From: Artem Makhutov <artem@makhutov.org>
To: BOUWSMA Barry <freebeer.bouwsma@gmail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] How to stream DVB-S2 channels over network?
Date: Mon, 22 Dec 2008 12:18:57 +0100 [thread overview]
Message-ID: <494F77A1.1040209@makhutov.org> (raw)
In-Reply-To: <alpine.DEB.2.00.0812211542250.22383@ybpnyubfg.ybpnyqbznva>
Hi,
BOUWSMA Barry schrieb:
> On Sun, 21 Dec 2008, Artem Makhutov wrote:
>
>>> Use the `-o:' option of `dvbstream' to write to a file,
>>> then see if this file is corrupted or damaged. If this
>>> is so, then case 1 above would be correct.
>
>> Everything looks like my SkyStar HD/TT-3200 is producing a little bit
>> currupt stream for DVB-S2 under linux. DVB-S looks prette good.
>> I will try to playback the recorded stream under Windows
>> today afternoon.
>
> Hi, me again :-) Sorry to be writing so much today...
No problem :)
> I actually do not know if you are receiving ASTRA HD from
> 19E2, or from elsewhere, and I now realize that earlier,
> I assumed that you did...
My dish is pointing to Astra 19.2E.
> As I noted in my last mail, please try `mplayer -vo null
> etc.' to detect corrupted video. The `-nosound' option
> means that every frame will be checked, no matter how
> slow my^H^H your machine.
>
> In case the bandwidth is of concern, because I do not
> know what to expect from HD DVB-S2 transponders...
>
> I'm assuming, from your headers, you're somewhere in
> germany -- if you are within the Astra 2D footprint at
> 28E2, meaning, the west or northwest, you can receive
> the BBC-HD signal with a reasonable dish -- this will
> fill about 7 to 8GB per hour on disk, and is sent via
> DVB-S at present. Around Berlin, you'll need perhaps a
> 2 metre dish. If you can tune it, this will give a DVB-S
> reference at a decent bitrate, probably similar to ASTRA
> HD.
>
> Alternatively, on DVB-S, Eins Festival HD starts in less
> than 24 hours; the bitrate is not so high -- I have some
> files from the past Easter holiday that require, for
> example, 21GB from somtime after 13h to just after 17h,
> so a bit better than good quality SD video, but slightly
> less than the BBC-HD stream. Both these are H.264.
>
> With a few hours of suitable HD recording, you can then
> definitively say, oh yeah, the -S2 transport streams are
> indeed corrupt and the -S streams perfect, or not, or
> something. That would be very useful, if it isn't
> already widely known.
Yes, I will try it out today.
Regards, Artem
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-12-22 11:19 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-20 22:45 [linux-dvb] How to stream DVB-S2 channels over network? Artem Makhutov
2008-12-21 2:29 ` BOUWSMA Barry
2008-12-21 2:44 ` hermann pitton
2008-12-21 13:59 ` Artem Makhutov
2008-12-21 14:39 ` BOUWSMA Barry
2008-12-22 11:26 ` Artem Makhutov
2008-12-21 22:41 ` hermann pitton
2008-12-21 14:04 ` Artem Makhutov
2008-12-21 14:58 ` BOUWSMA Barry
2008-12-22 11:18 ` Artem Makhutov [this message]
2008-12-21 13:15 ` Michel Verbraak
2008-12-21 13:26 ` Artem Makhutov
2008-12-21 14:16 ` BOUWSMA Barry
2008-12-22 11:16 ` Artem Makhutov
2008-12-30 14:45 ` Nico Sabbi
[not found] ` <854d46170812201646u3414788dh6cbbe6eb9c9ba8ca@mail.gmail.com>
2008-12-21 13:51 ` Artem Makhutov
2009-01-01 18:53 ` Brice DUBOST
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=494F77A1.1040209@makhutov.org \
--to=artem@makhutov.org \
--cc=freebeer.bouwsma@gmail.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.