From: Jens Gehrlein <sew_s@tqs.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mpc83xx: Size optimization of start.S
Date: Tue, 16 Dec 2008 08:58:03 +0100 [thread overview]
Message-ID: <49475F8B.1090502@tqs.de> (raw)
In-Reply-To: <20081215170055.GA30730@ld0162-tx32.am.freescale.net>
Hi Scott,
Scott Wood schrieb:
> On Mon, Dec 15, 2008 at 08:26:03AM +0100, Jens Gehrlein wrote:
>> Hi Ron,
>>
>> Ron Madrid schrieb:
>>> Currently there are in excess of 100 bytes located at the beginning of the image
>>> built by start.S that are not being utilized.
>> Hmmm, are you sure? What if someone designs a board, where the processor
>> shall load its reset configuration from a local bus EEPROM, e.g. the
>> same NOR-Flash containing the U-Boot image (CFG_RESET_SOURCE[0:2] =
>> 000b?
>>
>> Or did I misunderstand something?
>
> That's covered by the _HRCW_TABLE_ENTRY lines earlier in the file.
I see. I understood Ron's comment as "first 100 hex bytes".
Thanks for the hint, Scott.
Kind regards,
Jens
next prev parent reply other threads:[~2008-12-16 7:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-12 21:12 [U-Boot] [PATCH] mpc83xx: Size optimization of start.S Ron Madrid
2008-12-15 7:26 ` Jens Gehrlein
2008-12-15 17:00 ` Scott Wood
2008-12-16 7:58 ` Jens Gehrlein [this message]
2009-01-12 18:52 ` Ron Madrid
2009-01-22 0:55 ` Kim Phillips
2009-01-22 18:00 ` Ron Madrid
2009-01-22 18:37 ` Kim Phillips
2009-01-22 21:37 ` Ron Madrid
2009-01-22 22:32 ` Kim Phillips
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49475F8B.1090502@tqs.de \
--to=sew_s@tqs.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.