From: Khem Raj <raj.khem@gmail.com>
To: openembedded-core@lists.openembedded.org
Subject: Re: [PATCH 2/3] package(rootfs)_ipk.bbclass: support multilib in opkg backend.
Date: Sat, 30 Jul 2011 09:23:26 -0700 [thread overview]
Message-ID: <4953517.rmrrWIv0Tx@perseus> (raw)
In-Reply-To: <98d2970ed91756d79ee3903dc0fd3d907d9bdf65.1311720062.git.richard.purdie@linuxfoundation.org>
On Tuesday, July 26, 2011 11:50:26 PM Richard Purdie wrote:
> From: Lianhao Lu <lianhao.lu@intel.com>
>
> Support install multiple multilib in opkg backend.
>
> The installation is done in 3 phases.
>
> Phase 1: install normal packages to IMAGE_ROOTFS.
>
> Phase 2: install multilib packages under MULTILIB_TEMP_ROOTFS. Packages
> belongs to the same multilib arch would be installed to a unique
> directory.
>
> Phase 3: check file confliction between IMAGE_ROOTFS and
> MULTILIB_TEMP_ROOTFS, install multilib packages to IMAGE_ROOTFS only if
> the sanity check passed.
>
> Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
> ---
> meta/classes/package_ipk.bbclass | 51
> ++++++++++++++++++++++++++++++++++++++ meta/classes/rootfs_ipk.bbclass |
> 2 +
> 2 files changed, 53 insertions(+), 0 deletions(-)
>
> diff --git a/meta/classes/package_ipk.bbclass
> b/meta/classes/package_ipk.bbclass index 0c0f00d..b7afa83 100644
> --- a/meta/classes/package_ipk.bbclass
> +++ b/meta/classes/package_ipk.bbclass
> @@ -61,6 +61,28 @@ python package_ipk_install () {
> raise bb.build.FuncFailed
> }
>
> +package_tryout_install_multilib_ipk() {
> + #try install multilib
> + multilib_tryout_dirs=""
> + for arch in ${MULTILIB_ARCHS}; do
> + local target_rootfs="${MULTILIB_TEMP_ROOTFS}/${arch}"
> + local ipkg_args="-f ${INSTALL_CONF_IPK} -o ${target_rootfs}
> --force_overwrite" + local selected_pkg=""
> + #strip the "ml" from package_arch
> + local pkgarch_prefix="${arch:2}-"
> + for pkg in "${INSTALL_PACKAGES_MULTILIB_IPK}"; do
> + if [ ${pkg:0:${#pkgarch_prefix}} == ${pkgarch_prefix} ]; then
> + selected_pkg="${selected_pkg} ${pkg}"
> + fi
> + done
> + if [ ! -z "${selected_pkg}" ]; then
> + mkdir -p ${target_rootfs}/${opkglibdir}
> + opkg-cl ${ipkg_args} update
> + opkg-cl ${ipkg_args} install ${selected_pkg}
> + multilib_tryout_dirs="${multilib_tryout_dirs} ${target_rootfs}"
> + fi
> + done
> +}
we use --force-overwrite and if mistakenly if a multilib package installs into
standard paths will opkg inform about it ?
> #
> # install a bunch of packages using opkg
> # the following shell variables needs to be set before calling this func:
> @@ -78,6 +100,7 @@ package_install_internal_ipk() {
> local package_to_install="${INSTALL_PACKAGES_NORMAL_IPK}"
> local package_attemptonly="${INSTALL_PACKAGES_ATTEMPTONLY_IPK}"
> local package_lingusa="${INSTALL_PACKAGES_LINGUAS_IPK}"
> + local package_multilib="${INSTALL_PACKAGES_MULTILIB_IPK}"
> local task="${INSTALL_TASK_IPK}"
>
> mkdir -p ${target_rootfs}${localstatedir}/lib/opkg/
> @@ -102,6 +125,14 @@ package_install_internal_ipk() {
> if [ ! -z "${package_attemptonly}" ]; then
> opkg-cl ${ipkg_args} install ${package_attemptonly} >
> "${WORKDIR}/temp/log.do_${task}_attemptonly.${PID}" || true fi
> +
> + package_tryout_install_multilib_ipk
> + #sanity check
> + multilib_sanity_check ${target_rootfs} ${multilib_tryout_dirs}|| exit 1
> +
> + if [ ! -z "${package_multilib}" ]; then
> + opkg-cl ${ipkg_args} install ${package_multilib}
> + fi
> }
>
> ipk_log_check() {
> @@ -142,6 +173,11 @@ package_update_index_ipk () {
> packagedirs="$packagedirs ${DEPLOY_DIR_IPK}/$arch
> ${DEPLOY_DIR_IPK}/$sdkarch-nativesdk" done
>
> + multilib_archs="${MULTILIB_ARCHS}"
> + for arch in $multilib_archs; do
> + packagedirs="$packagedirs ${DEPLOY_DIR_IPK}/$arch"
> + done
> +
> for pkgdir in $packagedirs; do
> if [ -e $pkgdir/ ]; then
> touch $pkgdir/Packages
> @@ -173,6 +209,13 @@ package_generate_ipkg_conf () {
> echo "src oe-$sdkarch$extension
> file:${DEPLOY_DIR_IPK}/$sdkarch$extension" >> ${IPKGCONF_SDK} fi
> done
> +
> + multilib_archs="${MULTILIB_ARCHS}"
> + for arch in $multilib_archs; do
> + if [ -e ${DEPLOY_DIR_IPK}/$arch/Packages ] ; then
> + echo "src oe-$arch file:${DEPLOY_DIR_IPK}/$arch" >>
> ${IPKGCONF_TARGET} + fi
> + done
> }
>
> package_generate_archlist () {
> @@ -188,6 +231,14 @@ package_generate_archlist () {
> echo "arch $sdkarch$extension $priority" >> ${IPKGCONF_SDK}
> priority=$(expr $priority + 5)
> done
> +
> + multilib_archs="${MULTILIB_ARCHS}"
> + for arch in $multilib_archs; do
> + echo "arch $arch $priority" >> ${IPKGCONF_TARGET}
> + priority=$(expr $priority + 5)
> + done
> +
> +
> }
>
> python do_package_ipk () {
> diff --git a/meta/classes/rootfs_ipk.bbclass
> b/meta/classes/rootfs_ipk.bbclass index 4fcacc6..695bee0 100644
> --- a/meta/classes/rootfs_ipk.bbclass
> +++ b/meta/classes/rootfs_ipk.bbclass
> @@ -22,6 +22,7 @@ opkglibdir = "${localstatedir}/lib/opkg"
>
> # Which packages to not install on the basis of a recommendation
> BAD_RECOMMENDATIONS ?= ""
> +MULTILIBRE_ALLOW_REP = "${opkglibdir}"
>
> fakeroot rootfs_ipk_do_rootfs () {
> set -x
> @@ -58,6 +59,7 @@ fakeroot rootfs_ipk_do_rootfs () {
> export INSTALL_ROOTFS_IPK="${IMAGE_ROOTFS}"
> export INSTALL_CONF_IPK="${IPKGCONF_TARGET}"
> export INSTALL_PACKAGES_NORMAL_IPK="${PACKAGE_INSTALL}"
> + export INSTALL_PACKAGES_MULTILIB_IPK="${MULTILIB_PACKAGE_INSTALL}"
>
> package_install_internal_ipk
--
Khem Raj
next prev parent reply other threads:[~2011-07-30 16:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-26 22:50 [PATCH 0/3] Multilib image/package backend enablement Richard Purdie
2011-07-26 22:50 ` [PATCH 1/3] package/rootfs_rpm: Implement RPM multilib package handling Richard Purdie
2011-07-27 3:18 ` Mark Hatle
2011-07-26 22:50 ` [PATCH 2/3] package(rootfs)_ipk.bbclass: support multilib in opkg backend Richard Purdie
2011-07-30 16:23 ` Khem Raj [this message]
2011-08-01 1:12 ` Lu, Lianhao
2011-07-26 22:50 ` [PATCH 3/3] image.bbclass: Added variables for multilib support Richard Purdie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4953517.rmrrWIv0Tx@perseus \
--to=raj.khem@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.