview]
Message-ID: <4941EF69.5040108@erley.org> (raw)
In-Reply-To: <1228780960.22164.162.camel@johannes.berg>
Attached is a newer 'better' version based off of how hostapd is
handling this. This patch adds an option, CONFIG_LIBNL20, which enables
LIBNL20 compatibility. I haven't ever been able to get iw to build with
libnl-1.0 or libnl-1.1 on my system, so I haven't been able to test
that, but it should work.
Signed-off-by: Pat Erley <pat-lkml@erley.org>
---
diff --git a/Makefile b/Makefile
index df59b51..a10f72f 100644
--- a/Makefile
+++ b/Makefile
@@ -10,14 +10,25 @@ MKDIR ?= mkdir -p
INSTALL ?= install
CC ?= "gcc"
-CFLAGS += -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
-fno-strict-aliasing -fno-common -Werror-implicit-function-declaration
`pkg-config --cflags libnl-1`
+CFLAGS += -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
-fno-strict-aliasing -fno-common -Werror-implicit-function-declaration
CFLAGS += -O2 -g
-LDFLAGS += `pkg-config --libs libnl-1`
-NLVERSION = 1.0
+NLVERSION = 2.0
OBJS = iw.o info.o phy.o interface.o station.o util.o mpath.o reg.o
mesh.o genl.o
ALL = iw
+ifeq ($(NLVERSION), 2.0)
+CFLAGS += `pkg-config --cflags libnl-2.0` -DCONFIG_LIBNL20
+LDFLAGS += `pkg-config --libs libnl-2.0`
+LIBS += -lnl -lnl-genl -lnl-nf -lnl-route
+NLTESTVERSION = 2.0
+else
+CFLAGS += `pkg-config --cflags libnl-1`
+LDFLAGS += `pkg-config --libs libnl-1.0`
+LIBS += -lnl
+NLTESTVERSION = 1
+endif
+
ifeq ($(V),1)
Q=
NQ=true
@@ -29,7 +40,7 @@ endif
all: version_check $(ALL)
version_check:
- @if ! pkg-config --atleast-version=$(NLVERSION) libnl-1; then echo
"You need at least libnl version $(NLVERSION)"; exit 1; fi
+ @if ! pkg-config --atleast-version=$(NLVERSION)
libnl-$(NLTESTVERSION); then echo "You need at least libnl version
$(NLVERSION)"; exit 1; fi
version.h: version.sh
@@ -42,7 +53,7 @@ version.h: version.sh
iw: $(OBJS)
@$(NQ) ' CC ' iw
- $(Q)$(CC) $(LDFLAGS) $(OBJS) -o iw
+ $(Q)$(CC) $(LDFLAGS) $(OBJS) $(LIBS) -o iw
check:
$(Q)$(MAKE) all CC="REAL_CC=$(CC) CHECK=\"sparse -Wall\" cgcc"
diff --git a/iw.c b/iw.c
index afae643..7038973 100644
--- a/iw.c
+++ b/iw.c
@@ -23,6 +23,13 @@
#include "iw.h"
#include "version.h"
+#ifdef CONFIG_LIBNL20
+/* libnl 2.0 compatibility code */
+#define nl_handle_alloc_cb nl_socket_alloc_cb
+#define nl_handle_alloc nl_socket_alloc
+#define nl_handle_destroy nl_socket_free
+#endif /* CONFIG_LIBNL20 */
+
static int debug = 0;
static int nl80211_init(struct nl80211_state *state)
@@ -40,9 +47,12 @@ static int nl80211_init(struct nl80211_state *state)
err = -ENOLINK;
goto out_handle_destroy;
}
-
+#ifdef CONFIG_LIBNL20
+ if (genl_ctrl_alloc_cache(state->nl_handle, &(state->nl_cache))) {
+#else
state->nl_cache = genl_ctrl_alloc_cache(state->nl_handle);
if (!state->nl_cache) {
+#endif
fprintf(stderr, "Failed to allocate generic netlink cache.\n");
err = -ENOMEM;
goto out_handle_destroy;
next prev parent reply other threads:[~2008-12-12 5:05 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-07 23:29 Userspace tools: Roadmap? Dan E
2008-12-08 7:02 ` Rami Rosen
2008-12-08 8:13 ` Johannes Berg
2008-12-08 23:18 ` Dan E
2008-12-08 23:26 ` Johannes Berg
2008-12-08 23:52 ` pat-lkml
2008-12-09 0:02 ` Johannes Berg
2008-12-09 0:08 ` pat-lkml
2008-12-12 4:58 ` pat-lkml [this message]
2008-12-12 16:24 ` Pavel Roskin
2008-12-12 21:58 ` Johannes Berg
2008-12-12 22:37 ` pat-lkml
2008-12-12 22:38 ` Johannes Berg
2008-12-12 23:36 ` pat-lkml
2008-12-12 23:42 ` pat-lkml
2008-12-12 23:50 ` Johannes Berg
2008-12-12 23:48 ` pat-lkml
2008-12-13 0:05 ` Johannes Berg
2008-12-13 0:10 ` pat-lkml
2008-12-13 0:10 ` Johannes Berg
2008-12-09 0:43 ` Dan E
2008-12-09 0:51 ` Johannes Berg
2008-12-09 1:01 ` Dan E
2008-12-09 1:05 ` Johannes Berg
2009-01-15 7:52 ` David Shwatrz
2009-01-15 9:35 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4941EF69.5040108@erley.org \
--to=pat-lkml@erley.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.