Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27-gentoo-r5 (root@shadow) (gcc version 4.3.2 (Gentoo 4.3.2 p1.2) ) #5 SMP Mon Dec 15 19:50:28 ARST 2008 Command line: root=/dev/sda6 video=uvesafb:mtrr:3,ywrap,1680x1050-32@60 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c000 (usable) BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ebc1000 (usable) BIOS-e820: 000000007ebc1000 - 000000007ec44000 (ACPI NVS) BIOS-e820: 000000007ec44000 - 000000007fdd8000 (usable) BIOS-e820: 000000007fdd8000 - 000000007fdda000 (reserved) BIOS-e820: 000000007fdda000 - 000000007fe90000 (usable) BIOS-e820: 000000007fe90000 - 000000007fee5000 (ACPI NVS) BIOS-e820: 000000007fee5000 - 000000007fee6000 (usable) BIOS-e820: 000000007fee6000 - 000000007fef2000 (ACPI data) BIOS-e820: 000000007fef2000 - 000000007fef3000 (usable) BIOS-e820: 000000007fef3000 - 000000007feff000 (ACPI data) BIOS-e820: 000000007feff000 - 000000007ff00000 (usable) BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7ff00 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 007fe00000 page 2M 007fe00000 - 007ff00000 page 4k kernel direct mapping tables up to 7ff00000 @ 8000-c000 last_map_addr: 7ff00000 end: 7ff00000 ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7FEFD038, 0068 (r1 INTEL DX38BT 5F1 1000013) ACPI: FACP 7FEFC000, 0074 (r1 INTEL DX38BT 5F1 MSFT 1000013) ACPI: DSDT 7FEF7000, 4076 (r1 INTEL DX38BT 5F1 MSFT 1000013) ACPI: FACS 7FE9F000, 0040 ACPI: APIC 7FEF6000, 0078 (r1 INTEL DX38BT 5F1 MSFT 1000013) ACPI: WDDT 7FEF5000, 0040 (r1 INTEL DX38BT 5F1 MSFT 1000013) ACPI: MCFG 7FEF4000, 003C (r1 INTEL DX38BT 5F1 MSFT 1000013) ACPI: ASF! 7FEF3000, 00A6 (r32 INTEL DX38BT 5F1 MSFT 1000013) ACPI: DMAR 7FEF1000, 0120 (r1 INTEL DX38BT 5F1 MSFT 1000013) ACPI: SSDT 7FEEE000, 0204 (r1 INTEL CpuPm 5F1 MSFT 1000013) ACPI: SSDT 7FEED000, 01F9 (r1 INTEL Cpu0Ist 5F1 MSFT 1000013) ACPI: SSDT 7FEEC000, 01F9 (r1 INTEL Cpu1Ist 5F1 MSFT 1000013) ACPI: SSDT 7FEEB000, 01F9 (r1 INTEL Cpu2Ist 5F1 MSFT 1000013) ACPI: SSDT 7FEEA000, 01F9 (r1 INTEL Cpu3Ist 5F1 MSFT 1000013) ACPI: SSDT 7FEE9000, 01CF (r1 INTEL Cpu0Cst 5F1 MSFT 1000013) ACPI: SSDT 7FEE8000, 01CF (r1 INTEL Cpu1Cst 5F1 MSFT 1000013) ACPI: SSDT 7FEE7000, 01CF (r1 INTEL Cpu2Cst 5F1 MSFT 1000013) ACPI: SSDT 7FEE6000, 01CF (r1 INTEL Cpu3Cst 5F1 MSFT 1000013) ACPI: WDTT 7FEEF000, 02CC (r1 INTEL DX38BT 5F1 MSFT 1000013) ACPI: ASPT 7FEF0000, 002C (r1 INTEL PerfTune 5F1 MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-000000007ff00000 Bootmem setup node 0 0000000000000000-000000007ff00000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000a000 - 0000000000019fdf] pages 10 (5 early reservations) ==> bootmem [0000000000 - 007ff00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000074fcbc] TEXT DATA BSS ==> [0000200000 - 000074fcbc] #3 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000000 -> 0x0000009c 0: 0x00000100 -> 0x0007ebc1 0: 0x0007ec44 -> 0x0007fdd8 0: 0x0007fdda -> 0x0007fe90 0: 0x0007fee5 -> 0x0007fee6 0: 0x0007fef2 -> 0x0007fef3 0: 0x0007feff -> 0x0007ff00 On node 0 totalpages: 523690 DMA zone: 2476 pages, LIFO batch:0 DMA32 zone: 512585 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat SMP: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000007ebc1000 - 000000007ec44000 PM: Registered nosave memory: 000000007fdd8000 - 000000007fdda000 PM: Registered nosave memory: 000000007fe90000 - 000000007fee5000 PM: Registered nosave memory: 000000007fee6000 - 000000007fef2000 PM: Registered nosave memory: 000000007fef3000 - 000000007feff000 Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) PERCPU: Allocating 45536 bytes of per cpu data NR_CPUS: 4, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 515061 Policy zone: DMA32 Kernel command line: root=/dev/sda6 video=uvesafb:mtrr:3,ywrap,1680x1050-32@60 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 2400.078 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2060160k/2096128k available (3130k kernel code, 34600k reserved, 1393k data, 380k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.15 BogoMIPS (lpj=2400078) Security Framework initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Using local APIC timer interrupts. APIC timer calibration result 16667211 Detected 16.667 MHz APIC timer. Booting processor 1/2 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.17 BogoMIPS (lpj=2400085) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4800.15 BogoMIPS (lpj=2400079) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4800.16 BogoMIPS (lpj=2400081) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM2) CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (19200.64 BogoMIPS). net_namespace: 1160 bytes Time: 17:47:14 Date: 12/19/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f7ffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:19.0 reg 10 32bit mmio: [90300000, 9031ffff] PCI: 0000:00:19.0 reg 14 32bit mmio: [90324000, 90324fff] PCI: 0000:00:19.0 reg 18 io port: [4400, 441f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [40e0, 40ff] PCI: 0000:00:1a.1 reg 20 io port: [40c0, 40df] PCI: 0000:00:1a.2 reg 20 io port: [40a0, 40bf] PCI: 0000:00:1a.7 reg 10 32bit mmio: [90325c00, 90325fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [90320000, 90323fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f] PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f] PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [90325800, 90325bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [4428, 442f] PCI: 0000:00:1f.2 reg 14 io port: [4434, 4437] PCI: 0000:00:1f.2 reg 18 io port: [4420, 4427] PCI: 0000:00:1f.2 reg 1c io port: [4430, 4433] PCI: 0000:00:1f.2 reg 20 io port: [4020, 403f] PCI: 0000:00:1f.2 reg 24 32bit mmio: [90325000, 903257ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 10 64bit mmio: [90326000, 903260ff] PCI: 0000:00:1f.3 reg 20 io port: [4000, 401f] PCI: 0000:01:00.0 reg 10 64bit mmio: [80000000, 8fffffff] PCI: 0000:01:00.0 reg 18 64bit mmio: [90200000, 9020ffff] PCI: 0000:01:00.0 reg 20 io port: [3000, 30ff] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: 0000:01:00.1 reg 10 64bit mmio: [90210000, 90213fff] pci 0000:01:00.1: supports D1 pci 0000:01:00.1: supports D2 PCI: bridge 0000:00:01.0 io port: [3000, 3fff] PCI: bridge 0000:00:01.0 32bit mmio: [90200000, 902fffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [80000000, 8fffffff] PCI: bridge 0000:00:1c.0 32bit mmio: [90400000, 904fffff] PCI: 0000:03:00.0 reg 10 io port: [2018, 201f] PCI: 0000:03:00.0 reg 14 io port: [2024, 2027] PCI: 0000:03:00.0 reg 18 io port: [2010, 2017] PCI: 0000:03:00.0 reg 1c io port: [2020, 2023] PCI: 0000:03:00.0 reg 20 io port: [2000, 200f] PCI: 0000:03:00.0 reg 24 32bit mmio: [90100000, 901003ff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled PCI: bridge 0000:00:1c.4 io port: [2000, 2fff] PCI: bridge 0000:00:1c.4 32bit mmio: [90100000, 901fffff] PCI: 0000:04:02.0 reg 10 io port: [1000, 10ff] PCI: 0000:04:02.0 reg 14 32bit mmio: [90004800, 900048ff] pci 0000:04:02.0: supports D1 pci 0000:04:02.0: supports D2 pci 0000:04:02.0: PME# supported from D1 D2 D3hot D3cold pci 0000:04:02.0: PME# disabled PCI: 0000:04:03.0 reg 10 32bit mmio: [90004000, 900047ff] PCI: 0000:04:03.0 reg 14 32bit mmio: [90000000, 90003fff] pci 0000:04:03.0: supports D1 pci 0000:04:03.0: supports D2 pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [1000, 1fff] PCI: bridge 0000:00:1e.0 32bit mmio: [90000000, 900fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:Host address width 36 DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb00000 DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb01000 DMAR:Device scope device [0000:00:02.00] not found DMAR:Device scope device [0000:00:02.00] not found DMAR:Device scope device [0000:00:02.01] not found DMAR:Device scope device [0000:00:02.01] not found DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb02000 DMAR:Device scope device [0000:00:03.00] not found DMAR:Device scope device [0000:00:03.00] not found DMAR:Device scope device [0000:00:03.02] not found DMAR:Device scope device [0000:00:03.02] not found DMAR:Device scope device [0000:00:03.03] not found DMAR:Device scope device [0000:00:03.03] not found DMAR:DRHD (flags: 0x00000001)base: 0x00000000feb03000 DMAR:RMRR base: 0x00000000000e0000 end: 0x00000000000effff DMAR:RMRR base: 0x0000000080000000 end: 0x000000007fffffff DMAR:Device scope device [0000:00:02.00] not found DMAR:Device scope device [0000:00:02.00] not found DMAR:Device scope device [0000:00:02.01] not found DMAR:Device scope device [0000:00:02.01] not found IOMMU: Setting identity map for device 0000:00:1d.0 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.1 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.2 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.7 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.0 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.1 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.2 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.7 [0xe0000 - 0xf0000] IOMMU: gfx device 0000:01:00.0 1-1 mapping IOMMU: Setting identity map for device 0000:01:00.0 [0x0 - 0x9c000] IOMMU: Setting identity map for device 0000:01:00.0 [0x100000 - 0x7ebc1000] IOMMU: Setting identity map for device 0000:01:00.0 [0x7ec44000 - 0x7fdd8000] IOMMU: Setting identity map for device 0000:01:00.0 [0x7fdda000 - 0x7fe90000] IOMMU: Setting identity map for device 0000:01:00.0 [0x7fee5000 - 0x7fee6000] IOMMU: Setting identity map for device 0000:01:00.0 [0x7fef2000 - 0x7fef3000] IOMMU: Setting identity map for device 0000:01:00.0 [0x7feff000 - 0x7ff00000] IOMMU: Prepare 0-16M unity mapping for LPC IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O PCI-GART: No AMD northbridge found. hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff has been reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x3000-0x3fff pci 0000:00:01.0: MEM window: 0x90200000-0x902fffff pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0x90400000-0x904fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.4: IO window: 0x2000-0x2fff pci 0000:00:1c.4: MEM window: 0x90100000-0x901fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: 0x1000-0x1fff pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0000 -> 0002) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [3000, 3fff] bus: 01 index 1 mmio: [90200000, 902fffff] bus: 01 index 2 mmio: [80000000, 8fffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [90400000, 904fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [2000, 2fff] bus: 03 index 1 mmio: [90100000, 901fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [1000, 1fff] bus: 04 index 1 mmio: [90000000, 900fffff] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 io port: [0, ffff] bus: 04 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 audit: initializing netlink socket (disabled) type=2000 audit(1229708834.444:1): initialized msgmni has been set to 4023 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service Non-volatile memory driver v1.2 Linux agpgart interface v0.103 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button (CM) [SLPB] Monitor-Mwait will be used to enter C-1 state processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) processor ACPI0007:02: registered as cooling_device2 ACPI: Processor [CPU2] (supports 8 throttling states) processor ACPI0007:03: registered as cooling_device3 ACPI: Processor [CPU3] (supports 8 throttling states) loop: module loaded Loading iSCSI transport class v2.0-870. Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325100 irq 378 ata2: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325180 irq 378 ata3: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325200 irq 378 ata4: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325280 irq 378 ata5: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325300 irq 378 ata6: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325380 irq 378 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: MAXTOR STM3160215AS, 4.AAB, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA MAXTOR STM316021 4.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_marvell 0000:03:00.0: setting latency timer to 64 scsi6 : pata_marvell scsi7 : pata_marvell ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 16 ata8: PATA max UDMA/133 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 16 ata7.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133 ata7.00: 160836480 sectors, multi 16: LBA48 ata7.01: ATA-5: WDC WD400EB-00CPF0, 06.04G06, max UDMA/100 ata7.01: 78165360 sectors, multi 16: LBA ata7.00: configured for UDMA/100 ata7.01: configured for UDMA/100 scsi 6:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5 sd 6:0:0:0: [sdb] 160836480 512-byte hardware sectors (82348 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: [sdb] 160836480 512-byte hardware sectors (82348 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 > sd 6:0:0:0: [sdb] Attached SCSI disk sd 6:0:0:0: Attached scsi generic sg1 type 0 scsi 6:0:1:0: Direct-Access ATA WDC WD400EB-00CP 06.0 PQ: 0 ANSI: 5 sd 6:0:1:0: [sdc] 78165360 512-byte hardware sectors (40021 MB) sd 6:0:1:0: [sdc] Write Protect is off sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00 sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:1:0: [sdc] 78165360 512-byte hardware sectors (40021 MB) sd 6:0:1:0: [sdc] Write Protect is off sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00 sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 > sd 6:0:1:0: [sdc] Attached SCSI disk sd 6:0:1:0: Attached scsi generic sg2 type 0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 17, io mem 0x90325c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-gentoo-r5 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90325800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-gentoo-r5 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-gentoo-r5 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-gentoo-r5 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 17, io base 0x000040a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-gentoo-r5 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 3-2: configuration #1 chosen from 1 choice usb 3-2: New USB device found, idVendor=045e, idProduct=00e3 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Microsoft Wireless Optical Desktop��� 2.20 usb 3-2: Manufacturer: Microsft usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27-gentoo-r5 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27-gentoo-r5 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.27-gentoo-r5 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev input: Microsft Microsoft Wireless Optical Desktop��� 2.20 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3 input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Optical Desktop��� 2.20] on usb-0000:00:1a.0-2 input: Microsft Microsoft Wireless Optical Desktop��� 2.20 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input4 input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Optical Desktop��� 2.20] on usb-0000:00:1a.0-2 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. registered taskstats version 1 Magic number: 4:504:795 ReiserFS: sda6: found reiserfs format "3.6" with standard journal ReiserFS: sda6: using ordered data mode ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda6: checking transaction log (sda6) ReiserFS: sda6: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 380k freed i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 8139too Fast Ethernet driver 0.9.28 8139too 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 eth0: RealTek RTL8139 at 0x1000, 00:40:f4:2d:78:cb, IRQ 18 eth0: Identified 8139 chip type 'RTL-8139C' udev: renamed network interface eth0 to eth1 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:26:4d:96 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes. [fglrx] vendor: 1002 device: 9501 count: 1 [fglrx] ioport: bar 4, base 0x3000, size: 0x100 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Driver built-in PAT support is enabled successfully [fglrx] module loaded - fglrx 8.56.4 [Dec 1 2008] with 1 minors i2c /dev entries driver coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! coretemp coretemp.2: Using relative temperature scale! coretemp coretemp.3: Using relative temperature scale! ReiserFS: sda5: found reiserfs format "3.6" with standard journal ReiserFS: sda5: using ordered data mode ReiserFS: sda5: journal params: device sda5, size 3965, journal first block 130, max trans len 128, max batch 112, max commit age 30, max trans age 30 ReiserFS: sda5: checking transaction log (sda5) ReiserFS: sda5: Using r5 hash to sort names ReiserFS: sda5: Removing [1119081 1119083 0x0 SD]..done ReiserFS: sda5: There were 1 uncompleted unlinks/truncates. Completed ReiserFS: sda8: found reiserfs format "3.6" with standard journal ReiserFS: sda8: using ordered data mode ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda8: checking transaction log (sda8) ReiserFS: sda8: replayed 1 transactions in 0 seconds ReiserFS: sda8: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [fglrx] Gart USWC size:192 M. [fglrx] Gart cacheable size:60 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:ff76000, size:8a000 [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000 BUG: unable to handle kernel paging request at ffff87f5a7ad9cd0 IP: [] leaf_copy_items_entirely+0xaf/0x20f PGD 0 Oops: 0000 [1] SMP CPU 3 Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device fuse ext3 jbd mbcache coretemp hwmon slhc realtek i2c_dev fglrx(P) snd_hda_intel snd_pcm snd_timer snd_page_alloc snd_hwdep snd e1000e 8139too soundcore i2c_i801 Pid: 24078, comm: conftest Tainted: P 2.6.27-gentoo-r5 #5 RIP: 0010:[] [] leaf_copy_items_entirely+0xaf/0x20f RSP: 0018:ffff880071e33328 EFLAGS: 00010246 RAX: ffff880b024855c0 RBX: 0000000052b2a640 RCX: 0000000aad4d5ba8 RDX: ffff8800545d1b60 RSI: ffff87f5a7ad9cd0 RDI: ffff880054fafa18 RBP: ffff880054fafa18 R08: ffff880b024855c0 R09: ffff880b024855c0 R10: 0000000000000004 R11: 0000000004040404 R12: 0000000000000000 R13: 0000000aad4d5ba8 R14: ffff880071e333d8 R15: 0000000000000000 FS: 00007fd1953886f0(0000) GS:ffff88007fb1f880(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff87f5a7ad9cd0 CR3: 0000000075719000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process conftest (pid: 24078, threadinfo ffff880071e32000, task ffff88007d811350) Stack: 00000000803d94bd 8e1cc6dd71e33927 ffff8800545d1b60 ffff880071e333d8 ffff880054fafa00 00040000802b9866 ffff8800545d1af0 000000008e1cc6dc 0000000000000000 ffff8800545d1b60 0000000000000001 ffff880071e333d8 Call Trace: [] ? leaf_move_items+0x2ed/0x34e [] ? do_balance+0x2126/0x27d6 [] ? wake_up_bit+0x11/0x22 [] ? reiserfs_prepare_for_journal+0x5d/0x64 [] ? fix_nodes+0xe0d/0x1071 [] ? __wait_on_bit+0x62/0x70 [] ? scsi_request_fn+0x0/0x395 [] ? reiserfs_paste_into_item+0x101/0x13c [] ? reiserfs_get_block+0xd4f/0xf0f [] ? __block_prepare_write+0x1b3/0x3af [] ? reiserfs_get_block+0x0/0xf0f [] ? block_write_begin+0x77/0xc5 [] ? reiserfs_write_begin+0x145/0x1c7 [] ? reiserfs_get_block+0x0/0xf0f [] ? generic_file_buffered_write+0x146/0x65d [] ? current_fs_time+0x1e/0x24 [] ? file_remove_suid+0x1c/0x4f [] ? __generic_file_aio_write_nolock+0x349/0x37d [] ? generic_file_aio_write+0x64/0xc4 [] ? do_sync_write+0xce/0x113 [] ? do_page_fault+0x467/0x81a [] ? autoremove_wake_function+0x0/0x2e [] ? vfs_write+0xad/0x156 [] ? sys_pwrite64+0x57/0x77 [] ? error_exit+0x0/0x51 [] ? system_call_fastpath+0x16/0x1b Code: 44 29 eb 4a 8d 7c 2d 00 e8 5e b8 05 00 48 63 74 24 0c 48 8b 54 24 10 48 ff c6 48 89 ef 48 6b f6 18 4c 89 e9 48 03 72 28 45 85 e4 a4 66 89 5c 24 2e 48 8b 44 24 20 66 89 58 04 75 0b 48 8b 54 RIP [] leaf_copy_items_entirely+0xaf/0x20f RSP CR2: ffff87f5a7ad9cd0 ---[ end trace 16236b432a58e107 ]--- ------------[ cut here ]------------ WARNING: at kernel/exit.c:1001 do_exit+0x3c/0x807() Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device fuse ext3 jbd mbcache coretemp hwmon slhc realtek i2c_dev fglrx(P) snd_hda_intel snd_pcm snd_timer snd_page_alloc snd_hwdep snd e1000e 8139too soundcore i2c_i801 Pid: 24078, comm: conftest Tainted: P D 2.6.27-gentoo-r5 #5 Call Trace: [] warn_on_slowpath+0x51/0x77 [] enqueue_task_fair+0x22/0x74 [] printk+0x4e/0x58 [] printk+0x4e/0x58 [] do_exit+0x3c/0x807 [] __wake_up+0x38/0x4e [] oops_begin+0x0/0x86 [] do_page_fault+0x74e/0x81a [] zone_statistics+0x3c/0x5f [] __rmqueue+0x1d/0x1fb [] __find_get_block+0x14c/0x15c [] error_exit+0x0/0x51 [] leaf_copy_items_entirely+0xaf/0x20f [] leaf_copy_items_entirely+0x91/0x20f [] leaf_move_items+0x2ed/0x34e [] do_balance+0x2126/0x27d6 [] wake_up_bit+0x11/0x22 [] reiserfs_prepare_for_journal+0x5d/0x64 [] fix_nodes+0xe0d/0x1071 [] __wait_on_bit+0x62/0x70 [] scsi_request_fn+0x0/0x395 [] reiserfs_paste_into_item+0x101/0x13c [] reiserfs_get_block+0xd4f/0xf0f [] __block_prepare_write+0x1b3/0x3af [] reiserfs_get_block+0x0/0xf0f [] block_write_begin+0x77/0xc5 [] reiserfs_write_begin+0x145/0x1c7 [] reiserfs_get_block+0x0/0xf0f [] generic_file_buffered_write+0x146/0x65d [] current_fs_time+0x1e/0x24 [] file_remove_suid+0x1c/0x4f [] __generic_file_aio_write_nolock+0x349/0x37d [] generic_file_aio_write+0x64/0xc4 [] do_sync_write+0xce/0x113 [] do_page_fault+0x467/0x81a [] autoremove_wake_function+0x0/0x2e [] vfs_write+0xad/0x156 [] sys_pwrite64+0x57/0x77 [] error_exit+0x0/0x51 [] system_call_fastpath+0x16/0x1b ---[ end trace 16236b432a58e107 ]---