All of lore.kernel.org
 help / color / mirror / Atom feed
From: leen smit <leen@service2media.com>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] hwmon-vid: requested unknown VRM version
Date: Fri, 12 Dec 2008 11:54:29 +0000	[thread overview]
Message-ID: <494250F5.2030607@service2media.com> (raw)


Dear all,

Im running lm-sensors on a HP thinclient wich i use as a fileserver.
I first installed from the repositories, but I got a VRM error when 
running sensors. After that i remove the package and compiled the latest 
version from source. Again, with the same error.
THe output of sensors is OK. That is, its show the 
voltages/temperatures.  But what ever I try, I keep getting the vrm 
error on my console. I've been searching through the archives and found 
similair problems but i couldnt get the patches  out of this messages 
(garbled in the archive?)
I've also tried disabling the loaded modules one by one, in the idle 
hope that might make difference.. no success..

Other thing i tried changes some setting in the .conf file again to no 
avail..

im not sure if I can supply more detail for the error. The error as 
mentioned in the title is all I see in my logs

At the moment it workable, but my logs get quite bijg, and working on a 
tty is inpossible because the errors is spammed on all consoles.

Any help would be greatly appreciated!

Leen Smit


debian stable, kernel 2.6.18-6-686
sensors version 3.0.3 with libsensors version 3.0.3
/etc/modules
i2c-ali1563
# Chip drivers
smsc47m192
smsc47m1


CPU: Transmeta Efficeon(tm) Processor TM8000
  System Info: #1
    Manufacturer: "Hewlett-Packard"
    Product: "hp t5000 series"
    Serial: "CNV534052J"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Hewlett-Packard"
    Product: "098Ch"
    Serial: "CNV534052J"

PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
  Model: "ATI Radeon VE"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x5159 "Radeon VE"





_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

                 reply	other threads:[~2008-12-12 11:54 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=494250F5.2030607@service2media.com \
    --to=leen@service2media.com \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.