From: Max Waterman <davidmaxwaterman@fastmail.co.uk>
To: LinuxRaid <linux-raid@vger.kernel.org>
Subject: Re: Supermicro AOC-SAT2-MV8
Date: Sat, 20 Dec 2008 00:07:05 +0200 [thread overview]
Message-ID: <494C1B09.3000403@fastmail.co.uk> (raw)
In-Reply-To: <C571C6FB.BA32%groups@email.iain.rauch.co.uk>
Iain Rauch wrote:
>> I'm looking into getting another drive and have noticed I've run out of
>> SATA ports (and EIDE, as it happens).
>>
>> So, I'm looking at a PCI card for SATA and went back to look at that
>> Supermicro AOC-SAT2-MV8 card - I've had my eye on it for a few years, or
>> perhaps it was a previous version of the same thing, I'm not sure.
>>
>> Anyway, I'm worried that it isn't the correct bus type for my computer.
>> I'm confused by the PCI-X and PCIe types, and I don't have access to my
>> computer over Christmas.
>>
>> My motherboard is some consumer level MSI board, and I just added an
>> nVidia graphics card on the same bus (it used one of the two longer slots).
>>
>> Could someone with better knowledge of such things hazzard a guess?
>>
>
> I'm sure you will have PCI on your board, but it's unlikely that you have
> PCI-X. You can use the PCI-X card in a PCI slot, but the speed will be
> reduced.
> If you have PCIe slots (which is likely if the board is less than a couple
> of years old), you are better to use them as they are faster than PCI/PCI-X.
>
OK, so it sounds like my suspicions were correct - I have PCI/PCIe.
You say I would be better to use PCIe, but the card is PCI-X. Can I use
PCI-X in a PCIe slot?
Max.
>
> Iain
>
>
>
next prev parent reply other threads:[~2008-12-19 22:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-19 21:31 Supermicro AOC-SAT2-MV8 Max Waterman
2008-12-19 21:47 ` Iain Rauch
2008-12-19 22:07 ` Max Waterman [this message]
2008-12-19 22:15 ` Iain Rauch
2008-12-20 5:17 ` Brad Campbell
2008-12-20 9:36 ` Justin Piszcz
2008-12-19 23:10 ` Wolfgang Denk
2008-12-19 23:07 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=494C1B09.3000403@fastmail.co.uk \
--to=davidmaxwaterman@fastmail.co.uk \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.