From: Udo van den Heuvel <udovdh@xs4all.nl>
To: alsa-devel@alsa-project.org
Subject: ice1712 error
Date: Fri, 19 Dec 2008 16:38:50 +0100 [thread overview]
Message-ID: <494BC00A.9080202@xs4all.nl> (raw)
Hello,
I found out the ICE1712 card is sometimes detected OK and sometimes
isn't detected correctly.
Cold boot/warm boot doesn't really matter.
I tried kernel 2.6.27.9 and older.
Card is is fine when detected.
Behaviour doesn't change when I try a different PCI slot.
When the card fails:
# dmesg|grep 01:09
PCI: 0000:01:09.0 reg 10 io port: [a000, a01f]
PCI: 0000:01:09.0 reg 14 io port: [a400, a40f]
PCI: 0000:01:09.0 reg 18 io port: [a800, a80f]
PCI: 0000:01:09.0 reg 1c io port: [ac00, ac3f]
pci 0000:01:09.0: supports D2
ICE1712: probe of 0000:01:09.0 failed with error -12
When the card is OK:
PCI: 0000:01:09.0 reg 10 io port: [a000, a01f]
PCI: 0000:01:09.0 reg 14 io port: [a400, a40f]
PCI: 0000:01:09.0 reg 18 io port: [a800, a80f]
PCI: 0000:01:09.0 reg 1c io port: [ac00, ac3f]
pci 0000:01:09.0: supports D2
ICE1712 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) ->
IRQ 19
I booted into single user mode each time and checked /proc/asound/cards
after each boot and then looked at dmesg.
Does this mean the card is toast?
What does the -12 mean?
What should I try next?
Kind regards,
Udo
next reply other threads:[~2008-12-19 15:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-19 15:38 Udo van den Heuvel [this message]
2008-12-19 15:46 ` ice1712 error Takashi Iwai
2008-12-19 16:00 ` Udo van den Heuvel
2008-12-19 16:11 ` Takashi Iwai
2008-12-19 16:21 ` Udo van den Heuvel
2008-12-19 17:01 ` Takashi Iwai
2008-12-19 17:18 ` Udo van den Heuvel
2008-12-20 8:37 ` Takashi Iwai
2008-12-20 11:11 ` Udo van den Heuvel
2008-12-20 12:56 ` Udo van den Heuvel
2008-12-20 15:40 ` Takashi Iwai
2008-12-20 16:22 ` Udo van den Heuvel
[not found] ` <4A460396.2070309@xs4all.nl>
2009-06-28 8:39 ` Takashi Iwai
[not found] ` <4A472D18.1010201@xs4all.nl>
2009-06-28 9:02 ` Takashi Iwai
2008-12-19 17:28 ` John Rigg
2008-12-19 17:38 ` Udo van den Heuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=494BC00A.9080202@xs4all.nl \
--to=udovdh@xs4all.nl \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.